• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.06a
• /
• pp.30-31
• /
• 2009

Through the full scale ship collision response analysis of high speed passenger ship with underwater floating matters, the objective of this study is to perform the crashworthy safety assessment of its hull and passengers. For this safety assessment, diverse collision scenarios could be established through the thorough understanding of damage mechanisms due to the collision of its hydrofoil system with underwater floating matter examining the damage informations of its hull and passengers from the collision accidents, and through the estimation of the damages of its hull and passenger. The next step, crashworthy safety assessment of its hull and passengers, was carried out by the collision response analyses of high speed passenger ship with underwater floating matter using Fluid-Structure Interaction(FSI) analysis technique of LS-DYNA code in consideration of surrounding water, and using local zooming analysis technique.

• The Academic Congress of Korean Shoulder and Elbow Society
• /
• 1995.05a
• /
• pp.7-7
• /
• 1995

최근에 스키가 동계스포츠로 각광받으면서 스키인구가 폭발적으로 증가함에 따라 스키손상도 많이 발생하게 되어 스키손상은 스포츠외상에서 중요한 비중을 차지하게 되었다. 스키인구의 증가에 따라 스키손상에 대한 정확한 분석과 이에 대한 예방대책이 절실히 요구되며 이에 경희대학교 의과대학 정형외과학 교실에서는 1982년 12월부터 1995년 3월까지( 1986년과 1987년을 제외 ) 11년간 용평스키장내에 동계스포츠클리닉을 개설하여 상기 기간 중 내장한 총 스키인구 3,093,667명중 스키손상으로 동계스포츠클리닉에 내원한 7,172명의 환자$(0.23\%)$에 대하여 스키손상의 년도별 발생빈도, 스키손상의 특징 스키골절과 탈구의 발생빈도 및 특징 등에 대하여 11년 간의 변화추세를 분석하였다. 11년 간의 스키장의 내장객수는 1983년을 기준 (83,100)으로 하였을 때 1995년에 $977\%로 국부 큰 증가를 보였으며, 스키인구 1000명당 손상율은 1983년의 3.4에서 1995년의 1.4(평균 2.3)로 감소하는 추세를 보였다. 스키손상의 형태는 단순열상 및 타박상등을 제외하고 슬관절 인대손상이 $22.6\%로 가장 많이 발생하였으며, 조사기간동안 수치상의 의미 있는 변화는 없었다. 스키골절 및 탈구는 스키인구 1000명당 평균 0.35였으며, 1983년의 0.90으로부터 점차 감소하여 1995년에는 0.21에 이르렀다. 연령별 스키골절 및 탈구는 20세 이하에서 평균 $41.6\%로 전체적으로 성인에서 더 많이 발생하였으며, 이는 처음 3년 간 20세 이하 골절 및 탈구가 $70.5\%로 높은 발생빈도를 보였으나 1995년도의 20세 이하 골절 및 탈구가$30.3\%까지 감소하게되어 년도가 증가함에 따라 청장년 층에 비하여 소아골절 및 탈구가 전체적으로 감소하는 경향을 보였다. 스키골절의 부위별 발생빈도는 1990년 이전까지 하지골절 및 탈구가 많았으나 이후 점차 상지의 골절 탈구가 증가하였다 하지에서 가장 많은 골절은 경골 골절이었으며, 경골골절은 회전력에 의한 나선형골절이 $76.5\%로 가장 많았고 년도에 따른 변화는 보이지 않았다. 스키손상의 발생빈도는 초기에 비하여 점차 감소하는 경향을 보였으며, 손상의 특성도 부위별, 연령별로 다양한 변화를 나타내었다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.239-242
• /
• 2009

구조물의 표면에 부착된 압전소자(이하 PZT)의 전기역학적 어드미턴스(Electro-mechanical admittance)는 PZT와 구조물의 상호작용에 의해 발생하는 PZT의 압전효과와 유전성(dielectric)이 결합되어 발생되는 신호이다. 고주파수 대역에서 PZT의 전기역학적 어드미턴스는 구조물의 국부손상에 민감하게 반응하는 것으로 알려져 있다. 실험에서 측정된 PZT의 전기역학적 어드미턴스 분석에 널리 쓰이는 Liang 모델은 구조물을 단자유도계로 단순화하여 구조물의 동적특성이 전기역학적 어드미턴스에 미치는 영향을 정확하게 나타내기 어렵다. 유한요소법을 통해 PZT와 구조물의 상호작용을 해석하면 이러한 문제점을 해결할 수 있다. 그러나 고주파 대역에서 정확한 해석을 위해서는 유한요소망을 조밀하게 구성해야 하므로 많은 계산비용이 수반된다. 이 연구에서는 유한요소법과 비교하여 월등히 적은 계산비용으로 고주파 대역의 동적 응답을 매우 정확하게 모사할 수 있는 스펙트럼 요소법(Spectral Element Method ; 이하 SEM)을 통해 판구조물에 부착된 PZT의 전기-역학적 어드미턴스를 해석한다. 수치 예제 및 실험 예제를 통하여 내민보에 부착된 PZT에서 발생하는 전기-역학적 어드미턴스를 취득하고 이를 SEM해석 결과와 비교한다.

• Journal of Broadcast Engineering
• /
• v.7 no.4
• /
• pp.310-316
• /
• 2002

In this paper, we propose an adaptive search range decision algorithm for fast motion estimation of video coding. Block matching algorithm for motion vector estimation that improves coding efficiency by reduction of temporal redundancy has trade-off problem between the motion vector accuracy and the complexity. The proposed algorithm playing as a pre-processing of fast motion estimation adaptively determines the motion search range by the local statistics of neighboring motion vectors. resulting in dramatic reduction of the computational cost without the loss of coding efficiency. Experimental results show the capability of the proposed algorithm.

• Fire Science and Engineering
• /
• v.24 no.4
• /
• pp.104-108
• /
• 2010

This paper describes electrical fire on electric pad using carbon type hot wires. A carbon type hot wires electric pad is virtually impossible to connect hot wire as a method of electrical welding or soldering. In order to connect between hot wires, that has to splice carbon type material connector. If junction of hot wires was occurrence of poor connection on electric pad, it increase contact resistance on this junction point. With increasing contact resistance, junction of hot wires on electric pad generates local heating and finally leads to electrical fire. In this paper, we analyzed shape of damage in hot wires caused by electrical local heating and investigated fire cause on electric pad using by carbon type hot wires.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.6
• /
• pp.731-738
• /
• 2017

Twin-hulls frequently incur structural damage at connecting members between the hull and deck induced by pitching motions during voyages. so, reasonable reinforcement is necessary around vulnerable spots such as corner knuckle, the chine bottom and inner hull. Since guidelines for structural design are not clear, engineers often respond by reinforcing plate thickness, changing stiffener sizes and reducing frame spacing, etc. These members constitute about 85 % of the longitudinal dimensions of the ship, so it is necessary to locally reinforce certain points to minimize weight stress, and also solve construction cost problems while securing the freeboard margin. Therefore, we developed a new program by analyzing the structural design procedures for the twin car-ferries based on Korean Register of Shipping (KR) High Speed Craft Rules, identifying items that need to be added. In order to ensure the reliability of buckling estimations for procedures and design programs, we conducted a comparative study with other standards and confirmed that differences were minimal.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.4
• /
• pp.351-359
• /
• 2011

In a structure, damage can occur at several scales from micro-cracking to corrosion or loose bolts. This makes the identification of damage difficult with one mode of sensing. Hence, a multi-mode actuated sensing system is proposed based on a self-sensing circuit using a piezoelectric sensor. In the self sensing-based multi-mode actuated sensing, one mode provides a wide frequency-band structural response from the self-sensed impedance measurement and the other mode provides a specific frequency-induced structural wavelet response from the self-sensed guided wave measurement. In this study, an experimental study on the pipeline system is carried out to verify the effectiveness and the robustness of the proposed structural health monitoring approach. Different types of structural damage are artificially inflicted on the pipeline system. To classify the multiple types of structural damage, a supervised learning-based statistical pattern recognition is implemented by composing a two-dimensional space using the damage indices extracted from the impedance and guided wave features. For more systematic damage classification, several control parameters to determine an optimal decision boundary for the supervised learning-based pattern recognition are optimized. Finally, further research issues will be discussed for real-world implementation of the proposed approach.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.4A
• /
• pp.517-528
• /
• 2008

This paper presents a hysteretic damage model for reinforced concrete (RC) joints that explicitly accounts for the bond-slip between the reinforcing bars and the surrounding concrete. A frame element whose displacement fields for the concrete and the reinforcing bars are different to permit slip is developed. From the fiber section concept, compatibility equations for concrete, rebar, and bond are defined. Modification of the hysteretic stress-strain curve of steel is conducted for partial unloading and reloading conditions. Local bond stress-slip relations for monotonic loads are updated at each slip reversal according to the damage factor. The numerical applications of the reinforcing bar embedded in the confined concrete block, the RC column anchored in the foundation, and the RC beam-column subassemblage validate the model accuracy and show how including the effects of bond-slip leads to a good assessment of the amount of energy dissipation during loading histories.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.3
• /
• pp.134-141
• /
• 2011

There have been increased economic and societal demands to continuously monitor the integrity and long-term deterioration of civil infrastructures to ensure their safety and adequate performance throughout their life span. However, it is very difficult to continuously monitor the structural condition of the pipeline structures because those are placed underground and connected each other complexly, although pipeline structures are core underground infrastructures which transport primary sources. Moreover, damage can occur at several scales from micro-cracking to buckling or loose bolts in the pipeline structures. In this study, guided wave measurement can be achieved with a self-sensing circuit using a piezoelectric active sensor. In this self sensing system, a specific frequency-induced structural wavelet response is obtained from the self-sensed guided wave measurement. To classify the multiple types of structural damage, supervised learning-based statistical pattern recognition was implemented using the damage indices extracted from the guided wave features. Different types of structural damage artificially inflicted on a pipeline system were investigated to verify the effectiveness of the proposed SHM approach.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.7
• /
• pp.16-24
• /
• 2019

The corrosion amounts of steel structures can be different depending on their installation condition and height. Thus, their corrosion maintenance should be considered depending on installation conditions of local structural members. In this study, an atmospheric exposure test was conducted to evaluate the corrosion amount and the corrosion rate depending on the installation condition and height of a steel water gate using monitoring steel plates and corrosion environment measuring sensors. The mean corrosion depth was evaluated using the weight loss method and the galvanic corrosion current was measured by corrosion environment measuring sensors. Local corrosion rate of local structural member in steel water gate was estimated using measured mean corrosion depths and galvanic corrosion currents. From this measurement results, the corrosion damage in horizontal member of the cross beam was highly evaluated than those of other structural member as skin plate, etc. The relative difference in the corrosion rate of a local structural member could be highly affected by local corrosion environments of steel water gate members. Therefore, an appropriate maintenance method should be considered for local corrosion damages of local structural members determined by local corrosion environments of a steel water gate.