• Journal of Korean Society of Transportation
• /
• v.26 no.6
• /
• pp.7-15
• /
• 2008

Due to the limitations in the statistical data, the existing studies adopted rough methodologies with strong assumptions in the estimation of international passenger travel demand forecast in the ASEAN region. This study aims to develop international passenger travel demand models using scientific methodologies. This study proposes a direct demand model using the immigration and emigration data between countries in the region. This is because of the difficulty of estimating trip generation and trip distribution separately due to the data limitation in the region. As there does not exist the mode choice model for the region, this study estimates a mode choice model using the Stated Preference technique. The mode choice model is separated into three categories of models according to the range of distance between the origin and destination of travel; this is to reflect the different behavior in mode choice according to the travel distance. The result of model estimations suggests that the estimated models produce resonable results statistically. It is expected that the proposed models are useful for the future travel demand estimation in the ASEAN region.

• Journal of Korean Society of Transportation
• /
• v.28 no.5
• /
• pp.131-139
• /
• 2010

The transport mode choice problem is to determine which of the alternative transport modes connecting an origin and destination will be used by a traveler. Most of the research relating to transport mode choice have mainly been focused on modeling, properties, and applications of the model, but rarely were concerned with equilibrium among the modes. This paper proves the equilibrium among the modes by using a logit mode choice model, and then verifies it with the Korean Transport Database (KTDB). In order to obtain such an equilibrium, this paper also presents a solution algorithm based on the fixed point theorem. The algorithm was tested with an example and confirmed the equilibrium solution.

• 한국공간정보시스템학회:학술대회논문집
• /
• 1999.06a
• /
• pp.181-189
• /
• 1999

21세기 무한경쟁시대에서 국가경쟁력을 확보하기 위하여 현재 도로교통상황을 추정하고, 화물차의 공차(空車)를 줄이고, 차량운행상태를 관리할 필요성이 부각되었다. 본 연구에서는 실시간 교통정보산출 및 활용을 위하여 국가수치기본도에 GPS을 응용하는 기법을 제시하였다. 구체적으로는 GIS기능 중 하나인 공간결합(Spatial Join)기능을 활용하여 Map Matching, 통행시간추정 및 차량운행 관리기법 등을 제시하였다. 최종적으로는 제시된 기법을 서울시 강남구 지역일대에 시범적으로 적용시켜 보았다.

• Proceedings of the KOR-KST Conference
• /
• 2001.02a
• /
• pp.3-29
• /
• 2001

본 연구에서는 기존의 대중교통 통행배정모형이 고려하지 않거나 미흡하게 반영하였던 차량과 노선의 용량제약을 고려한 모형의 구축을 시도하였다. 일반적으로 대중교통 통행배정에서 수요와 공급의 관계는 수요가 증가하는 것과 무관하다고 받아들여지고 있으나 용량 초과는 통행자들의 경로선택 및 수단선택에 영향을 끼친다고 볼 수 있다. 이러한 용량초과에 의한 혼잡을 반영하기 위해 용량제약식을 포함한 모형을 개발하고 실용운행회수라는 개념을 도입하였다. 또한 기존에 제시된 용량제약을 고려한 모형들이 실제적인 현상을 정확히 모사하는 데에는 한계가 있을 뿐 만 아니라 현실과 다소 거리가 있는 가정이 내재되어 있는 반면 본 연구에서는 가능한 한 최대로 현실 여건을 반영하는 모형을 정립하였다. 본 연구에서 제시한 모형은 동일한 기종점 사이를 운행하는 경쟁노선이 많은 대도시에서 통근·통학을 위한 통행자들이 많은 오전, 오후 첨두시 대중교통 수요를 분석하여 대중교통의 운행관리체계 개선 및 투자계획, 서비스 개선을 위한 수요예측을 하는데 유용하게 사용할 수 있을 것으로 사료된다. 그리고 기존의 대중교통 통행배정의 결과가 현재나 장래의 잠재적인 수요(demand)를 예측하는 방법인데 반하여 본 연구에서 정립된 모형은 주어진 네트워크에서 실제로 통행하고 있는 수요(flow)를 예측함으로써 교통 계획가나 대중교통 운영자의 계획 및 운영정책수립에 합리적인 도움을 줄 수 있다. 또한 현재의 대중교통 시스템 하에서의 통행배정 뿐만 아니라 다른 형태의 용량과 운행특성을 가진 교통 수단이나 노선이 도입되었을 때 공급이 제한적인 경우의 수요 예측에 적합한 모형을 개발하였다.에 대한 규제가 초국가적 차원으로 발전되는 계기를 제공하고 있다. 향후, 담배규제협약안의 세부사안들에 대한 합의과정에서 각 국별로 상당한 이견과 반발이 예상되고 있지만, 협약안의 전체 회원국 투표에서 승인될 경우 각 국가들뿐만 아니라 담배산업과 담배기업들에게 미치는 파급효과가 매우 클 것으로 예상된다. 대부분의 국제협약들이 그러하듯이, 담배규제협약도 그 적용 범위와 수준이 어느 정도로 결정되는지에 따라 각 국가와 기업별 이해관계가 크게 달라지게 되기 때문에 신중한 대응전략이 요구된다고 하겠다.의 화물전용차선의 설치시는 수답렬 교통량의 구성비와 구간 평균교통량에 의하여 그 효과가 다르게 나타남을 알 수 있었다. 따라서 물류비용 절감차원에서의 화물전용차선의 설치는 본 연구에서 나타낸 방법과 같이 수단간의 경제적 편익을 고려한 구간별 시간대별 효과분석을 통하여 정책의 시행여부가 결정되어야 할 것이다. 한편, 화물전용차선의 설치로 인한 물류비용의 절감을 보다 효과적으로 달성하기 위해서는 종합류류 전산망의 시급한 구축과 함께 화물차의 적재율을 높이고 공차율을 낮출 수 있는 운송체계의 수립이 필요한 것으로 판단된다. 그라나 이러한 화물전용차선의 효과는 단기적인 치유책일 수밖에 없기 때문에 물류유통 시설의 확충을 위한 사회간접자본의 구축을 서둘러 시행하여야 할 것이다.으로 처리한 Machine oil, Phenthoate EC 및 Trichlorfon WP는 비교적 약효가 낮았다.>$^{\circ}$E/$\leq$30$^{\circ}$NW 단열군이 연구지역 내에서 지하수 유동성이 가장 높은 단열군

• Journal of Korean Society of Transportation
• /
• v.26 no.3
• /
• pp.17-29
• /
• 2008

A volume-delay function(VDF) has been used to describe the relation between traffic volumes and delay experienced by travelers on the roads traveling from origin to destination, which has been usually adopted in traffic assignment. For the purpose of more precise description of traffic pattern, we have to estimate the parameters of VDF in advance. This paper presents a methodology for estimating the parameters, which combined with golden section method. By using the method we have estimated the parameters with real data based on KTDB(2006), and validated them. Compared to the existing values of the parameters, newly estimated values are found to be closer to real world.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.5
• /
• pp.159-169
• /
• 2008

The aim of this paper is to research the changes of social welfare by internalizing external cost, especially the maintenance cost. Main target of this paper is the Cheonan$\sim$Nonsan Line, where private capital highway, national highway and local road are competing against each other. Considering the realistic difficulties in applying the First Best pricing, this paper applied the Second Best pricing, applying the maintenance cost, in lieu of the already mentioned. The demand functions of the toll roads were built through regression analysis. By reflecting the maintenance cost to the toll fee, It was able to confirm the variation of social welfare deriving from the traffic assign change but also the aspects of toll revenue at the same time. Result of applying the Second Best pricing shows merely a small change in social welfare. However, in the aspect of finance, it is analyzed that there will be about 13 billion won worth of financial effectiveness which will contribute to the reduction of the national financial support.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.6
• /
• pp.907-916
• /
• 2018

This study presents a methodology that can integrate the information generated by the Busan taxi DTGs and Tachometers. Utilizing the results by the methodology, travel patterns of taxi users were analyzed. Also to verify the reliability of the methodology was conducted by comparing its results with those of O-D information of the National Transportation DB (KTDB). Despite the limited number of samples. the results of this study showed that DTG data, which can reflect changes in status and conditions in real time, can be used as a replacement for KTDB. It is expected that the results generated by the suggested methodology can be useful for developing and executing desirable taxi related policies.

• Journal of Korean Society of Transportation
• /
• v.29 no.1
• /
• pp.17-27
• /
• 2011

This paper investigates some critical errors influencing travel demand estimation in Korea Transportation Data Base (KTDB), and through this investigation reasonable traffic analysis zone (TAZ) size and internal trips ratio are analyzed. With varying zone size, the accuracy of travel demand estimation is studied and appropriate level of zone size in KTDB is also presented. For this purpose zonal structure consisting of location of zone centroid, number of centroid connecters has been constructed by social economic index, and then some descriptive statistical analyses such as F-test, coefficient of correlation are performed. From the results, this paper shows that the optimum levels of zone system were various according to the order and capacity of roads, and also shows that the smaller TAZ, the less error in this research. In conclusion, in order to improve accuracy of traffic demand estimation it is necessary to make zone size smaller.

• Journal of Korean Society of Transportation
• /
• v.32 no.4
• /
• pp.347-356
• /
• 2014

Passenger cars occupy about 74% among registered vehicles in Korea and the ratio of transportation mode sharing is approximately 60% in the passenger transport part. However, there is no statistics related to travel characteristics of passenger cars, and official statistics are estimated from O/D travel data. Thus, National Transportation DataBase Center in KOTI has attempted to construct various statistical data through Korea Vehicle Use Survey. Based on these data, Analysis of Variance (ANOVA) was conducted to investigate the differences in travel characteristics of each analysis group. As a result, all of the explanatory variables(weekday vs. weekend, metropolitan area vs. non-metropolitan area, male vs. female, commute time vs. other time, routine purpose vs. non-routine purpose) were found to be different across households. In addition, travel distances per trip of weekday, metropolitan area, male, commute time, and non-routine purpose are longer than the opposite variables. Also, the trip distances of small size(1 to 2 persons) households are shorter compared to large size(more than 5 persons) households.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.1
• /
• pp.1-14
• /
• 2014

The expansion of the physical road in response to changes in social conditions and policy of the country has reached the limit. In order to alleviate congestion on the existing road to reconsider the effectiveness of this method should be asking. Currently, how to collect traffic information for management of the intersection is limited to point detection systems. Intelligent Transport Systems (ITS) was the traffic information collection system of point detection method such as through video and loop detector in the past. However, intelligent transportation systems of the next generation(C-ITS) has evolved rapidly in real time interval detection system of collecting various systems between the pedestrian, road, and car. Therefore, this study is designed to evaluate the development of an algorithm for queue length based real-time traffic signal control methodology. Four coordinates estimate on time-space diagram using the travel time each individual vehicle collected via the interval detector. Using the coordinate value estimated during the cycle for estimating the velocity of the shock wave the queue is created. Using the queue length is estimated, and determine the signal timing the total queue length is minimized at intersection. Therefore, in this study, it was confirmed that the calculation of the signal timing of the intersection queue is minimized.