• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.3
• /
• pp.388-402
• /
• 2000

The radiation characteristics of leaky antenna from the dielectric-coated conducting cylinder with periodic corrugation are investigated theoretically for the infinite and finite periodic structures. For the infinite periodic structure, mode-matching method is applied. The integral equation is derived for the finite periodic structure by use of the Fourier transform and mode expansion and a simultaneous linear equation is obtained. The influences of the corrugation slot width, corrugation depth, dielectric thickness, cylinder radius, and finite corrugation number on the radiation characteristics (leakage constant, phase constant, and radiation pattern) are investigated. The results of the finite periodic corrugations are compared with those of the infinite extent structure and good agreement is found. To reduce high side lobe levels of the uniform finite periodic structure, tapering process on the beginning and end section of antenna and nonuniform quasi-period slot arrays are considered. Especially, for the corrugation period, width and depth used for a corrugated surface wave antenna, through the proper tapering process, end-fire radiation pattern with reduced side lobe levels is given.

• The Korean Journal of Rheology
• /
• v.5 no.2
• /
• pp.125-135
• /
• 1993

고밀도 폴리에틸렌(High density polyethlene, HDPE)내에 차단성 수지인 나일론 (Nylon)이 분산된 블렌드의 모폴로지와 유기 용제에 대한 차단성에 대해 연구하였다. 나일 론이 구형, 실린더 및 판상 구조 형태를 가지며 분산된 블렌드를 가공조건을 변화시켜 제조 하였다. 블렌드의 모폴로지가 유기 용제의 차단성에 끼치는 영향을 알아보기 위하여 투과시 험을 하였으며 수치 모사를 통하여 투과도를 이론적으로 예측해 보았다. 동일한 나일론양에 서 분산상인 나일론이 구형 또는 실린더 형태를 갖는 경우 투과액에 대해 낮은 차단성을 보 이는데 반하여 판상구조를 갖게되는 경우에는 차단성이 크게 상승함을 관찰할수 있었다. 이 는 판상구조형태를 취함으로써 블렌드내에서의 투과액의 투과경로가 길어졌기 때문이다. 나 일론 층의 여러기하학적인 형태변화에 대해 GRM관계식 및 이를 수정한 식을 이용하여 투 과도를 예측하여 보았다. 나일론층의 중첩도가 높다고 가정한 경우가 중첩도를 낮게 생각한 경우에 비해 높은 차단성을 보임을 수정된 GRM 관계식을 통하여 알 수 있었다. 또한 나일 론 층의 폭이 증가할수록 그리고 두께가 감소할수록 높은 차단효과를 보임을 예측 할 수 있 었다.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.6
• /
• pp.751-759
• /
• 2008

In this study, the effect of an unsteady flow field around a body of aerostatic/aerodynamic forces were investigated using rectangular cylinders (B/D = 2, 3, 4, 5). Proper orthogonal decomposition (POD) was introduced to the analysis of the fluctuating pressure field that was measured on the stationary/oscillatory B/D=4 rectangular cylinder, and the characteristics of the proper functions with flow patterns were identified. In addition, the physical decoupling and interactions in the different co-existing flow patterns were investigated through POD. The comparison with the identified proper function associated with a particular flow pattern revealed that the Karman vortex is almost not affected by the separation bubble, but that the Karman vortex considerably interferes in the development of the separation bubble around the trailing edge. It can be considered that the Karman vortex induces the increment of the curvature of the substantial separated flow.

• The Korean Journal of Rheology
• /
• v.9 no.1
• /
• pp.6-15
• /
• 1997

계면활성제용액에 서로 다른 기능을 하는 두 종류의 첨가제를 투입하여 미셀의 미 세구조 전이현상을 규명하였다. 양이온 계면활성제는 CMC 이상의 농도에서 2단계의 미세 구조 전이거동을 나타낸다. 우선 구형 미셀은 첨가제의 투입에 의하여 표면에서의 친수성기 간의 반발력이 감소됨으로써 실린더형 또는 디스크형미셀로 전이가 일어난다. 더욱 농도가 증가하면 이방성을 가지는 실린더형 미셀간의 중첩 또는 hooking 현상에 의한 두 번째 전 이가 일어난다. 이때 미셀 용액은 흔히 점탄성을 나타내거나 확연한 비뉴톤성 유체거동을 나타낸다. 본 연구에선 heptanol의 화확구조적 차이가 물성에 나타내는효과를 규명하고 wormlike 미셀을 형성하는 MaSal에 의한 점탄성 거동을 살펴보았다. Heptanol의 화학구조 의 영향을 보면 약친수성기인 OH기가 알킬그룹과 나란하게 존재하여 밀집된 구조를 가지 기 쉬운 primary heptanol이 가장효과적으로 미세구조 전이를 유도함을 관찰하였다. 다른 이성질 hetanol의 경우 secondary heptanol이 teriary heptanol에 비하여 효과적임을 보이지 만 화학재할수 있는 농도범위가 매우 좁아 대부분 영역에서 비뉴톤성거동을 나타냄을 확인 하였다. 즉 NaSal를 사용한 경우 실린더형 미셀이 존재할 수 있는농도범위가 매우 좁아 대 부분 영역에서 비뉴톤성 거동을 나타냄을 확인하였다. 즉 NaSal 이 첨가된 용액은 선형점탄 성거동을 보이며 몰비가 증가함에 따라 scission 과정이 관찰되었다. 또한 몰농도비에 따라 항복응력과 shear thickening 특징을 보이는데 이는 흐름장의 세기에 따라 미세구조 변화가 일어나기 때문이다.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.2
• /
• pp.427-435
• /
• 2017

Most of the domestic city buses are equipped with the pressure vessels subjected to internal pressure applied by compressed natural gas. Pressure vessels subjected to internal pressure are used in various forms and purposes. Fuel is explosive and has flammable high pressure. The damage of the pressure vessel causes many property damage and loss of life. Safe design for pressure vessel is always necessary. Due to these reasons, many studies using finite element analysis have been conducted. In this paper, the stresses of cylindrical vessel and spherical dome were analyzed using ANSYS, a finite element analysis software. In order to verify the validity of the analysis, a model with a perfectly spherical shape of the dome was designed and observed. Based on the ASME standard in used, stress distribution was also analyzed for models designed with compressed natural gas(CNG). The FEM analysis software agreed with the theory when the dome shape was perfectly spherical. The model designed based on the ASME specification theory, stress concentration occurred in the knuckle part.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.2
• /
• pp.180-186
• /
• 1999

Conformal methods such as staircase approximation and effective medium theory have been used to model arbitrary dielectric surfaces in Cartesian FDTD(finite-difference time-domain) grids. However, the staircase approximation doesn't guarantee accurate results and the effective medium theory cannot be applied for frequency dispersive medium. In this paper, a simple conformal method is introduced for analyzing arbitrary dielectric surfaces. These arbitrarily shaped dielectric surfaces make nonuniformly filled FDTD cells. E(H)-field in a nonuniformly filled FDTD cell is calculated by considering the cell as the combination of two kinds of uniformly filled cells whose material boundaries are normal and parallel to the E(H)-field in the cell. TM scattering from a rotated 2-D dielectric and a ferrite square cylinder is analyzed to show the accuracy of the proposed method.

• Applied Chemistry for Engineering
• /
• v.32 no.6
• /
• pp.679-683
• /
• 2021

Lecithin, a zwitterionic phospholipid, forms spherical reverse micelles in nonpolar organic solvents such as decane. The addition of monovalent ions like lithium chloride (LiCl) to lecithin organosols induces the transformation of organosols into organogels due to the entanglement of reverse cylindrical micelles. In this study, we investigate the effect of pentanol acting as co-surfactant on rheological properties of lecithin/LiCl mixtures. From rheological studies, we find that the viscosity and elastic property of organogels decreased upon the addition of pentanol to organogels. The decrease in viscosity and elastic property can be attributed to the shortening of reverse cylindrical micelles confirmed by small angle X-ray scattering (SAXS).

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.5
• /
• pp.567-573
• /
• 2010

In this study, we evaluated the structural integrity and weight of a rocket motor with a torispherical dome by size optimization. Size optimization was achieved by first-order and sub-problem methods, using the Ansys Parametric Design Language (APDL). For rapid design verification, a modified 2D axisymmetric finite-element model was used, and the bolt pre-tension load was expressed as function of the ratio of the cross-sectional area. The thickness of the dome and the cylindrical part of the rocket motor were selected as the design parameters. Our results showed that the weight and structural integrity of the rocket motor at the initial design stage could be determined more rapidly and accurately with the modified 2D axisymmetric finite-element model than with the 3D finite-element model; further, the weight of the rocket motor could be saved to maximum of 17.6% within safety limit.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.05a
• /
• pp.679-682
• /
• 2003

카타디옵트릭 카메라는 거울을 이용하여 $360^{\circ}$의 3차원 이미지를 한 장에 촬영할 수 있는 이미지 시스템이다. 본 논문에서는 이 시스템을 사용할 때에 발생하는 이미지 왜곡 문제를 해결하는 구형투영 알고리즘을 제안한다. 흔히 사용하는 실린더형 알고리즘의 경우 계산은 비교적 간단하지만, 거울의 바로 아래에 있는 물체의 경우 전체적인 영상을 볼 수 없다는 단점이 있다. 본 연구에서 사용한 카메라는 포물면 거울을 사용한 카타디옵트릭 카메라이며, 쌍곡면거울을 사용한 카메라에 대해서도 이론적으로 공식을 유도하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.2
• /
• pp.181-186
• /
• 2009

The objective of this study is ensuring safety of cabin when the blade impacts into a obstacle by verifying safety of the rotor mast and the transmission using impact loads calculated from the simulation. The rotor mast shall not fail and the transmission shall not be displaced into occupiable space when the main rotor composite blade impact into a 8 inch rigid cylinder in diameter on the outer 10% of the blade at operational rotor speed. To calculate the reaction loads at the spherical bearing and lead-lag damper, blade impact analysis was performed with FE model consist of composite blade, tree(or rigid cylinder) using elastic-plastic with damage material and several contact surfaces which were created to describe a progress of actual failure. Also, the reaction loads were investigated in change of blade rotation speed and pitch angle.