• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.8
• /
• pp.1172-1179
• /
• 2022

This paper describes a design of point scalar multiplier for public-key cryptography based on binary Edwards curves (BEdC). For efficient implementation of point addition (PA) and point doubling (PD) on BEdC, projective coordinate was adopted for finite field arithmetic, and computational performance was improved because only one inversion was involved in point scalar multiplication (PSM). By applying optimizations to hardware design, the storage and arithmetic steps for finite field arithmetic in PA and PD were reduced by approximately 40%. We designed two types of point scalar multipliers for BEdC, Type-I uses one 257-b×257-b binary multiplier and Type-II uses eight 32-b×32-b binary multipliers. Type-II design uses 65% less LUTs compared to Type-I, but it was evaluated that it took about 3.5 times the PSM computation time when operating with 240 MHz. Therefore, the BEdC crypto core of Type-I is suitable for applications requiring high-performance, and Type-II structure is suitable for applications with limited resources.

• Journal of Appropriate Technology
• /
• v.6 no.2
• /
• pp.126-135
• /
• 2020

Recently, with the development of the 4th Industrial Revolution era and the popularization of technologies the maker movement is spreading worldwide in various ways for education, entrepreneurship, and solving social problems. This paper introduces a case of establishing and operating a maker space in Tanzania, East Africa, one of the developing countries. iTEC Tech-shop was established in the first half of 2018 at the Nelson Mandela African Institution of Science and Technology (NM-AIST) in Arusha, Tanzania by Innovative Technology and Energy Center (iTEC), and has been operating for nearly two years. With the allocation of empty warehouse space from NM-AIST, physical facilities were established through the purchase and installation of equipment and hand tools. Based on the advice from Idea Factory of Seoul National University and Fab-Lab Seoul, iTEC Tech-shop operational system were established. Through a total of 7 technical workshops, iTEC Tech-shop provided training courses for about 180 local personnel. In addition, the smart Techshop test-bed project was promoted in order to improve the operation level along with securing sustainability of the Techshop. The case of the iTEC Tech-shop could be a useful case for institutions or organizations promoting the maker movement to developing countries.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.8
• /
• pp.513-523
• /
• 2020

This study has derived the patents of the technology that have been filed and registered so far to investigate the trends of virtual reality(VR) experience contents technology, and analyzed them focusing on core patent technologies. The patents of Korea, USA, Japan, Europe and PCT, which were released until June 2020, were targeted, and patent search was conducted using WISDOMAIN search DB. The keywords for patent search were related to experience technology using VR, and a total of 1,013 data were obtained after creating a search formula by combining the derived keywords. Among them, a total of 65 data were extracted from the result of selecting valid patents, and a political analysis was conducted on them. Looking at the overall application trend, most of Korean patent applications accounted for, and noise patents are system-related devices to implement VR technology. The United States and Europe are focused on developing augmented reality(AR) technology, the study found. The technology of VR experience has increased rapidly since 2017, and the technology growth stage is the period from the beginning to the growth stage. As a result of examining the valid patents related to VR experience, technology was searched in various fields such as rural tour, exhibition, education, and performance, and patents for contents writing and general virtual experience related technology were also searched. If we predict the possibility of development of VR industry in the future, it is necessary to respond to preemption of intellectual property rights by proceeding technology development and patent application for more diverse fields.

• Korean Journal of Clinical Laboratory Science
• /
• v.54 no.2
• /
• pp.79-94
• /
• 2022

Due to the highly contagious nature and severity of the respiratory diseases caused by COVID-19, economical and accurate tests are required to better monitor and prevent the spread of this contagion. As the structural and molecular properties of SARS-CoV-2 were being revealed during the early stage of the COVID-19 pandemic, many manufacturers of COVID-19 diagnostic kits actively invested in the design, development, validation, verification, and implementation of diagnostic tests. Currently, diagnostic tests for SARS-CoV-2 are the most widely used and validated techniques for rapid antigen, and immuno-serological assays for specific IgG and IgM antibody tests and molecular diagnostic tests. Molecular diagnostic assays are the gold standard for direct detection of viral RNA in individuals suspected to be infected with SARS-CoV-2. Antibody-based serological tests are indirect tests applied to determine COVID-19 prevalence in the community and identify individuals who have obtained immunity. In the future, it is necessary to explore technical problems encountered in the early stages of global or regional outbreaks of pandemics and provide future directions for better diagnostic tests. This article evaluates the commercially available and FDA-approved molecular and immunological diagnostic assays and analyzes their performance characteristics.

• Journal of the Korean Society of Radiology
• /
• v.16 no.6
• /
• pp.799-805
• /
• 2022

Radiation therapy of human tissues, including bone tissue, is accompanied by side effects on normal tissues. It has a more lethal effect on stem cells, which play an essential role in tissue regeneration, including the basal cells constituting the tissue. In this study, the mouse parietal model, which implemented an artificial osteoradionecrosis model on the parietal region of the mouse, was artificially defected and then the bone regeneration was tested. In order to overcome the implemented osteoradionecrosis, a fibrin scaffold, widely used as a biomaterial, and stromal cell-derived factor-1 (SDF-1), which is used as a long-term treatment for damaged, were mixed to verify the osteoradionecrosis regeneration effect on the parietal of mouse. In order to expect a synergistic effect in the fibrin scaffolds, a fibrin scaffolds was prepared after maintaining the concentration of SDF-1 (1 ㎍/ml) in the fibrinogen solution. In this study, after artificially creating a osteoradionecrosis model in the parietal region of mouse, fibrin scaffolds were incorporated to analyze the effect of bone regeneration within 4 weeks, the initial stage of bone regeneration. In conclusion, the combined use of these two substances did not show a dramatic regenerative effect in inducing the regeneration of osteoradionecrosis in the parietal region of mouse. However, positive results were obtained that can be maintain the bone regeneration effect environment at the initial stage. Therefore, the combined use of the fibrin scaffold and SDF-1 is considered to be a suitable candidate for the effect of overcoming osteoradionecrosis.

• Korean journal of applied entomology
• /
• v.61 no.1
• /
• pp.101-108
• /
• 2022

Because of their specificity to target insects and relatively low toxicity to non-target organisms, insect growth regulators (IGRs) have been regarded as attractive alternatives to chemical insecticides. Commercially available IGRs are classified into juvenile hormone agonists (JHAs), ecdysone agonists (EAs), and chitin synthesis inhibitors (CSIs) according to their mode of action. Recently, JH-mediated interaction of methoprene-tolerant (Met), which is JH receptor, and its binding partners have been replicated in vitro using yeast cells transformed with the Met and FISC/CYC genes of A. aegypti. Using this in vitro yeast two-hybrid β-galactosidase assay, juvenile hormone antagonists (JHANs) have been identified from various sources including chemical libraries, plants, and microorganisms. As juvenile hormone (JH) is an insect specific hormone and regulates development, reproduction, diapause and other physiological processes, JHANs fatally disrupt the endocrine signals, which result in abnormal development and larval death. These results suggested that JHANs could be efficiently applied as IGR insecticides with a broad insecticidal spectrum. This review discuses JH signaling pathway mediated by Met and future prospects of JHANs as environmentally benign IGR insecticides.

• Journal of Software Assessment and Valuation
• /
• v.16 no.1
• /
• pp.65-79
• /
• 2020

As Programmable Logic Controllers (PLCs), popular components in industrial control systems (ICS), are incorporated with the technologies such as micro-controllers, real-time operating systems, and communication capabilities. As the latest PLCs have been connected to the Internet, they are becoming a main target of cyber threats. This paper proposes two sanitizers that improve the security of uC/OS-II based firmware for a PLC. That is, we devise BU sanitizer for detecting out-of-bounds accesses to buffers and UaF sanitizer for fixing use-after-free bugs in the firmware. They can sanitize the binary firmware image generated in a desktop PC before downloading it to the PLC. The BU sanitizer can also detect the violation of control flow integrity using both call graph and symbols of functions in the firmware image. We have implemented the proposed two sanitizers as a prototype system on a PLC running uC/OS-II and demonstrated the effectiveness of them by performing experiments as well as comparing them with the existing sanitizers. These findings can be used to detect and mitigate unintended vulnerabilities during the firmware development phase.

• Journal of Software Assessment and Valuation
• /
• v.17 no.2
• /
• pp.11-17
• /
• 2021

In this study, problems of software completeness appraisal are pointed out and their solutions are presented by analyzing appraisal cases and judicial precedents. Completeness appraisal, ready-made appraisal, defect appraisal, and cost appraisal have been classified as and have been evaluated with extant software completeness appraisals. From a legal point of view, and in judicial precedents, however, there is a big difference between the definition of completeness and the completion rate. This is because the degree of completeness is evaluated under the premise that the software's development is complete, whereas the ready-made appraisal inspects the development progress of unfinished software. Often, in cases involving software completion rate, the total completion level is calculated by weighting each step of the software development process. However, completeness evaluations use the software's realization-operation as its sole criterion. In addition, another issue not addressed in existing software completeness appraisal cases is that there is no mention of who is responsible for software defects, whereas in case law, the responsible party is determined by finding who caused the dispute. In this paper, we systematically classify these problems, and present a novel evaluation method that separates software completeness evaluations from software completion evaluations.

• Clean Technology
• /
• v.28 no.3
• /
• pp.227-231
• /
• 2022

The demand for high-voltage power devices is rising in various industries, but especially in the transportation industry due to autonomous driving and electric vehicles. IGBT module parts of 3.3 kV or more are used in the power propulsion control device of electric vehicles, and the procurement of these parts for new construction and maintenance is increasing every year. In addition, research to optimize high-voltage IGBT parts is urgently required to overcome their very high technology entry barrier. For the development of high-voltage IGBT devices over 3.3 kV, the resistivity range setting of the wafer and the optimal conditions for major unit processes are important variables. Among the manufacturing processes to secure the optimal junction depth, the optimization of the diffusion process, which is one step of the unit process, was examined. In the diffusion process, the type of gas injected, the injection time, and the injection temperature are the main variables. In this study, the range of wafer resistance (Ω cm) was set for the development of high voltage IGBT devices through unit process simulation. Additionally, the well drive in (WDR) condition optimization of the diffusion process according to temperature was studied. The junction depth was 7.4 to7.5 ㎛ for a ring pattern width of 23.5 to25.87 ㎛, which can be optimized for supporting 3.3 kV high voltage power devices.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.971-978
• /
• 2022

As a marketing method in a non-face-to-face society, the purpose of this study is to test how AR experience affects purchase intention in the process of consumers recognizing product information to purchase products and to secure the basis for the effectiveness of developing and introducing augmented reality functions in future product brand applications. Literary research methods and empirical research methods were used to verify the research purpose, and to measure this, an application of domestic tableware brand 'Odense', which implements augmented reality functions, was produced and used as an experimental tool. Also, a direct causal relationship was attempted by constituting a questionnaire by deriving a measurement scale for perceived usefulness, perceived ease, perceived pleasure, and purchase, which are factors of technology acceptance theory (TAM), and empirical analysis was conducted using the SPSS 25.0 statistical package to achieve the purpose of the study. As a result of the study, significant results were derived from all factors in the effect of perceived usefulness, ease, and pleasure on purchase intention, and several significant differences were found among factors according to gender, age, and internet shopping usage time in general characteristics. In conclusion, the user experience of the medium in which the augmented reality function is introduced in the information recognition stage of the product has a positive effect on purchase compared to the user experience of existing applications.