• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.9
• /
• pp.158-164
• /
• 1999

In this paper a simple measurement technique for mechanical-acoustic transfer functions is proposed . The mechanical-acoustic transfer functions, generally , are measured through mechanical excitations ; impact hammers or shakers. Recently , by virtue of vibro-acoustical reciprocity principle, they are measured through acoustic excitations : loudspeakers. This kind of test needs to measure the volume velocity , the radiation characteristics of a sound source. Because the volume velocity of the sound source is changed by driving signal , it is difficult to measure it. However , the new method in this paper needs not to measure the volume velocity of a sound source by combination of mechanical and acoustic excitations. Moreover, this method has the methodological advantages, such as usage of a general loudspeaker for the reciprocal excitation, no sptatial limitations for measurements of mechanical-acoustic transfer functions.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.3
• /
• pp.52-58
• /
• 1998

본 논문에서는 시간 지연이 없는 서브밴드 필터 구조를 사용한 능동 소음 제어 시 스템을 제안하였다. 제안된 시스템은 기준 입력 신호와 2차 경로의 전달 함수를 컨볼루션하 여 만들어지는 filtered reference 신호가 서브밴드내에서 생성될 수 있도록, 2차 소음원과 오차 센서 사이의 전기·음향학적인 경로를 나타내는 2차 전달 함수를 각 서브밴드로 재구 성함으로써, 알고리듬 구현시 계산량을 감소시킨다. 또한 2차 경로의 전달함수가 시간에 따 라 변화하는 경우에도 능동 소음 제어 시스템의 소음 제어 성능을 유지할 수 있도록, 각 밴 드마다 두 개의 적응필터를 사용한 on-line 시스템 인지 구조를 제안하여 on-line 시스템 인 지에 필요한 계산량을 감소시켰다. 본 논문에서 제시한 능동 소음 제어 시스템의 제어 성능 과 on-line 시스템 인지 성능을 모의 실험을 통하여 검증하였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.6
• /
• pp.178-185
• /
• 2001

This paper describes the correlation between the interior noise and the trunk wall vibration. Using the vibro-acoustic reciprocity, effect of the trunk wall vibration on the compartment noise is investigated on a medium size car. In the low frequency range, vehicle interior noise is dominated by several acoustic modes of the passenger compartment and the vibration modes of the surrounding shell parts. Especially, vibration of the trunk wall radiates sound and it is transferred through holes on the package tray into the passenger compartment. This paper experimentally reveals that sound can be well produced at some particular vibration modes of the trunk lid and it strongly influences the compartment noise through package tray holes. Contributions of the trunk walls to the interior noise are estimated by measuring the acoustic-structural transfer function, based on the vibro-acoustical reciprocity theorem.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.8
• /
• pp.806-814
• /
• 2009

This paper reviews a study about sound reflection control using an active sound absorber. An active sound absorber includes sound transmitting and receiving piezocomposite sensor layers molded by water tight epoxy, and connected with a feedback controller. The multi-layer sensors and the controller consists a closed feedback loop, whose intrinsic characteristics shows excellent impedance matching performance within specified frequency band, and consequently, minimizes reflection waves. Multilayer sound transmission model is derived based on one dimensional model, and its performance is verified with experiment using a pulse tube setup.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.618-622
• /
• 2000

This paper describes the correlation between the interior noise and the trunk wall vibration. Using the vibro-acoustic reciprocity, effect of the trunk wall vibration on the compartment noise is investigated on a medium size car. In the low frequency range, vehicle interior noise is dominated by several acoustic modes of the passenger compartment and the vibration modes of the surrounding shell parts. Especially, vibration of the trunk wall radiates sound and it is transferred through holes on the package tray into the passenger compartment. This paper experimentally reveals that sound can be well produced at some particular vibration modes of the trunk lid and it strongly influences the compartment noise through package tray holes. Contributions of the trunk walls to the interior noise are estimated by measuring the acoustic-structural transfer function, based on the vibro-acoustical reciprocity theorem.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.04a
• /
• pp.108-109
• /
• 2014

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1997.06a
• /
• pp.1-4
• /
• 1997

스테레오 반향신호 제거기에 있어서 입력 스테레오 신호 사이에는 높은 상호상관을 가진다. 이러한 상호상관으로 인하여 스테레요 반향신호 제거기 구성시, 적응필터에서 분리된 전달함수를 정확하게 분리해낼 수 없게되고, 반향신호의 제거량이 충분하지 못하여 반향신호 제거기의 성능을 저하시키게된다. 본 연구에서는 기존의 선형 결합 구조를 이용한 적응 필터를 스테레요 반향신호 제거기에 응용하여 입력 스테레오 신호사이의 상호상관을 바꾸어 주게 되면, 반향신호의 제거량이 증가되는 것을 시뮬레이션을 통하여 확인하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.2
• /
• pp.108-116
• /
• 2015

An acoustic vector sensor is a device that is capable of measuring the direction of wave propagation and the acoustic pressure. In this paper, the modeling of micro-cantilever sensor for the vector sensor are proposed by consideration of acoustic phenomenon in water. Two models based on unimorph structure are proposed in this paper and corresponding transfer function which describes the relation between input pressure wave and output voltage depending on incidence angle and frequency of pressure wave is derived based on lumped model. It has been shown that very thin and flexible micro-cantilever can be used to measure directly the particle velocity component in water.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.1
• /
• pp.13-20
• /
• 2001

Adaptive digital filters with long impulse response such as acoustic echo canceller and active noise controller suffer from slow convergence and computational burden. Subband techniques and multirate signal processing have been recently developed to improve the problem of computational complexity and slow convergence in conventional adaptive filter. Any FIR transfer function can be realized as a serial connection of interpolators followed by subfilters with a sparse impulse response. In this case, each interpolator which is related to the column vector of Hadamard matrix has band-pass magnitude response characteristics shifted uniformly. Subband technique using Hadamard transform and decimation of subband signal to reduce sampling rate are adapted to system modeling and acoustic noise cancellation In this paper, delayless subband structure with nonuniform bandwidth has been proposed to improve the performance of the convergence speed without aliasing due to decimation, where input signal is split into subband one using tree-structured filter bank, and the subband signal is decimated by a decimator to reduce the sampling rate in each channel, then subfilter with sparse impulse response is transformed to full band adaptive filter coefficient using Hadamard transform. It is shown by computer simulations that the proposed method can be adapted to general adaptive filtering.

• 대한공업교육학회지
• /
• v.34 no.1
• /
• pp.238-251
• /
• 2009

The noise itself that affects the sensor array is defined as the noise which happens in the place where the system is installed and the circumference noise which comes from the ocean. The array structure for detecting acoustic signal in the underwater effected turbulent layer flow noise. In this paper to design the conformal array spectral density function was introduced and several cases of flow induced noise which affect transfer function were simulated. Modified Corcos wall pressure model was used as turbulent boundary layer flow noise. The effect of noise has been reduced as integrated sum of transfer function has been reduced by decreasing elastomer thickness and density when kx is in low wave number area. Also the characteristics of transfer function by Corcos wall pressure displayed the product of frequency density function. This simulation results can be applied to the conformal array design in unmmaned underwater vehicle in the near future.