• 건축구조
• /
• 제9권4호
• /
• pp.54-57
• /
• 2002

• Composites Research
• /
• 제35권2호
• /
• pp.106-114
• /
• 2022

Carbon fiber-reinforced plastic, well known high specific strength and high specific stiffness, have been widely used in the aircraft industry. Mostly the CFRP structure is fabricated by lamination of carbon fiber or carbon prepreg, which has major disadvantage called delamination. Delamination is usually produced due to absence of the through-thickness direction fiber. In this study, three-dimensional carbon preform woven in three directions is used for fabrication of aircraft wing unit structure, a part of repeated structure in aircraft wing. The unit structure include skin, stringer and rib were prepared by resin transfer molding method. After, the 3D structure was compared with laminate structure through compression test. The results show that 3D structure is not only effective to prevent delamination but improved the mechanical strength. Therefore, the 3d preform structure is expected to be used in various fields requiring delamination prevention, especially in the aircraft industry.

• Design Convergence Study
• /
• 제16권1호
• /
• pp.97-109
• /
• 2017

Interest in the exterior design of buildings has increased in recent years. Demand for various architectural structures is increasing. However, domestic form liner and design are still limited. Thus, this research uses 3D printers to omit the existing mold production process. Use digital data to produce products economically using various materials. It can be hoped that extending the lifespan of the concrete structure will reduce the cost of saving costs. The purpose of this study is to utilize the 3D printers to develop the design of a suitable formative shape for the purposes of the concrete. In this study, 3D printed form enables the possibility that the actual application is practical. Consideration for the artistic design of the art line was proposed for the purpose of considering the use of concrete structures for concrete structures.

• Journal of the Korea institute for structural maintenance and inspection
• /
• 제20권2호
• /
• pp.60-66
• /
• 2016

Polyurethane foam index a of the cell structure and the absorption change by using the foam stabilizer of six to investigate the polyurethane foam index producing the agent to the siloxane analyzed with silicon foam stabilizer with FE-SEM in accordance with the characteristics of the silicon-based foam stabilizer cell structure of the primary DC-193 on the chain ends is PO n dog bond, DC-2585, DC-5125, DC-198 has been confirmed as a close cell, silicone surfactant is combined EO n dog to a siloxane main chain terminus DC-5043 and DC-5598 that appeared to open cell structure. In addition, most absorption of the DC-5043 appeared was the size of the open cell greatest formed by the absorption of the cell structure change this absorption of the size of the close cell most detailed and uniform DC-193 appeared small household water-resistant best many showed. The performance test of the water was found to be excellent.

• Proceedings of the KAIS Fall Conference
• /
• 한국산학기술학회 2012년도 춘계학술논문집 2부
• /
• pp.646-648
• /
• 2012

본 연구에서 다루는 복합재료는 알루미늄 폼으로써 다공성 구조체로 고체 알루미늄 금속에 비하여 비중이 1/10 정도로 작고, 충격에너지 흡수가 우수하다. 본 연구에서는 다공성 심재를 갖는 복합재료 알루미늄 폼 코어의 충격실험을 실시하여 기계적 특성을 파악하였다. 시험편은 알루미늄 폼 코어를 갖는 복합재료로써 시험편에 50J의 저 충격에너지를 가하도록 하였다. 그 결과, 모든 실험에서 스트라이커가 상부면재 통과 시 최대하중이 나타났고, 이때의 최대하중 값은 약 5.5 KN으로 나타났다. 또한 최대 하중 발생 시간은 50J일 때 약 4.2 ms가 나왔다. 최대 하중이 발생한 후, 즉 상부 면재 통과 후에 실험에서는 약 10 mm정도를 더 뚫으면서 심재에 까지 손상을 주었지만 하부 면재에는 손상을 주지 못하였다. 이로써 스트라이커가 알루미늄 폼 코어 샌드위치 복합재료를 통과 할 때 상부면재 통과 시 최대 하중이 발생하고 심재를 지나며 서서히 감소되는 것을 볼 수 있었다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 한국방송공학회 2011년도 추계학술대회
• /
• pp.307-309
• /
• 2011

본 논문에서는 SIMD(Single Instruction Multiple Data) 프로세서를 사용한 HEVC 부호화기의 하다마트 트랜스폼 고속화를 제안한다. 본 논문에서는 MMX와 SSE 레지스터를 사용하여 하다마드 트랜스폼을 SIMD 연산으로 대체함으로써 메모리 접근 횟수와 명령어의 수를 줄여 부호화기를 고속화하였다. 또한, HEVC의 10비트 입력에 따른 SIMD 구조의 비효율적인 구현을 해결하기 위하여 하다마드 트랜스폼의 입력 픽셀 비트수를 감소시키는 IBDD(Internal Bit Depth Decreasing)를 제안했다. HEVC 부호화기에 하다마드 트랜스폼을 SIMD 연산으로 대체한 결과 부호화 효율의 저하 없이, 부호화기의 수행 시간은 10% 감소되었다.

• Composites Research
• /
• 제12권6호
• /
• pp.74-82
• /
• 1999

The static and fatigue characteristics of polyurethane foam cored sandwich structures are investigated. Three types of the specimens with the glass fabric faces and the polyurethane foam core are used; non-stitched. stitched, and stiffened sandwich specimen. Especially additional structural reinforcements with the twisted polyester and glass fiber for thickness direction are made to stitched sandwich structure panel to minimize the delamination of structure which is stitched the upper and lower faces through the core and the resin is impregnated Into stitched fiber with the characteristics of low viscosity of resin at resin flow temperature and cured together with during the curing process. Bending strength of stitched specimen which is 50 mm $50{\times}50{\;}mm$ pitched is improved by 50 % as com-pared with non-stitched specimen and stiffened specimen is improved 10 times more than non-stitched structure. After fatigue testing of $10^6$cycles by 20% of ultimate load under monotonic load, the bending fatigue strength of non-stitched specimen is decreased by 27% of monotonic bending strength, 39% for stitched structure and 20% for stiffened specimen. To verify the aging effect of polyurethane form core, Ultrasonic C-scanning equipment is used to detect the damage of skin laminate alone after fatigue test. From results of UT C-scan images, there is no defect that can be damaged occurred during fatigue test. It is concluded that the decrease of bending strength for foam cored sandwich specimen is caused by the decrease of stiffness due to the aging of polyurethane foam core during fatigue cycles.

• Korean Journal of Construction Engineering and Management
• /
• 제19권5호
• /
• pp.70-80
• /
• 2018

Recently, the construction industry has lively utilized system forms to improve the work productivity and safety of form work, and the beam table form is one of them. However, the beam table form is used limitedly for the construction of buildings where the same beam size is applied to every floor. To make it possible to apply the beam table form to a building where different beam sizes are designed according to the uses of floors, it was analyzed that among the components of the beam table form, the beam bracket, should be able to flexible adjust the size of the beam form only with simple operation. Therefore, the purpose of this study is to propose the conceptual design of "an adjustable beam bracket for beam table form" that allows the adjustment of beam form size with simple operation and has excellent applicability to construction sites as well. In case this study's conceptual design of adjustable beam bracket for beam table form is fabricated into a real thing, it is expected that the beam table form will be applicable to even buildings where different beam sizes are designed according to the uses of floors, thereby contributing to the improvement in the work productivity and safety of form work.

• Journal of the Korea institute for structural maintenance and inspection
• /
• 제26권6호
• /
• pp.120-127
• /
• 2022

Nitrogen oxide(NOx) is a major cause of air pollution, exists in the form of nitrogen monoxide and nitrogen dioxide, and is harmful to the human body. Recently, a number of studies to reduce NOx in the atmosphere have been conducted, and these efforts have been the same in the field of construction materials. It is known that NOx can be efficiently removed by using a photocatalytic reaction. In this study, the NOx removal performance of the foam composite using activated carbon(AC) and titanium dioxide(TiO₂) was investigated. AC was used to enhance the photocatalytic reaction of TiO₂ by increasing the internal specific surface area of the foam composite. In this study, foam composites were prepared using the substitution rate of AC as the main variable. The NOx removal performance of specimen was evaluated according to the test method presented in ISO-22197-1. The specific surface area of the foam composite showed a tendency to increase according to the AC content, but decreased at 15% or more. Also, when the AC substitution rate was 15%, the NOx removal efficiency was the highest.

• Proceedings of the Korean Information Science Society Conference
• /
• 한국정보과학회 2004년도 가을 학술발표논문집 Vol.31 No.2 (3)
• /
• pp.643-645
• /
• 2004

시맨틱 데이터는 인간이 의도한 정보를 효과적으로 기계에게 전달하는 정보 양식이다. 그러나 시맨틱 정보를 웹 브라우저를 통해 CGI 코드로 처리하는 방식은 정보 시스템내의 정보구조와 이의 처리 코드가 고착되는 문제점을 안고 있었다. 이를 해결하기 위해 본 논문에서는 시맨틱 정보를 담는 RDF 술어를 기술하는 XML 스키마를 제안한다. 해당 스키마로 기술된 RDF 술어는 HTML 폼으로 자동으로 생성되며, 해당 폼에서 받아들인 데이터를 기반으로 대응되는 RDF 문서를 생성하는데 사용된다. 제안된 스키마를 이용함으로써, 정보 시스템 내에서 RDF 구조의 동적인 변경이 용이하며, 표준화된 방식의 RDF 데이터 입력이 가능해지는 효과를 얻게 된다.