• Journal of Korean Association for Spatial Structures
• /
• v.7 no.5
• /
• pp.75-82
• /
• 2007

The present work measured and analyzed changes in the acoustics of a sound field which has a retractable ceiling. An 1/20 scale model of an openable space was built and measurement was carried out by varying the opened area of a ceiling. The most widely used room acoustic and design parameters, RT, EDT, and D50 were investigated. The results suggest that the use of RT as an acoustic design parameter may not be proper in an openable space and further it is likely to mislead the initial acoustic design of such spaces. It is mainly due to the characteristics of RT in which non-exponential decay processes are linearly fitted. Early decay times were found to be decreased in proportion to increaing the ratio of opened area. D50, an index of speech intelligibility, was effectively shows the influence of openings on the acoustics. It is also found that EDT and D50 at the seats, not directly exposed to the opened part of a ceiling, were almost linearly decreased in proportion to the ratio of opened area, while little influence was found for the opening ratio larger than 40% at the directly exposed seats to the opened part of a ceiling.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.7
• /
• pp.873-879
• /
• 2010

It is common to predict structural dynamic design parameters due to the change of design parameter, but to predict the amount of changed design parameter where the mass and stiffness are being modified are rarely found in previous literature. In this study, the changed design parameter in a proportional damping system is predicted by using sensitivity coefficients and an iterative method. The sensitivity coefficients are determined from the changes in eigenvectors; these changes are due to modification. This method is applied to a three-story shear structure. To validate the prediction of the changed design parameter, the results are compared to the reanalysis results; both results are in good agreement.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.4
• /
• pp.351-363
• /
• 2004

Equation of motion of non conservative system considering mass matrix, elastic stiffness matrix, load correction stiffness matrix by circulatory force's direction change and Winkler and Pasternak foundation stiffness matrix is derived. Also stability analysis due to the divergence and flutter loads is performed. And the influence of internal and external damping coefficient on flutter load is investigated applying the quadratic eigen problem solution. Additionally the influence of non-conservative force's direction parameter, internal and external damping and Winkler and Pasternak foundation on the critical load of Beck's and Leipholz's and Hauger's columns are investigated.

• Journal of KSNVE
• /
• v.5 no.2
• /
• pp.207-213
• /
• 1995

A new predictor-corrector explicit time integration algorithm is presented for solving structural dynamics problems. The basis of the algorithm is the implicit generalized-.alpha. method recently developed by the authors. Like its implicit parent, the explicit generalized-$\alpha$ method is a one- parameter family of algorithms in which the parameter defines the high-frequency numerical dissipation. The algorithm can be utilized effectively for linear and nonlinear structural dynamics calculations is which numerical dissipation is needed to reduce spurious oscillations inherent in non-dissipative time integration methods used to solve wave propagation problems.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.3
• /
• pp.57-65
• /
• 1990

The finite element menthod for the investigation of the static and dynamic stability of the plane framed structures subjected to non-conservative forces is presented. By using the Hermitian polynomial as the shape function, the geometric stiffness matrix, the load correction stiffness matrix for non-conservative forces, and the matrix equation of internal and external damping are derived. Then, a matrix equation of the motion for the non-conservative system is formulated and the critical divergence and flutter loads are determined from this equation.

• Journal of KSNVE
• /
• v.10 no.1
• /
• pp.64-73
• /
• 2000

We present finite element equations in the Laplace-domain for linear viscoelastic and viscoelstically damped structures governed by a constitutive equation involving factional order derivative opeartors. These equations yield a nonstandard eigenproblem consisted of frequency dependent stiffness matrix. To solve this nonstandard eigenproblem we suggest an eigenvalue iteration procedure in the Laplace-domain. Improved Zenor and GHM material function type constitutive equations in the Laplace-domain are also available for this procedure. From above equations, complex eigenvalues and complex eigenvectors are obtained. Using obtained eigenvalues and eigenvectors, time domain analysis is performed by means of mode superposition. Finally, finite element solutions of viscoelastic and viscoeleastically damped sandwich beam are presented as an example.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.75-76
• /
• 2007

이 논문에서는 IS-95와 WCDMA의 Multi-mode로 동작하는 Multi-mode용 저전력 DDC filter 구조를 제안한다. 기존의 DDC구조의 경우 CIC의 통과대역 특성을 향상시켜 주지만, 저지대역의 감쇠특성은 오히려 나빠지는 문제점을 안고 있었다. 제안된 구조는 CIC 데시메이션 필터의 통과대역 특성은 더욱 향상시켜주며, 저지대역의 감쇠특성도 같이 향상시키는 특징을 가진다. 또한 제안된 절터는 각 필터의 면적을 감소시키기 위해 IS-95와 WCDMA의 각각의 모드에 대해 한 개의 필터를 설계한 후 각 모드에 따라 필터 탭 수를 달리하여 동작하는 Multi-mode의 저전력 구조로 구현하였다.

• Polymer(Korea)
• /
• v.29 no.3
• /
• pp.300-303
• /
• 2005

Polyurethane multi-layer and foam multi-layer were prepared with PU1000 and PU2000 made by poly(propylene glycol) (PPG) having the molecular weight of 1000 and 2000 g/mol, respectively. The damping and transmission loss of these materials were compared with PU1000 used as a reference. The damping peak of polyurethane multi-layer was shifted to the lower temperature compared with PU1000, while the damping peak of polyurethane foam multi-layer was shifted to the higher temperature and broaden. In terms of noise reduction, the transmission loss of polyurethane multi-layer was effective at the specific frequency range such as less than 100 Hz and around 600 Hz compared with PU1000. The transmission loss of polyurethane foam multi-layer was most effective in the whole experimental frequency range.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.1 s.68
• /
• pp.73-79
• /
• 2004

Tuned Mass Damper (TMD) was applied to control the vibration of an offshore structure due to ocean waves. The errors caused by the linearization of the fluid-structure interaction effect and the phenomena when using the linearized equation of motion in TMD design were analyzed. To determine the performance of TMD in controlling vibration, both regular waves with varying periods and irregular waves with different significant wave heights were used. When the offshore structure received regular waves with a period similar to the first natural period of structure. TMD performed well in terms of response reduction. Such was not the case for the other periods. however, In the case of irregular waves, TMD triggered the reduction of structural response for waves with relatively small significant wave height. For irregular waves with relatively big significant wave height, however, TMD did not show any control effect. Therefore, TMD is useful in reducing offshore structural vibration due to ambient waves, thereby helping secure fatigue life.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.2
• /
• pp.157-165
• /
• 2011

Base isolation system is widely used for reduction of dynamic responses of structures subjected to seismic load. Recently, research on a smart base isolation system that can effectively reduce dynamic responses of the isolated structure without accompanying increases in base drifts has been actively conducted. In this study, a smart base isolation system was applied to an arch structure subjected to seismic excitation and its control performance for reduction of seismic responses was evaluated. In order to make a smart base isolation system, 4kN MR dampers and low damping elastomeric bearings were used. Seismic response control performance of the proposed smart base isolation system was compared to that of the optimally designed lead-rubber bearing(LRB) isolation system. To this end, an artificial ground motion developed based on KBC2009 design response spectrum was used as a seismic excitation. Fuzzy control algorithm was used to control MR damper in the smart base isolation system and multi-objective genetic algorithm was employed to optimize the fuzzy controller. Based on numerical simulation results, it has been shown that the smart base isolation system can drastically reduce base drifts and seismic responses of the example arch structure in comparison with LRB isolation system.