• Journal of the Korean Magnetics Society
• /
• v.10 no.5
• /
• pp.203-209
• /
• 2000

Top synthetic spin valves with structure Ta/NiFe/CoFe/Cu/CoFe(P 1)/Ru/CoFe(P2)/FeMn/Ta on Si (100) substrate with natural oxide were prepared by dc magnetron sputtering system. We have changed only the thickness in free layers and the thickness difference (Pl-P2) in two ferromagnetic layers separated by Ru, and investigated the effect of magnetic film thickness on interlayer coupling field in spin valve with synthetic antiferromagnet. According to the decrease of free layer thickness, interlayer coupling field was increased due to the magnetostatic coupling(orange peel coupling). In case of t$\_$P1/>t$\^$P2/, interlayer coupling field agreed well with the modified Neel model suggested in conventional spin valve structures by Kools et al. However, in case of t$\_$P1/>t$\^$P2/, it was found that the interlayer coupling field was not explained by the Modified Neel Model and was confirmed the necessity of further remodeling. The dependence of Cu thickness on the interlayer coupling field was investigated and 10 Oe of interlayer coupling field was obtained when the Cu thickness is 32 $\AA$.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.1
• /
• pp.11-26
• /
• 1984

The aim of this study is to establish a synthetical optimal method that simultaneously analyze and design reinforced concrete flat slab-column structures involving multi-constraints and multi-design variables. The variables adopted in this mathematical models consist of design variables including sectional sizes and steel areas of frames, and analysis variable of the ratio of bending moment redistribution. The cost function is taken as the objective function in the formulation of optimal problems. A number of constraint equations, involving the ultimate limit state and the serviceability limit state, is derived in accordance with BSI CP110 requirements on the basis of limit state design theory. Both objective function and constraint equations derived from design variables and an analysis variable generally become high degree nonlinear problems. Using SLP as an analytical method of nonlinear optimal problems, an optimal algorithm is developed so as to analyze and design the structures considered in this study. The developed algorithm is directly applied to a few reinforced concrete flat slab-column structures to assure the validity of it and the possibility of optimization From the research it is found that the algorithm developed in this study is applicable to the optimization of reinforced concrete flat slab column structures and it converges to a optimal solution with 4 to 6 iterations regardless of initial variables. The result shows that an economical design can be possible when compared with conventional designs. It is also found that considering the ratio of bending moment redistribution as a variable is reasonable. It has a great effect on the composition of optimal sections and the economy of structures.

• Applied Chemistry for Engineering
• /
• v.3 no.4
• /
• pp.605-613
• /
• 1992

NCO-terminated prepolymers were synthesized by reacting carbonate-type polyol(PTMCG)($M_w=1,000$ and 2,000) with MDI and N-methyldiethanolamine, as a chain extender. Carbonate-type polyurethane containg zwitterionic group was prepared by reacting the prepolymer with 1,3-propane sultone. From the IR and NMR spectra of model reactions, it was known that the ionization occurred under the same condition. The structure of zwitterionic carbonate-type polyurethane(ZPU) therefore could be confirmed from the model reactions. Glass transition temperature(Tg) ranged between $-15{\sim}-30^{\circ}C$ from the thermal data. Tg was between $-15{\sim}-18^{\circ}C$ for a series of ZPU10 samples and between $-25{\sim}-26^{\circ}C$ for a series of ZPU20 polymers. Tensile strength increased with mole ratio of ionic content. On the contrary, elongation was rather dropped with mole ratio of ionic content. ZPU10-30 having better tensile strength and less elongation was selected as a membrane for the concentration of ethanol aqueous solution through pervaporation. To obtain the better selectivity, it was crosslinked with HMDI. In the swelling test, it showed the higher swelling degree at around 50wt% ethanol concentration due to the plastization effect of ethanol. To optimize the separation capacity, two operating factors-feed concentration and temperature-were considered. The overall separation capacity was as follows : separation factor, 2~83.2 ; the flux, $25.4{\sim}58.8g/m^2hr$.

• Information Systems Review
• /
• v.19 no.3
• /
• pp.1-21
• /
• 2017

The Internet of Things (IoT) analysis aims to verify the technical characteristics, performance expectations, and adoption intentions of IoT. This work refers to IoT data from foreign and domestic publications and websites as well as aims to benefit related organizations by referring to reports from agencies. The literature review summarizes the relevant theories and background of the unified theory of acceptance and use of technology. The SPSS 22.0 software and structural equation models (smart PLS 2.0) are used in the data analysis. Technical statistics analysis, reliability analysis, validity analysis, structural equation models, and statistical methods are employed to test the research hypotheses, that is, the technical characteristics of IoT will have positive effects on its performance expectations. This study introduces the characteristics and expected performance of IoT to present relevant IoT guidelines for companies that aim to adopt such technology.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.2
• /
• pp.41-47
• /
• 1999

In this paper, we report 3D-simulations of a plasma etching process by employing cell-removal algorithm takes into account the mask shadow effect os well as spillover errors. The developed simulator haas an input interface to take not only an analytic form but a Monte Carlo distribution of the ions. The graphic user interface(GUI) was also built into the simulator for UNIX environment. To demonstrate the capability of 3D-SURFILER(SURface proFILER), we have simulated for a typical contact hole structure with 36,000($30{\times}40{\times}30$) cells, which takes about 20 minutes with 10 Mbytes memory on sun ultra sparc 1. as an exemplary case, we calculated the etch profile during the reactive ion etching(RIE) of a contact hole wherein the aspect ratio is 1.57. Furthermore, we also simulated the dependence of a damage parameter and the evolution of topography as a function of the chamber pressure and the incident ion flux.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.1
• /
• pp.53-60
• /
• 2011

In this study, the priority was assessed and the compensation relationships were analyzed with regard to the issue of port development with conflicts among decision makers. First, the assessment factors were selected by the relevant literatures on port development, and fuzzy structure modeling was used to select assessment factors via structuralization analysis. Second, the local residents, port users, and local government were chosen as the main port-development related entities, and the analytic hierarchy process was used to calculate the total assessment value. Third, the justice based on majority power rule method was used as an assessment method that would minimize the amount of complaints according to the total assessment results and the alternative selection when a partnership was formed among the assessment entities. Moreover, the compensation issue according to the alternative selection was quantified, and the compensation relationships were analyzed. As a result, it was found that port development in Busan must be the top priority in terms of port development in South Korea, that awareness of environmental issues must be promoted among the port users, and that the local governments must promote environmental incentive policies for Environment-friendly port development.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.05a
• /
• pp.541-544
• /
• 2006

Currently the bolt joint defect occurs from the steel bridge which is in the process of using but that investigation about each kind defect is lacking state. Research to see consequently the high strength bolt joint sliding conduct bring the model it used a structural analysis program LUSAS numerical analysis execution and a plan for Steel Box Girder Bridge copying full-size H-Beam and plan pretensioned bolt force 100%. 75%, 50% and 25% pretensioned force it acted in standard. And a hold an examination, against the sliding loads which it follows in the pretensioned force it will analysis.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.8
• /
• pp.31-37
• /
• 2001

Following the recent trends of reducing the size of multimedia devices, we tried for the development of a compact-sized speaker to produce low-frequency sounds efficiently. For this work, equivalent-circuit analysis was used to get fundamental resonant frequency and then the structure of speaker components has been changed appropriately. As a result, an 80mm small-sized speaker was developed. The performance test showed that the resonant frequency of our system is 79 Hz while that of numerical analysis was 81Hz. At a distance of 1m from our speaker, the frequency ranges 80 Hz to 15kHz and the average sound pressure was found to be 84±2 dB. The second (at 400 Hz) and the third (at 100 Hz) high-frequency distortions of our system were 0.5% and 1.8% respectively, which is to be compared with the distortions of 0.9% and 6% in conventional speakers.

• Korean Journal of Crystallography
• /
• v.6 no.1
• /
• pp.43-48
• /
• 1995

The crystal structure of P-toluenesulfonanilide, C13H13NO2S is monoclinic, space group P21/c, a=8.777(1)Å, b=9.784(2)Å, c=15.139(2)Å, β=99.00(1)°, Z=4, V=1284.0(6)Å3, Dc=1.28g/cm33, λ(Mo-Kα)=0.71069Å, μ=2.3cm-1, F(000)=520, Temperature : 293±3K, R=0.038 for 711 Fo<3.0σ unique observed reflection. The structure was determuned by direct method and refined by full-matrix least squares refinement. Two benzene rings have the dihedral angle of 68.4°. Moleculs are accumulated according to the c axis with two fold screw and contacted by van der Walls force.

• Asia Marketing Journal
• /
• v.7 no.3
• /
• pp.1-27
• /
• 2005

This study investigated the effects of two types of customer extra-role behavior (citizenship and badness behavior) on perceived service quality, customer satisfaction, and repurchase intention. The model was tested with a sample of sports center customers by using structural equation modeling. The findings supported the effects of customer citizenship and badness behavior, and all structural path coefficients were significant. However, the differential effects of customer citizenship and badness behavior on perceived service quality were not significant. Lastly, perceived service quality fully mediated the effects of customer citizenship and badness behavior on customer satisfaction and repurchase intention. The results of the present study demonstrate that service organizations need to manage all two types of customer behavior. Further, it provides new insights into the relationships among customer's extra-role behavior, customer satisfaction, and repurchase intention.