• KEPCO Journal on Electric Power and Energy
• /
• v.1 no.1
• /
• pp.39-46
• /
• 2015

A outdoor termination installed at the outdoor substation is required to connect undergroud cables and overhead transmission lines. The joint box for AC transmission system is already developed and widely used to interconnect overhead and undergroud systems. But the development of the joint box for DC transmission system was only introduced from China and Japan, but theire developemnt staus and core technologies were not fully reported. In order to implement HVDC systems connecting ovehead transmission lines and undergroud cables, a outdoor termination should be developed, but the detailed specifications and information of this device were not reported. It is estimated that the development of the joint box for DC environment has some technical obstacles including insulating materials, electric field mitigation, thermal temperature rise, and space charge accumuations. Among this, the most important one is the DC elctrical insualtion design. Therefore, in order to investigate the DC elctrical insualton design of outdoor termination, the design of AC slip-on type outdoor termination is reffered, and DC electric field analysis performed to verify the possiblity of application of AC joint box into DC joint box. Especially for DC electric field analysis, temperature rise of insualting materials of a joint box was considered, because the conductivity of materials could be changed due to temperature rise. Furthermore, DC electric field analysis considering transinet state, and polarity reversal state were also investigated to verify which state is the most severe condition for the DC joint box. From the simualtion resulsts, it was shown that the value and the position of maximum electric field was obtained comparing AC state, DC state without temperaure rise, and DC state with temperaure rise. And it was confimred that severe DC electric field was observed considing temperaure rise. Finally, in order to reduce DC eletric field intensifation, different configuration of the joint box was applied and it was not possible to obtain satisfactory results. It means that the slight change of configuration of AC joint box was not the suitable soluton for DC joint box. It is essential to establish novel DC insulaton design skills and method for DC joint box to commercialze this product in the near future.

• Journal of Wetlands Research
• /
• v.21 no.1
• /
• pp.34-42
• /
• 2019

Baseflow which is one of the unmeasurable components of streamflow and slowly flows through underground is important for water resource management. Despite various separation methods from researches preceded, it is difficult to find a significant separation method for baseflow separation. This study applied the MRC method and developed the improved approach to separate baseflow from total streamflow hydrograph. Previous researchers utilized the whole streamflow data of study period at once to derive synthetic MRCs causing unreliable results. This study has been proceeded with total nine areas with gauging stations. Each three areas are selected from 3 domestic major watersheds. Tool for drawing MRC had been used to draw MRCs of each area. First, synthetic MRC for whole period and two other MRCs were drawn following two different criteria. Two criteria were set by different conditions, one is flow condition and the other is seasonality. The whole streamflow was classified according to seasonality and flow conditions, and MRCs had been drawn with a specialized program. The MRCs for flow conditions had low R2 and similar trend to recession segments. On the other hand, the seasonal MRCs were eligible for the baseflow separation that properly reflects the seasonal variability of baseflow. Comparing two methods of assuming MRC for baseflow separation, seasonal MRC was more effective for relieving overestimating tendency of synthetic MRC. Flow condition MRCs had a large distribution of the flow and this means accurate MRC could not be found. Baseflow separation using seasonal MRC is showing more reliability than the other one, however if certain technique added up to the flow condition MRC method to stabilize distribution of the streamflow, the flow conditions method could secure reliability as much as seasonal MRC method.

• Cross-Cultural Studies
• /
• v.53
• /
• pp.131-161
• /
• 2018

Emotional expressions are expressions that show the internal condition of mind or consciousness. Types of emotional expressions include vocabulary that describes emotion, the composition of sentences that expresses emotion such as an exclamatory sentence and rhetorical question, expressions of interjection, appellation, causative, passive, adverbs of attitude for an idea, and a style of writing. This study focuses on vocabulary that describes emotion and analyzes the aspect of translation when emotional expressions of 'Hu(怖)' is shown on "Kokoro". The aspect of translation was analyzed by three categories as follows; a part of speech, handling of subjects, and classification of meanings. As a result, the aspect of translation for expressions of Hu(怖)' showed that they were translated to vocabulary as they were suggested in the dictionary in some cases. However, they were not always translated as they were suggested in the dictionary. Vocabulary that described the emotion of 'Hu(怖)' in Japanese sentences were mostly translated to their corresponding parts of speech in Korean. Some adverbs needed to add 'verbs' when they were translated. Also, different vocabulary was added or used to maximize emotion. However, the correspondence of a part of speech in English was different from Korean. Examples of Japanese sentences that expressed 'Hu(怖)' by verbs were translated to expression of participles for passive verbs such as 'fear', 'dread', 'worry', and 'terrify' in many cases. Also, idioms were translated with focus on the function of sentences rather than the form of sentences. Examples, what was expressed in adverbs did not accompany verbs of 'Hu (怖)'. Instead, it was translated to the expression of participles for passive verbs and adjectives such as 'dread', 'worry', and 'terrify' in many cases. The main agents of emotion were shown in the first person and the third person in simple sentences. The translation on emotional expressions when a main agent was the first person showed that the fundamental word order of Japanese was translated as it was in Korean. However, adverbs of time and adverbs of degree tended to be added. Also, the first person as the main agent of emotion was positioned at the place of subject when it was translated in English. However, things or the cause of events were positioned at the place of subject in some cases to show the degree of 'Hu(怖)' which the main agent experienced. The expression of conjecture and supposition or a certain visual and auditory basis was added to translate the expression of emotion when the main agent of emotion was the third person. Simple sentences without a main agent of emotion showed that their subjects could be omitted even if they were essential components because they could be known through context in Korean. These omitted subjects were found and translated in English. Those subjects were not necessarily humans who were the main agents of emotion. They could be things or causes of events that specified the expression of emotion.

• Journal of The Korean Association For Science Education
• /
• v.43 no.1
• /
• pp.49-57
• /
• 2023

The purpose of this study is to analyze the school biology curriculum of the Royal Society of Biology (RSB) for school biology education in the United Kingdom (UK), and to examine the implications for Korean school biology education. The RSB school biology curriculum consists of three dimensions (the practices of biology, the concepts of biology, and the application of biology) and seven big questions. The contents of RSB school biology curriculum are structured according to age, 5-11, 11-16, and 16-19. The practices of biology of the UK RSB school biology curriculum emphasize biology activities should be linked to other communities and communicated and shared through evidence-based discussions. The concepts of biology dimension of the UK RSB school biology curriculum systematized the contents to be detailed considering school-level and ages with 5-7, 7-11, 11-14, 14-16, and 16-19 years old. The UK RSB biology curriculum is composed of human health, biological structure and function, biological growth and reproduction, and biological coexistence, showing a significant difference from Korean national curriculum when comparing the content elements with the core concepts of biology. In terms of the application of biology of the RSB school biology curriculum, three themes were commonly applied to all students, regardless of school level or age, such as development of application methods to promote health and environmental welfare, evaluation of the impact and application of biology knowledge. However, the content elements of the three themes were systematized according to the ages of 5-11, 11-16, and 16-19 years old. It is necessary to reorganize the contents of biology curriculum in Korea by referring to the content system of the UK RSB biology curriculum and to research ways to strengthen connectivity according to age or school level as well as dimensions and big questions.

• Journal of the Korean Society of International Agriculture
• /
• v.31 no.1
• /
• pp.8-16
• /
• 2019

Alternatives for increasing the competitiveness of locally manufactured agricultural machinery in domestic and foreign markets has been proposed. This was done by analyzing the major agricultural machinery's price and market share as well as their performance and quality. In the Korean domestic market, the market share of Japanese agricultural machinery has been identified to be 14.5% for tractors, 31.1% for combine harvesters, and 35.8% for rice transplanters, and on track for further increase. Japanese manufacturers' domestic patent shares are 58.5% for tractors, 79.9% for combine harvesters, and 69.8% for rice transplanters, showing the dire need for Korean domestic firms to expand their technological rights. To strengthen the industrial competitiveness of agricultural machinery, therefore, researches that develop the fundamental and elemental technology to reduce the frequency of breakdown should be needed in the short term. To achieve this, it is imperative to establish technology roadmap, promote greater cooperation between academia and industry, and systematically increase research funding. In addition, as a long-term solution for enhancing the competitiveness, an establishment of Agricultural Equipment Technology Institute is strongly recommended to systematically support R&D for developing core technologies, particularly high-quality components that guarantee durability and quality.

• Journal of Korean Society of Disaster and Security
• /
• v.16 no.4
• /
• pp.45-59
• /
• 2023

The global focus on mitigating climate change has traditionally centered on carbon dioxide, but recent attention has shifted towards methane as a crucial factor in climate change adaptation. Natural settings, particularly aquatic environments such as wetlands, reservoirs, and lakes, play a significant role as sources of greenhouse gases. The accumulation of organic contaminants on the lake and reservoir beds can lead to the microbial decomposition of sedimentary material, generating greenhouse gases, notably methane, under anaerobic conditions. The escalation of methane emissions in freshwater is attributed to the growing impact of non-point sources, alterations in water bodies for diverse purposes, and the introduction of structures such as river crossings that disrupt natural flow patterns. Furthermore, the effects of climate change, including rising water temperatures and ensuing hydrological and water quality challenges, contribute to an acceleration in methane emissions into the atmosphere. Methane emissions occur through various pathways, with ebullition fluxes-where methane bubbles are formed and released from bed sediments-recognized as a major mechanism. This study employs Biochemical Methane Potential (BMP) tests to analyze and quantify the factors influencing methane gas emissions. Methane production rates are measured under diverse conditions, including temperature, substrate type (glucose), shear velocity, and sediment properties. Additionally, numerical simulations are conducted to analyze the relationship between fluid shear stress on the sand bed and methane ebullition rates. The findings reveal that biochemical factors significantly influence methane production, whereas shear velocity primarily affects methane ebullition. Sediment properties are identified as influential factors impacting both methane production and ebullition. Overall, this study establishes empirical relationships between bubble dynamics, the Weber number, and methane emissions, presenting a formula to estimate methane ebullition flux. Future research, incorporating specific conditions such as water depth, effective shear stress beneath the sediment's tensile strength, and organic matter, is expected to contribute to the development of biogeochemical and hydro-environmental impact assessment methods suitable for in-situ applications.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.1
• /
• pp.285-301
• /
• 2020

Looking at the problem of aging in the nation from a demographic perspective, it is not a problem of the overall population, but of the structure of the population. It is the baby boomer and post-baby boomers, the largest population in the country. Baby boomers were born between 1955 and 1963, and currently have a population of 7001,333, which is 13.6 percent (as of 2015). The Post-Baby Boomer generation was born between 1964 and 1974, with a total population of 9,567,171, accounting for 18.8 percent of the total population. In particular, baby boomers and post-baby boomers (32.4% of the total population) have begun to retire or will retire soon. The average life expectancy continues to increase due to the development of medical technology, and the falling birth rate of newborns and the declining population of the production population are darkening the domestic economy. In a policy proposal aimed at easing the nation's falling economic growth rate, women's participation rate is as high as Sweden and men's efforts to increase it as high as Japan's, while the elderly rate is desirable to maintain Korea's high level. This is because the expansion of the elderly generation's participation in economic activities could ease a sharp drop in economic growth and reduce the burden of supporting the elderly population. The study, based on this social problem awareness and problem solving plan, looks at the relationship between career orientation and satisfaction in start-up education based on the diverse career base of active seniors, and also suggests the importance of customized start-up education on the diversity of active seniors by clarifying the relationship between them, and suggests the desirable direction of senior start-up policy design, funding, and start-up education. Based on the theoretical background, the concept of five factors was defined: active senior, career-oriented, satisfaction level of start-up education, willingness to start a business, and the concept definition of an active senior, which is particularly key to the baby boomers in their 50s and 60s, is generally regarded as a source of consumption or welfare benefits, but in this study, the concept of active start-up is reflected in the domestic start-up market by young people in their 40s, 50s and 60s. As a result of a hypothesis test. Hypothesis 1 and Hypothesis 5: Career orientation has been verified to affect the willingness to start a business and the behavior of preparation for a start-up. Hypothesis 3: The willingness to start a business has been verified as having an effect between startup preparation actions. Hypothesis 4: The satisfaction level of start-up education has been verified to affect start-up preparation behavior. However, hypothesis 2: The satisfaction level of education for start-ups does not affect the willingness to start a business. Such results can be inferred that satisfaction in start-up education does not have a direct effect on the will to start a business and increases the will to start a business through the influence of personal career orientation.

• Journal of Intelligence and Information Systems
• /
• v.24 no.4
• /
• pp.171-196
• /
• 2018

With the development of the web, two-way communication and evaluation became possible and marketing paradigms shifted. In order to meet the needs of consumers, web design trends are continuously responding to consumer feedback. As the web becomes more and more important, both academics and businesses are studying consumer emotions and satisfaction on the web. However, some consumer characteristics are not well considered. Demographic characteristics such as age and sex have been studied extensively, but few studies consider psychological characteristics such as regulatory focus (i.e., emotional regulation). In this study, we analyze the effect of web style on consumer emotion. Many studies analyze the relationship between the web and regulatory focus, but most concentrate on the purpose of web use, particularly motivation and information search, rather than on web style and design. The web communicates with users through visual elements. Because the human brain is influenced by all five senses, both design factors and emotional responses are important in the web environment. Therefore, in this study, we examine the relationship between consumer emotion and satisfaction and web style and design. Previous studies have considered the effects of web layout, structure, and color on emotions. In this study, however, we excluded these web components, in contrast to earlier studies, and analyzed the relationship between consumer satisfaction and emotional indexes of web-style only. To perform this analysis, we collected consumer surveys presenting 40 web style themes to 204 consumers. Each consumer evaluated four themes. The emotional adjectives evaluated by consumers were composed of 18 contrast pairs, and the upper emotional indexes were extracted through factor analysis. The emotional indexes were 'softness,' 'modernity,' 'clearness,' and 'jam.' Hypotheses were established based on the assumption that emotional indexes have different effects on consumer satisfaction. After the analysis, hypotheses 1, 2, and 3 were accepted and hypothesis 4 was rejected. While hypothesis 4 was rejected, its effect on consumer satisfaction was negative, not positive. This means that emotional indexes such as 'softness,' 'modernity,' and 'clearness' have a positive effect on consumer satisfaction. In other words, consumers prefer emotions that are soft, emotional, natural, rounded, dynamic, modern, elaborate, unique, bright, pure, and clear. 'Jam' has a negative effect on consumer satisfaction. It means, consumer prefer the emotion which is empty, plain, and simple. Regulatory focus shows differences in motivation and propensity in various domains. It is important to consider organizational behavior and decision making according to the regulatory focus tendency, and it affects not only political, cultural, ethical judgments and behavior but also broad psychological problems. Regulatory focus also differs from emotional response. Promotion focus responds more strongly to positive emotional responses. On the other hand, prevention focus has a strong response to negative emotions. Web style is a type of service, and consumer satisfaction is affected not only by cognitive evaluation but also by emotion. This emotional response depends on whether the consumer will benefit or harm himself. Therefore, it is necessary to confirm the difference of the consumer's emotional response according to the regulatory focus which is one of the characteristics and viewpoint of the consumers about the web style. After MMR analysis result, hypothesis 5.3 was accepted, and hypothesis 5.4 was rejected. But hypothesis 5.4 supported in the opposite direction to the hypothesis. After validation, we confirmed the mechanism of emotional response according to the tendency of regulatory focus. Using the results, we developed the structure of web-style recommendation system and recommend methods through regulatory focus. We classified the regulatory focus group in to three categories that promotion, grey, prevention. Then, we suggest web-style recommend method along the group. If we further develop this study, we expect that the existing regulatory focus theory can be extended not only to the motivational part but also to the emotional behavioral response according to the regulatory focus tendency. Moreover, we believe that it is possible to recommend web-style according to regulatory focus and emotional desire which consumers most prefer.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.3
• /
• pp.70-82
• /
• 2023

The recent surge of IT and data acquisition is shifting the paradigm in all aspects of life, and these advances are also affecting academic fields. Research topics and methods are being improved through academic exchange and connections. In particular, data-based research methods are employed in various academic fields, including landscape architecture, where continuous research is needed. Therefore, this study aims to investigate the possibility of developing a landscape preference evaluation and prediction model using machine learning, a branch of Artificial Intelligence, reflecting the current situation. To achieve the goal of this study, machine learning techniques were applied to the landscaping field to build a landscape preference evaluation and prediction model to verify the simulation accuracy of the model. For this, wind power facility landscape images, recently attracting attention as a renewable energy source, were selected as the research objects. For analysis, images of the wind power facility landscapes were collected using web crawling techniques, and an analysis dataset was built. Orange version 3.33, a program from the University of Ljubljana was used for machine learning analysis to derive a prediction model with excellent performance. IA model that integrates the evaluation criteria of machine learning and a separate model structure for the evaluation criteria were used to generate a model using kNN, SVM, Random Forest, Logistic Regression, and Neural Network algorithms suitable for machine learning classification models. The performance evaluation of the generated models was conducted to derive the most suitable prediction model. The prediction model derived in this study separately evaluates three evaluation criteria, including classification by type of landscape, classification by distance between landscape and target, and classification by preference, and then synthesizes and predicts results. As a result of the study, a prediction model with a high accuracy of 0.986 for the evaluation criterion according to the type of landscape, 0.973 for the evaluation criterion according to the distance, and 0.952 for the evaluation criterion according to the preference was developed, and it can be seen that the verification process through the evaluation of data prediction results exceeds the required performance value of the model. As an experimental attempt to investigate the possibility of developing a prediction model using machine learning in landscape-related research, this study was able to confirm the possibility of creating a high-performance prediction model by building a data set through the collection and refinement of image data and subsequently utilizing it in landscape-related research fields. Based on the results, implications, and limitations of this study, it is believed that it is possible to develop various types of landscape prediction models, including wind power facility natural, and cultural landscapes. Machine learning techniques can be more useful and valuable in the field of landscape architecture by exploring and applying research methods appropriate to the topic, reducing the time of data classification through the study of a model that classifies images according to landscape types or analyzing the importance of landscape planning factors through the analysis of landscape prediction factors using machine learning.

• Journal of Plant Biology
• /
• v.36 no.4
• /
• pp.345-355
• /
• 1993

Anatomical study of the secondary xylem in Araliaceous plants, induding 7 genera and 11 species grown in Korea, was carried out to elucidate the relationship among genera in the family. Wood of Hedera has difbse porous and shows ulmiform pattern of angular vessels, simple perforation plate, and alternate pitting. In addition, its ray is homogeneous type II with only procumbent ray cell. Ring porous wood of Dendropanax shows ulmiform of angular vessels, simple perforation plate, alternate pitting, and heterogeneous type II ray, which has sometimes horizontal secretory cavity. Fatsia has diffuse porous wood, which shows ulmiform of angular vessels, scalariform perforation plate (3-9 bars), scalariform pitting, spiral thickening in the lateral wall of vessel, and heterogeneous type II ray with sheath cells. Kalopanax has ring porous wood, which shows ulmiform of circular vessels, simple perforation plate and alternate pitting, and heterogeneous type II ray. While K pictum appears tylose with septum, K pictum var. maximowczii appears tylose without septum. Echinopanax shows ring porous wood, ulmiform of angular vessels, simple perforation plate, scalariform pitting, and tylose with septum. And the ray of Echinopanax is paedomorphic type I composed of only upright cells. Acanthopanax genus is composed of diffuse porous wood, ulmiform of angular vessels, simple perforation plate and alternate pitting. In this genus, A. sessiliflorus has heterogeneous type II ray, apotracheal axial parenchyma and tylose with septum. A. senticosus appears paedomorphic type I with only upright cells, and tylose with septum. A. koreanum and A. sieboldianum have heterogeneous type II ray but have not tylose. Aralia is composed of ring porous wood, ulmiform of circular vessels, simple perforation plate, alternate pitting, heterogeneous type II ray, and tylose contained both septum and reticulate. On the basis of arrangement, shape, length and diameter of vessel element, the angle of end wall to vessel axis, and ray type, the line of specialization in these genera is as follow: from Fatsia, the most primitive, to the most highly specialized Aralia, throughout Hedera, Acanthopanax, Echinopanax, Dendropanax, and Kalopanax by turns. turns.