• Korean Journal of Ecology and Environment
• /
• v.37 no.2 s.107
• /
• pp.193-204
• /
• 2004

This study was conducted to evaluate both temporal and spatial dynamics of phytoplankton community and environmental parameters in a newly made reclaimed esturine lake (L. Hwaong). Monthly sampling was conducted at 4 sites covering the longest transect of longitudinal gradient of the lake from June to November, 2002. Total 5 classes 8 orders 26 families 83 genus 192 species were identified at all study sites during the study period. Phytoplankton total cell density ranged 24${\sim}$ 1,882 cells $mL^{-1}$ and highly varied both temporally and spatially. Total cell density was significantly related with salinity, pH, BOD, COD, SS, TN and TP concentration. Diatom density also was significantly correlated with salinity, SS, BOD, COD and TN concentration, Although there was spatial difference, a longtudinal gradient appeared in phytoplankton cell density, Chl-a, TN and TP concentration from the mouth of river in June and August. In conclusion, phytoplakton community structure was dominated by diatoms (Bacillariophyceae), and appeared to be largely influenced by salinity, precipitation, and nutrients during the summer and the fall.

• Journal of the Institute of Convergence Signal Processing
• /
• v.19 no.2
• /
• pp.61-67
• /
• 2018

Welding preheating means that the surface of the base material to which the metal is welded before the main welding is heated to a constant temperature. It prevents the cracks of the adjacent influences such as reduction of material hardening degree by controlling the cooling rate, suppression of segregation of impurities, prevention of thermal deformation, and moisture removal. For this reason, it is a necessary operation for high quality welding. Induction heating is an efficient heating method that converts electric energy into heat energy by applying electromagnetic induction phenomenon. Compared with combustion heat generated by gas and liquid, it is clean, stable, and economical as well as rapid heating. It can be heated regardless of the shape, depth and material of the heating body by modifying the shape of the frequency and the coil with a simple structure. In this paper, we implemented a low frequency welding preheating system using induction heating technique and observed the temperature changes of coil resistance, inductance and automotive transmission parts according to the height of each transmission in winding coil for three kinds of automotive transmission parts. We confirmed that the change of current is a very important factor in the low frequency heating.

• Korean Chemical Engineering Research
• /
• v.50 no.1
• /
• pp.35-40
• /
• 2012

In this study, 1-(2-methoxyethyl)-3-methylimidazolium methanesulfonate ionic liquid has been synthesized, characterized and tested with respect to carbon dioxide absorption with the aim to use it as advanced absorbent materials in fossil fuel processing. The ionic liquid was synthesized by a one step method, low cost. The thermal and chemical stability of selected ionic liquid has been investigated by DSC, TGA and the structure was verified by $^1H$-NMR spectroscopy. The solubility of carbon dioxide in the methanesulfonate-based ionic liquids were measured using a high-pressure equilibrium apparatus equipped with a variable-volume view cell at 30, 50 and $70^{\circ}C$ and pressure up to 195 bar. The results show that carbon dioxide solubilities of 1-(2-methoxyethyl)-3-methylimidazolium methanesulfonate increased with pressure increasing and temperature decreasing, and the carbon dioxide absorption capacity showed 27.6 $CO_2/IL$(g/kg) at $30^{\circ}C$, 13 bar.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.314-315
• /
• 2011

최근에 $Eu^{3+}$ 이온이 첨가된 적색 형광체에 대한 연구가 활발히 진행되고 있다. 현재 상업적으로 이용 가능한 적색 형광체와 비교하여 $GdVO_4$를 모체로 갖는 적색 형광체는 우수한 열적 안정성과 광학적 특성을 나타낸다. 본 연구에서는 고효율의 적색 형광체를 개발하기 위하여 고상 반응법을 사용하여 $Gd_{1-x}VO_4$ : $Eu_x^{3+}$ 형광체를 합성하였다. $Gd_{1-x}VO_4$ : $Eu_x^{3+}$ 형광체 분말 시료는 활성체인 $Eu^{3+}$의 함량을 0, 0.05, 0.10, 0.15, 0.20 mol로 변화시키며, 초기 물질 $Gd_2O_3$ (99.99%), $H_3BO_3$ (99.99%), $Eu_2O_3$ (99.9%)를 화학 적량으로 준비하였다. 분말은 볼밀과 건조 작업을 거친 후, 500$^{\circ}C$ 전기로에서 5시간 동안 하소 공정, 1,100$^{\circ}C$에서 6시간 동안 소성시켰다. 합성된 형광체 분말의 XRD 측정한 결과에 의하면, $Eu^{3+}$의 함량비에 관계없이 모든 분말 시료들에서 주 피크는 24.7$^{\circ}$와 33.2$^{\circ}$에 최대값을 갖는 (200)와 (112)면의 회절 신호들이 관측되었고, 상대적으로 약한 회절 세기를 갖는 (101), (211), (301), (103), (312)와 (420)면의 회절 신호들은 각각 18.6$^{\circ}$, 31.1$^{\circ}$, 40.1$^{\circ}$, 44.6$^{\circ}$, 49.2$^{\circ}$와 57.1$^{\circ}$에서 나타났다(Fig. 1). 이결과를 JCPDS(86-0996)와 비교함으로써, 합성된 형광체 분말의 결정 구조는 정방정계임을 확인할 수 있었다. $Eu^{3+}$의 함량비가 0.05 mol에서 0.15 mol로 증가함에 따라 주 피크인 (200)면의 회절 신호의 세기는 증가한 반면, 0.20 mol에서는 급격하게 감소하였으며, 이 경우에 반치폭의 크기는 0.16$^{\circ}$이었다. 결정 입자의 크기를 결정하기 위하여 (200)면의 회절 피크에 대한 정보를 잘 알려진 Scherrer의 식에 대입하여 계산한 결과, $Eu^{3+}$의 함량비가 0 mol인 경우에, 평균 크기는 48 nm이었다. $Eu^{3+}$ 함량비를 증가함에 따라 결정 입자의 크기도 비례하여 증가하였으며, 0.15 mol에서 최대값을 나타내었으나, 농도 억제 효과로 인하여 0.20 mol 에서는 현저히 감소하였다. 표면 형상의 변화를 관측한 SEM 측정 결과에 의하면, $Eu^{3+}$의 함량비가 0 mol에서 0.15 mol로 증가함에 따라 결정 입자의 모양은 사다리꼴 형태에서 모서리가 둥글게 깎인 구형으로 변형되는 것을 관측할 수 있었으며 평균 크기는 500 nm이었다(Fig. 2). $Eu^{3+}$의 함량이 0.20 mol인 경우에 결정 입자의 형상은 더욱 구형에 접근하였으나, 평균 크기는 최소값을 나타내었다. 실험 결과로부터, 적절한 함량비를 갖는 $Eu^{3+}$ 이온을 첨가함으로써 적색 형광체 $Gd_{1-x}VO_4$ : $Eu^{3+}$ 분말의 결정 크기와 발광 세기를 제어할 수 있음을 제안한다.

• Journal of Wetlands Research
• /
• v.16 no.2
• /
• pp.213-220
• /
• 2014

Recently, river maintenance is change due to concern for the environment increases. Thus, the river restoration and river environment is best part of river maintenance. In case of Korea, existing river is improvement straightly for flood control and transportation. When the stream channel is straightly, maintain stability is important. Thus, construction of levees along the river. The various river structures for the purpose of flood control and transportation are inhibit factors of longitudinal and lateral connectivity. Connectivity is defined as the maintenance of lateral, longitudinal, and vertical pathways for biological, hydrological, and physical processes. Long-term point of view, increased connectivity is very important for a healthy ecosystem composition. As the first step of river restoration, this study described theory and concept of river continuum and the numerical model was applied to a real topography to simulate the flow analysis with or without segregated and blocked space in the Mankyung river. The results of this study can be utilized to develop the watershed connectivity assessments methods in order to the river restoration.

• Korean Journal of Microbiology
• /
• v.27 no.1
• /
• pp.1-9
• /
• 1989

The locations of 5' ends as well as the splicing pattern of viral poly A(-) 19S RNA from monkey cells infected with SV40 were determined by a modification of primer extension method. The 5' end of this RNA mapped at the major cap site at nucleotide residue 325, used most frequently by SV40 late RNAs. The intron from nt.373 to nt.558 was removed as the ordinary cytoplasmic poly A(+) 19S RNA. The 3'end of this RNA was very heterogeneous and distributed over 1 kb upstream of polyadenylation site, as determined by S1 nuclease mapping. The reason for this normally initiated and spliced RNA to accumulate in the nucleus was investigated. In order to test whether the presence of unused 3' splice region on this RNA caused such subcellular distribution, cells were transfected with SV40 mutant KNA containing deletion around 3' splice site. The RNA deleted of 3' splice region accumulated mainly in the cytoplasm. This accumulation did not result from the increased stability of the RNA due to the deletion, since the wild type and mutant RNAs exhibited similar half lives after chase with actinomycin D. Therefore it is likely that the 19S spliced RNA is hindered from being transported into the cytoplasm due to some pre-splicing complexes formed at the unused 3' splice site.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.140-140
• /
• 2016

유기전계발광소자 (Organic Light Emitting Diode : OLED)는 보조광원이 필요 없고 천연색 표현이 가능하며, 낮은 소비 전력 및 저전압 구동 등의 장점으로 이상적인 디스플레이 구현이 가능하여 차세대 디스플레이로써 많은 이목을 끌고 있으나 제한된 수명과 안정성의 문제점을 안고 있다. 따라서 OLED의 열화 원인을 분석하고 수명을 연장하기 위한 체계적인 방법과 기술 개발이 중요하다. Impedance Spectroscopy는 이온, 반도체, 절연체 등의 벌크 또는 계면 영역의 전하 이동을 조사하는데 사용될 수 있어, OLED에서도 Impedance Spectroscopy를 이용하여 전하수송과 전자주입 메커니즘 등 폭넓은 전기적 정보를 얻을 수 있다. 본 연구에서는 Impedance Spectroscopy를 이용하여 경과시간에 따른 OLED의 임피던스 특성을 측정하여 열화 메커니즘을 분석하였다. 본 연구에서 OLED는 ITO / 2-TNATA (4,4,4-tris2-naphthylphenyl-aminotriphenylamine) / NPB (N,N'-bis-(1-naphyl)-N, N'-diphenyl-1,1'- biphenyl-4,4'-diamine) / Alq3 (tris(quinolin-8-olato) aluminum) / Liq / Al으로 구성된 녹색 형광 OLED를 제작하였다. OLED의 전계 발광 특성을 측정하기 위한 전원 인가장치로 Keithley 2400을 사용하여 전압과 전류를 인가하였고, 소자에서 발광된 휘도 및 발광 스펙트럼은 Photo Research사의 PR-650 Spectrascan을 사용하여 암실 환경에서 측정하였다. 임피던스 스펙트럼은 컴퓨터 제어 프로그래밍이 가능한 KEYSIGHT사의 E4990A를 사용하여 측정하였다. 임피던스 측정 전압은 0 V부터 2 V 간격으로 8 V까지, 주파수는 20 Hz에서 2 kHz의 범위로 설정하여 측정하였다. I-V-L과 임피던스 특성은 24 시간의 간격을 두고 실온에서 측정하였다. 그림은 경과시간에 따른 녹색 형광 OLED의 인가전압 2 V, 6 V의 Cole-Cole plot을 나타낸 것이다. 문턱전압 미만인 인가전압 2 V에서는 소자를 통하여 전류가 흐르지 않아 큰 반원 형태를 나타내었고, 시간이 경과함에 따라 소자 제작 직후엔 실수 임피던스의 최댓값이 $8982.6{\Omega}$에서 480 시간 경과 후엔 $9840{\Omega}$으로 약간 증가하였다. 문턱전압 이상인 인가전압 6 V에서는 소자 제작 직후 실수 임피던스의 최댓값이 $108.2{\Omega}$으로 작은 반원 형태를 나타내나 시간이 경과함에 따라 방사형으로 증가하는 것을 확인 할 수 있었고, 672 시간 경과 후엔 실수 임피던스의 최댓값이 $9126.9{\Omega}$으로 문턱 전압 미만 일 때와 유사한 결과를 나타내었다. 이러한 임피던스의 증가 현상은 시간이 경과함에 따라 OLED의 열화에 의한 것으로 판단된다.

• Korean Journal of Plant Taxonomy
• /
• v.46 no.1
• /
• pp.83-116
• /
• 2016

This study was carried out to investigate the flora and vegetation of Yokjido Island in Tongyeong-si, Korea. Vascular plants collected six times (from March of 2015 to January of 2016) were identified as 547 taxa in total, including 113 families, 354 genera, 487 species, four subspecies, 50 varieties, four forms and two hybrids. The first records from this region contained 314 taxa. In the flora of this area, endemic Korean species numbered eight taxa, and the red list of vascular plants according to the IUCN valuation basis numbered six taxa. In addition, 86 taxa of floristic regional indicator plants specially designated by the Ministry of Environment are included. Among the species investigated in this survey, 99 taxa were identified as specific species bio-geographically as compared floras of other terrestrial regions; 97 taxa of plants in southern areas and two taxa of limited distribution plants on the Korean Peninsula. In all, 74 naturalized plants were recorded in the investigated area. Samples of the forest vegetation of Yokjido Island were mainly classified as Pinus thunbergii community and the Alus firma community. Vertical structures of the communities were stable, and a DBH-class analysis showed that the dominant tree species would be maintained. If disturbance factors such as thinning could be halted, the composition of woody species and herbaceous species would change.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5D
• /
• pp.499-505
• /
• 2012

As the excavation depths during excavation works in urban sites are getting deeper and bigger, It is necessary to study for the improvements to solve the problems in the excavation processes. This research deals with the excavation method that can not only minimize the effect on the surrounding constructions, but also shorten the construction period of the excavation work. For this research, there have been an extensive literature review of the bibliographic data about Slurry Wall Method, which is recognized around the world, and the analysis of the major problems in the existing ineffective construction step. These efforts led to the technical improvements. Accordingly, a new construction method applied with the new technical factors has been suggested, and it was possible to compare Slurry Wall Method with the construction method and analyze them on the base of the examples using the suggested method. This new method decreased the excavation period by 15 days. It took only 33days to finish the excavation work, as compared to 48 days that can be seen on the pre-modification schedule. Furthermore, the suggested method in this research is safer, more economically feasible, and better for the environment than Slurry Wall Method. It will contribute to shortening the construction period of Slurry Wall Method in the end.

• Journal of the Korea Concrete Institute
• /
• v.29 no.1
• /
• pp.53-64
• /
• 2017

Ultra-high performance fiber-reinforced concrete (UHPFRC) is characterized by a post-cracking residual tensile strength with a large tensile strain as well as a high compressive strength. To determine a material tensile strength of UHPFRC, three-point loading test on notched prism and direct tensile test on doubly notched plate were compared and then the design tensile strength is decided. Shear tests on nine I-shaped beams with varied types of fiber volume ratio, shear span ratio and size effect were conducted to investigate shear behavior in web. From the test results, the stress redistribution ability represented as diagonal cracked zone was quantified by inclination of principal stress in web. The test results shows that the specimens were capable of resistance to shear loading without stirrup in a range of large deformation and the strength increase with post-cracking behavior is stable. However at the ultimate state all test specimens failed as a crack localization in the damaged zone and the shear strength of specimens is affected by shear span ratio and effective depth. Strength predictions show that the existing recommendations should be modified considering shear span ratio and effective depth as design parameters.