• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.2
• /
• pp.175-181
• /
• 2018

Electric pump system is new technology for next generation propulsion unit. The system has simple structure which dose not need gas generator, injector and turbine and might better pump for low cost and low payload rocket. Therefore, this paper suggests conceptual design of electric-pump Permanent-Magnet Synchronous Motor (PMSM) which has 50 kW & 50,000 RPM for rocket. To satisfy the system's requirement, electromagnetic analysis is conducted for suitable inner and outer diameter of stator and rotor which uses 4000 Gauss cylinder magnet and Inconel 718 can to fix whole rotor. Futhermore, to confirm rotational vibration, rotordynamics analysis is conducted. By this analysis, Campbell diagram is printed. From the diagram, natural frequency could be determined for the only motor and dynamo meter test bench.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.1
• /
• pp.114-120
• /
• 2013

Recently, navigation systems based on wireless communication have been applied to the internal structures such as building or ship. If a stable azimuth information is obtained, these systems can effectively guide the direction of the user's progress through the information and then can improve the performance of guidance. Since conventional method which has acquired an azimuth information using geomagnetic and acceleration sensor(azimuth sensor hereafter) is sensitive to the effects of the magnetic field, it has unstable error range according to the surrounding environment. In order to improve these problems, this paper presents a new relative azimuth estimation algorithm using the displacement of a mobile node and its rotation angle based on Wireless communication. For the performance assessment of the proposed algorithm, experiments using rotating arm are performed and the results are confirmed that the proposed system can estimate the relative azimuth without using additional sensors.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.145.2-145.2
• /
• 2011

메탄 하이드레이트는 낮은 온도와 높은 압력 조건에서 물분자들의 격자구조에 메탄가스분자가 포획되어 수소결합으로 형성되는 외관상 얼음과 비슷한 결정성 화합물이다. $1m^3$의 메탄 하이드레이트는 표준상태에서 $172m^3$의 메탄가스와 $0.8m^3$의 물로 분해되며, $-10^{\circ}C{\sim}-20^{\circ}C$의 온도에서는 하이드레이트 입자표면에서 생성되는 얼음막으로 인하여 상압에서도 안정하게 존재하는 자기보존 효과를 가지고 있다. 따라서 이와 같은 특징을 천연가스 수송 및 저장의 방법으로 이용할 경우 $-162^{\circ}C$의 초저온을 만들고 유지시키기 위하여 고가의 설비를 필요로 하는 기존의 LNG 수송방법을 대체할 수 있다. 특히 연간 천연가스 소비량을 0.4 ~ 1.0 million ton으로 가정했을 때, 하이드레이트 수송방법은 LNG 수송에 비해 18 ~ 25% 정도의 비용을 절약할 수 있는 경제적인 방법으로 알려져 있다. 그러나 하이드레이트를 인공적으로 제조할 경우 물분자와 가스분자의 반응율이 낮기 때문에 하이드레이트가 생성되기까지 많은 시간이 소요되며, 하이드레이트에 포획되는 가스분자의 양도 적다. 따라서 본 연구에서는 이와 같은 문제점을 해결하기 위하여 다공성 물질인 천연 제올라이트와 제올라이트 13X를 이용하여 제올라이트 혼합유체를 제조하였으며, 메탄가스와 반응시켜 하이드레이트를 생성시키는 실험을 수행하였다. 그 결과, 하이드레이트 생성 시 천연 제올라이트와 제올라이트 13X 모두 0.01 wt%의 혼합비율에서 가장 좋은 효과를 나타내었으며, 하이드레이트에 포획된 가스의 양은 같은 과냉도 조건에서 천연제올라이트와 제올라이트 13X 혼합유체를 이용하여 하이드레이트를 생성 시켰을 때, 증류수보다 각각 4배, 5배 높음을 보였다. 또한 낮은 과냉도에서 하이드레이트 생성 시 제올라이트, 제올라이트13X 혼합유체에서 하이드레이트 생성시간이 증류수에서 하이드레이트를 생성시킬 때보다 빨라짐을 확인하였다.

• Journal of the Korean Society of Groundwater Environment
• /
• v.6 no.4
• /
• pp.213-217
• /
• 1999

The river bank is one of the most important structure of fluvial hydraulic structure. Because the breaking of river bank is the cause of calamity, the durability and stability of river bank an very important factors. The breaking of river bank is the cause of the overflow of flood and the leakage of river bank. In this study, we investigated the leakage of river bank using the resistivity probing and estimated the volume of leakage using the weighted residual method The study basin of this study is the upstream of Sumji river basin and the factor of river bank is length 300 m and berm 2.0 m and width 4.5 m and height 4 m. We evaluated the leakage of river basin using using the resistivity probing and estimated the leakage volume using the weighted residual method. The result of this study, the leakage of river bank generated at the point of 39~45 m 80~90 m. 218~222 m. 214~250 m and the type of leakage is the rectangle and the polygon. And the leakage volume of this points evaluated 2.7$\times$$10^{-3}$ $\textrm{m}^3$/sec.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.15 no.3
• /
• pp.151-158
• /
• 2003

The study of velocity fields and vortex generation around the submerged breakwater can be utilized as materials related to understanding of wave dissipation mechanism, sediment transport, and stability of structure. In the present study, two-dimensional numerical wave flume, based on the VOF method to trace free surface, developed by Kim et al.(2001, 2002) was used to numerically simulate velocity fields and vortex generation around the impermeable submerged breakwater installed at the uniform bottom. Especially, the characteristics of vortex generation due to the geometry of the structure and incident wave conditions are examined through the analysis of averaged-velocity fields around the impermeable submerged breakwater. From the numerical simulations, it is confirmed that a counter clockwise vortex is formed in front of the structure and a clockwise vortex develops behind the structure. Also, incident wave height and period have an sensitive effect on the strength of vortex.

• Analytical Science and Technology
• /
• v.12 no.6
• /
• pp.565-570
• /
• 1999

The alcohol dehydrogenase (ADH) gene from Bacillus stearothermopilus was amplified by the polymerase chain reaction. The amplified DNA was inserted into the expression vector pGEX-KG, and expressed it as a fusion protein with glutathione S-transferase (GST) in E. coli. The recombinant ADH was produced by induction with 1 mM isopropyl-${\beta}$-D-thiogalactopyranoside at $37^{\circ}C$ and purified by glutathione affinity chromatography. The recombinant ADH exhibited high substrate specificity for ethanol. The activity of the recombinant ADH proceeded optimally at pH 9.0 and $70^{\circ}C$. The recombinant ADH was highly stable against high temperature. This thermostable alcohol dehydrogenase can be used for the enzymatic determination of alcohol and for the industrial production of alcohol.

• Journal of Sensor Science and Technology
• /
• v.10 no.3
• /
• pp.173-179
• /
• 2001

The currently used semiconductor pressure sensors are piezoresistive and capacitive type. Especially, semiconductor micro pressure sensors have a great deal of attention because of their small size. However, its fabrication processes are difficult, so that its yield is poor. For the purpose of resolving the drawbacks of the existing silicon pressure sensors, we demonstrate a new type of pressure sensor using PSFET(pressure sensitive field effect transistor) and investigate its operational characteristics. We used PZT(Pb(Zr,Ti)$O_3$) as a pressure sensing material. PZT thin films were deposited on a gate oxide of MOSFET by an rf-magnetron sputtering method. To abtain the stable phase, perovskite structure, furnace annealing technique have been employed in PbO ambient. The sensitivity of the PSFET was 0.38 mV/mmHg.

• The Journal of the Korea Contents Association
• /
• v.12 no.4
• /
• pp.282-291
• /
• 2012

This study investigated the job satisfaction of care worker affect on service quality. It was intended to provide the basic information for enhancing the Job satisfaction and making better quality of service. In order to meet the above purpose, the questionnaire method was applied for the care workers who worked at the 16 home care facilities located in Busan metropolitan city. 250 sheets of questionnaire were distributed and the total of 216 sheets were sampled among the collected questionnaire and analyzed. For data analysis, the statistics package of SPSS/WIN 12.0 was employed to perform reliability test, descriptive statistics analysis, correlation analysis, regression analysis. And the obtained results are as follows: As the result of the regression analysis to find out how care worker's job satisfaction will affect towards the quality of the service, service quality increased as the care worker's job satisfaction rate was higher. For the job satisfaction's sub-variables, it showed high service quality as the satisfaction was increased in the order of task satisfaction level and job safety level.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.5950-5957
• /
• 2012

CPR with minimized hands-off time is one of integral factors for the improvement of the survival rate of patients. The purpose of this study was to examine the relationship of the installation of C-steps on the main stretcher to CPR accuracy and errors. The subjects in this study were 70 paramedics in 10 firehouses in the province of C(35 for control group, 35 for experimental group), and their CPR accuracy on the main stretchers was checked. As a result, it's found that the main stretchers equipped with the C-steps served to boost the accuracy of chest compression by creating suitable environments for that in terms of height and posture(t=65.104, p=.000), to improve the accuracy of artificial respiration by providing a proper amount of ventilation(t=5.207, p=.000), and to bolster the self-confidence of the paramedics about CPR(t=-10.612, p=.000). In conclusion, the mounting of C-steps on the main stretcher is expected to be of use for the improvement of the survival rate of cardiac-arrest patients by ensuring the precise performance of high-quality CPR.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06a
• /
• pp.403-406
• /
• 2011

한국해양연구원에서는 국토해양부의 지원을 받아 2010년 7월부터 새로운 개념의 해저로봇 개발에 착수하였다. 새로이 개발되는 해저로봇은 프로펠러 방식으로 추력을 얻는 기존의 해저로봇과는 달리 여러 개의 관절로 이루어진 6개의 다리를 이용하여 해저면에 근접해서 보행과 유영으로 이동하는 해저로봇으로 강조류와 악시계의 환경에서도 운용이 가능한 로봇이다. 이 해저보행로봇 시스템은 선상시스템과 완충기, 그리고 해저보행로봇으로 구성되며, 이들 사이는 광변환기를 통해서 광케이블로 연결된다. 선상시스템에는 해저로봇의 제어 및 모니터링을 위하여 10대의 컴퓨터가 설치되어 있고, 완충기와 해저로봇에 각각 1대의 입출력 컴퓨터가 내장되어 장착된 센서와 모터의 인터페이스를 담당한다. 본 논문에서는 해저보행로봇의 통신 시스템을 소개하고, 이 통신 시스템에서 사용되기 위하여 설계된 메시지의 통신 프로토콜을 설명한다. 해저보행로봇 시스템의 주 네트워크는 기가비트 이더넷이며, 안정된 통신 환경의 소규모 독립 네트워크이다. 완충기와 해저보행로봇에는 최대 100㎐로 동작하는 다양한 직렬 통신 방식을 갖는 다수의 센서와 모터가 장착되어 있는데, 입출력 컴퓨터가 이더넷 네트워크와의 인터페이스 역할을 수행하여 계층적 네트워크를 구성한다. 로봇 제어에서는 실시간성이 중요하기 때문에 이더넷에서 통신 메시지는 한 번의 전송으로 여러 컴퓨터에 전달할 수 있도록 멀티캐스팅을 사용하여 전송된다. 설계된 통신 프로토콜은 이러한 해저로봇 시스템의 특성에 적합한 간결한 구조로 설계되었으며, 최대 255개의 주소를 지정할 수 있고 255 종류의 메시지 형태를 설정할 수 있다.