• Korean Journal of Heritage: History & Science
• /
• v.42 no.3
• /
• pp.106-130
• /
• 2009

The aim of this paper is analysis of structure and development pattern about wooden coffin and chamber tombs in Gyeongju from the 2nd century B.C. to the 3rd century A.D. for researching to socio-political tendency and growth process of Sarokuk. Tombs buried with iron objects were built in Youngnam(嶺南) from the 2nd century B.C. with spread wooden coffin with stone mound(積石木棺墓). Also medium or small sized wooden coffin tombs buried with bronze mirror of western Han(前漢) and soft stoneware(瓦質土器) were appeared the 2nd century B.C. in Gyeongju, because of establishment of Han's commanderies(漢郡縣) in the Korean Peninsula and refuge from Daedong river(大同江) to Jinhan(辰韓). Separate tombs(獨立墓) with lots of bronze object ware assumed high ranked tombs of parsonage(司祭王) or local chief(地域首長). From the 2nd century A.D. the size of wooden coffin tombs became enlarged and funerary objects ware abundant, for example Sarari 130th tomb(舍羅里 130號). The burying pattern of this tomb is similar to wooden chamber tombs in Lelang(樂浪), which had prestige goods like lacquer ware and bronze mirror in wood box(木匣) beside coffin. Appearance of these wooden chamber tombs that were different from original wooden coffin tombs imply interaction between Lelang and these area with iron. Sarari community that held right of trade and distribution to outside through the geographical advantage grew up centered position in Gyeongju politically, socially, and culturally. Chamber in tomb as a new structural notion that can secure funerary objects became firmly was established from the 2nd century A.D. in Gyeongju and large sized wooden chamber tombs were generally built early of the 3rd century A.D. This tendency was reflected in stratification of community and growth as center of local state. After late of the 3rd century A.D. Gyeongju type wooden chamber tomb(慶州式木槨墓) which had subordinate outer coffin(副槨) was appeared and then subordinate outer coffin was as bigger as main chamber(主槨) the 4th century A.D., because of centralization and stratification in society and unification of various communities among the Gyeongju area.

• Food Industry
• /
• s.181
• /
• pp.10-37
• /
• 2004

식용유지는 식용으로 이용할 수 있는 가시적인 상태의 액상(oil) 또는 고체상(fat)의 식용기름을 말하지만 식품산업 측면에서는 가시적인 상태의 유지(가시지방)뿐만 아니라 유지가공 식품이나 기타의 식품에 함유되어 섭취되는 비가시적인 상태의 유지(비가지 지방)도 포함될 수 있다. 식용유지는 생명을 유지하는데 없어서는 안될 영양소로서 탄수화물 단백질과 함께 3대 영양소 중의 하나이며 1g당 9kcal를 내는 고도로 농축된 에너지원이면서 필수지방산의 공급원이고 비타민 A, D, E 등의 지용성 비타민과 기타 특수한 영양성분의 운반체로서 높은 영양적 가치를 갖는다. 지방성분은 음식물로부터 섭취가 불가능할 경우에는 체내에서 탄수화물이나 단백질을 기질로 하는 대사과정에서 합성되어 지질 또는 필수지방산과 지용성 비타민은 식품으로 지방질과 함께 흡수되어야 하므로 식품의 한 성분으로 지방의 중요성을 인정받고 있다. 1960년대 이후 국민소득의 증가와 함께 식생활도 다양화되고 서구화 간편화되면서 지방 함량이 높은 식품과 유지를 이용한 식품의 소비가 증가하였고 전체적인 유지 소비량도 늘어나는 추세에 있다. 60년대 초에는 총열량 중 지방이 차지하는 비율이 $6\%$ 정도였으나 최근에는 급격히 증가되어 2000년말 현재 $25.5\%$로 증가하였다. 97년까지 계속 증가하던 공급 에너지량은 98년 IMF의 영향으로 2,799 kcal까지 감소했으나 99년 들어 IMF 이전 수준으로 회복되었다. 또한 연간 일인당 순 식용유지류 공급량은 1990년대 까지 급격히 증가하였으나 이후로는 소폭 증가하는 추세이다. 2000년말 현재 식용유지 총 공급량은 76만2 천톤으로써 99년 73만5 천톤에 비해 2.7만톤이 증가하였다. 1998년 IMF 시기를 제외하고는 공급물량은 계속해서 증가 추세이다. 특히 1998년도에 비하여 2000년도에 식물성 유지는 2배 가까이 증가하였으나, 동물성 유지는 절반 이하로 감소되는 추세이며 공급물량으로 보면 대두유, 팜유가 주요 유종으로 식물유지 전체에서 차지하는 비중이 $72.3\%$로 압도적이다. 라면용 튀김기름과 마가린 쇼트닝의 원료로서 대부분 사용되는 팜유를 제외하고 가정용 식용유의 대부분을 차지하는 대두유가 이처럼 식용유지 시장의 대부분을 차지하게 된 이유는 첫째, 90년대 초반 수입 자유화 이후 타 유종 대비 낮은 가격을 형성하여 유지업체가 수입을 늘린 것이고 둘째로는 국내에서 대두유와 대두박을 생산하는 대두가공업체의 안정적 대두유 공급이 주요 원인이라고 할 수 있다. 식용유지의 시장규모는 식품공전상 식용유지로 분류된 제품들의 2000년도 출하액으로 보면 약 6,616 억원 정도이다. 한편 유종이 단순했던 가정용 식용유지 시장이 최근 새로워지고 있다. 주로 조리용으로 사용했던 것에서 건강을 생각하는 품목으로 바뀌는 경향이다. 아직은 가정용에서 대두유가 가장 많지만 옥배유나 채종유 더 나아가 건강이미지의 식용유인 홍화유 올리브유 해바라기유등이 증가하고 있는 추세이다. 한편 기존 식용유가 비만의 원인인 것 때문에 기피되던 것에서 새롭게 다이어트용 식용유 제품이 출시되어 시장에 새 바람이 불고 있다. 일본 식용유지 시장규모는 물량으로 172 만톤, 금액으로는 2,786 억엔(약 2조7860 억원) 수준이다. 지난 10년간 증가율은 물량 측면에서 약 $5\%$정도 신장하고 금액으로는 큰 증감이 없었다. 식용유는 조리의 기초 소재로서 안정한 수요를 갖고 있지만 주요 유종인 샐러드유의 가격이 하락하여, 전체적으로 시장이 물량이 증가하면서도 매출액이 신장하지 못하여 시장규모는 축소되었다고 할 수 있다. 일본 식용유지 업계의 제품동향을 보면 거의 모든 업체가 가정용 시장에서 건강 기능성 식용유지를 출시하고 있다는 점이다. 물론 일본은 건강기능성 식품에 대한 제도적인 뒷 받침이 되어 있어 기능성 식품의 시장출시가 용이한 점이 가정용 시장에 큰 영향을 미쳤다고 볼 수 있다. 유지 산업의 고부가가치화를 위해서는 전통적인 산업의 제품과 기술만으로는 달성하기 어렵다. 국내와 일본 식용유지 업계의 경향을 참고해 볼 때 차별화된 식용유지 제품과 기술의 개발이 절실히 필요하다. 앞서 언급한 고부가가치 제품과 기술 관련 사향을 바탕으로 국내 유지분야가 중점적으로 연구할 분야를 선정해 보면 리파제의 고정화 연구, 생물공학 기술을 활용한 효소의 개발과 이를 이용한 유지 가공 기술 연구, 유지성분의 유화 안정화 기술 연구, 식용유지의 선택적 수소경화 기술 연구 트랜스 지방산 저감기술연구, 효소 반응조 설계기술 연구, 지질 분자구조 분석기술 연구 분야 등이 유망하다. 상기와 같은 연구 분야를 육성하기 위해서는 유지 전문 인력의 육성, 해외 네트웍의 구축, 산학연 공동연구 추진, 국가적 차원의 정책 및 지원 등이 절실하다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.2
• /
• pp.141-148
• /
• 2016

The long-span bridges such as Incheon Bridge and Seohae Grand Bridge are located on the coastal region effected frequently by strong wind of typhoons. In order to ensure the wind-resistant performance of the structure, estimation of the proper design wind speed is very important. In this study, stochastic estimation of design wind speed incurred by typhoons is carried out. For this purpose, we first established probability distribution of climatological parameters such as central pressure depth, distance of closest approach, translation speed and heading to build statistical model of typhoons, which are employed in Monte Carlo simulation for hypothetical typhoons. Once a typhoon is generated with statistically justified parameters, wind speeds are estimated along its path using wind field model. Thousands of typhoons are generated and their peak wind speeds are utilized to establish the extreme wind speeds for different return period. The results are compared with design basic wind speeds in Korean Highway Bridge Design Code, showing that the present results agree well with similar studies while the existing code suggests higher design wind speed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.1
• /
• pp.31-38
• /
• 2018

Earthquake disasters that exceed the design criteria can pose significant threats to nuclear facilities. Seismic probabilistic safety assessment(PSA) is a probabilistic way to quantify such risks. Accordingly, seismic PSA has been applied to domestic and overseas nuclear power plants, and the safety of nuclear power plants was evaluated and prepared against earthquake hazards. However, there were few examples where seismic PSA was applied in case of a research reactor with a relatively small size compared to nuclear power plants. Therefore, in this study, seismic PSA technique was applied to actually completed research reactor to analyze its safety. Also, based on these results, the optimization study on the seismic capacity of the system constituting the research reactor was carried out. As a result, the possibility of damage to the core caused by the earthquake hazard was quantified in the research reactor and its safety was confirmed. The optimization study showed that the optimal seismic capacity distribution was obtained to ensure maximum safety at a low cost compared with the current design. These results, in the future, can expect to be used as a quantitative indicator to effectively improve the safety of the research reactor with respect to earthquakes.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.2
• /
• pp.1-8
• /
• 2012

This paper presents the accelerometer which is a key component of TPMS(Tire Pressure Monitoring System). Generally a piezoresistive accelerometer has characteristics of lower cost, better linearity and better immunity about the environmnet noise than a capacitive one. Three types of piezoresistive accelerometers are degined and simulated using ANSYS program. The best one is a piezoresistive sensor which is supported by four beams located at the center of the edge of the mass after comparing the characteristics of resonant frequency of the three types. Considering the sensor size and a simulated maximum stress and maximum displacement, the length of beams is set as $200{\mu}m$. The size of a piezoresistive accelerometer is $3.0mm{\times}3.0mm{\times}0.4mm$. The sensor output is characterized by measuring the output characteristic depending on angle. As a result the offset voltage of the accelerometer is 43.2 mV and its sensitivity is $42.5{\mu}V/V/g$. The temperature bias drift is measured. The shock durability of the sensor is 1500g and the measuring range is 0 ~ 60 g.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.4
• /
• pp.151-165
• /
• 2019

In this study, the four types of improvement methods (increase self weight and reducing sliding force etc.) were proposed depending on install location with compaction grouting to improve seismic performance of existing port structure and optimal methods by analyzing the effects of improvement (stability, constructability and economy) by theoretical and numerical methods. From the dynamic time history analysis for artificial seismic waves, the results indicated that the horizontal displacement after improvement decreased compared to before improvement, however the displacement reduction effect among improvement methods was not significantly different. Slope stability based on the strength reduction method and the limit equilibrium analysis method, it is confirmed that the passive pile method is more safe than other methods. It is due to the shear strength at the failure surface is increased. In addition, the analysis of constructability and economy showed that the reduction of earth pressure method (type 02) and the passive pile method (type 03) are excellent. However, in the case of the passive pile method is concerned that there is a shortage of design cases and the efficiency can be reduced depend on various constraints such as ground conditions.

• Journal of the Korea Concrete Institute
• /
• v.19 no.5
• /
• pp.557-567
• /
• 2007

In underground parking lots of apartment housing, the story height is increased by $300{\sim}400mm$ because of various ducts for HVAC. In order to reduce this story height, this study proposed the 'hybrid beam', which is composed of PC beam with embedded steel beam and insitu concrete. The depth of the hybrid beam is reduced by 300 mm and then the steel beam is embedded over the length of reduced depth to compensate for the loss of strength. Then, we performed the large-scale structural tests on 9 specimens and investigated the flexural behavior of the specimens. The parameters of tests were the shape of steel beam section, the length of the reduced depth, the stage of construction, the effects of slab and shear connectors. The test results showed that the specimens, after the insitu concrete has cured, has the flexural capacity which exceeds the required design capacity regardless of other parameters. On the other hand, the specimens of construction stage do not have sufficient strength. Based on these results, it is thought that the proposed hybrid beam with reduced depth is applicable to the underground parking lots of apartment housing as long as the support is placed at construction stage.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1249-1256
• /
• 2019

In this paper, we propose a new algorithm to remove acoustic feedback and noise in hearing aids. Instead of using the conventional FIR structure, this algorithm is a deep learning algorithm using neural network adaptive prediction filter to improve the feedback and noise reduction performance. The feedback canceller first removes the feedback signal from the microphone signal and then removes the noise using the Wiener filter technique. Noise elimination is to estimate the speech from the speech signal containing noise using the linear prediction model according to the periodicity of the speech signal. In order to ensure stable convergence of two adaptive systems in a loop, coefficient updates of the feedback canceller and noise canceller are separated and converged using the residual error signal generated after the cancellation. In order to verify the performance of the feedback and noise canceller proposed in this study, a simulation program was written and simulated. Experimental results show that the proposed deep learning algorithm improves the signal to feedback ratio(: SFR) of about 10 dB in the feedback canceller and the signal to noise ratio enhancement(: SNRE) of about 3 dB in the noise canceller than the conventional FIR structure.

• Environmental and Resource Economics Review
• /
• v.15 no.2
• /
• pp.201-245
• /
• 2006

We applied general equilibrium model to analysis the economic impact of international emission trading by sector and the efficiency of the Convention to study whether Climate Change Convention satisfy the efficiency. We divided the world as 4 groups : USA, OECD members w/o USA (OEC), Former Soviet Union (FSU) and Developing countries (DEV). Compared to no trading, global trading would accomplish the same environmental effect with less cost as much as 97.8 billion$, which is the surplus of trading. However, half of it is taken by USA and 20% by OEC. FSU and DEV have only 18% and 10%. This result suggest the two things. First, the emission trading is effective as far as the participation of developing countries are guaranteed. If they do not take part in the coalition and emit the leakage, it may threaten the stability of the international trading coalition. Second, we found the logical ground of the side payment for developing countries. The permit buying countries take more share of the surplus under the emission trading, while the energy sector of developing countries shrinks to sell permits, which may adversely affect to economic growth of the countries. Therefore, the Annex-I countries need to provide side payment to lead the participation of the developing countries.

• Journal of Conservation Science
• /
• v.36 no.2
• /
• pp.123-142
• /
• 2020

We attempted an experimental study of lost-wax casting to reconstruct the Gilt-bronze pensive Bodhisattva; The main object we aimed to reconstruct was the Korean national treasure No.83, Gilt-bronze pensive Bodhisattva(Maitreya); thus, we scientifically analyzed and measured the alloy ratio and casting method. Initially, the alloy ratio we used during the preliminary experiment was Cu:Sn:Pb = 95.5:4.0:0.5; we then increased tin and lead by 2.5% to consider vaporization during the main experiment. After applying lost-wax casting, we realized that 30% rosin contributed to proper hardness after the wax hardness experiment. The microstructure revealed normal casting character(α-Cu, δ), and the results of the chemical analysis are identical to those of previous studies. The analysis of the mold suggests the presence of quartz powder for structural stability and fire-resistance along with other organic materials whose contribution is still unknown. We expect that our research will serve to provide basic data for advanced studies in the future.