• Journal of the Korean Magnetics Society
• /
• v.3 no.1
• /
• pp.23-28
• /
• 1993

Thin films of soft magnetic Fe-Hf-C alloys with nanoscale crystallites were investigated in this study. The films were fabricated by an RF diode magnetron sputtering apparatus and subsequently annealed in vacuum. The soft magnetic properties of the films were observed to differ depending on the different substrates such as Corning 7059, $CaTiO_3$ and $Al_2O_3-TiC$ with various underlayer(Cr, $SiO_2$) thickness. This results may be due to the interdiffusion between the substrate and the magnetic layer and/or between the underlayer and the magnetic layer, rather than the microstructural change such as grain size. The Fe-Hf-C films with high permeability up to 4000(at 1 MHz) and saturation magnetization up to 16 kG were obtained in the vicinity of phase boundary between the crystalline and amorphous state when the size of ${\alpha}-Fe$ grains is about 5 nm. And also the films were found to have thermal stability up to $600^{\circ}C$.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.3
• /
• pp.357-365
• /
• 2011

The current trends in steel construction intend to use tapered sections to minimize as much as possible the use of excess material. This can be done by choosing the cross-sections to be as economical as possible, leaving the classical approach of using prismatic members. In addition, it is important to predict the buckling behavior of tapered member with large depth-to-thickness ratio in order to prevent the collapse of PEB system subjected to overloads. An experimental investigation of buckling behavior of tapered beam was presented. The primary test parameter was depth-to-thickness ratio and taper ratio. Using initial stiffness and load-carrying capacity proposed by current provision, the simple plastic hinge method using modified Yoda's model and finite element analysis, the prediction of a moment-rotation curve of linearly tapered member was presented. Moreover, comparisons between analytical and experimental data for moment-rotation curves were accomplished.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.4
• /
• pp.51-65
• /
• 2011

Shear banding, the localization of deformation into thin zones, has a quite practical relevance, as stability and deformation characteristics of earth structures are controlled by the soil behavior within the shear band. In this study, for understanding occurrence and developed pattern of shear band, plane strain compression tests were performed on three soils with different particle-size distribution under various conditions. Digital images were captured during the experiments; then, deformation of a specimen was evaluated by digital image analysis technique. The characteristics of a shear band were evaluated from the state shortly after post-peak occurrence to critical state. Additionally, the statistical procedure was developed to determine the reasonable thickness of a shear band.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.3
• /
• pp.171-178
• /
• 2008

Pressure control of hydraulic pump using SRM with pressure predictor and direct torque control method is presented in this paper. Nowadays, high efficiency and high performance motor drive is much interested in hydraulic pump system. But the hydraulic pump system has an inherent defect that its dynamic behavior causes by interaction between the sensor and hydraulic load. It will make low performance of whole system, even unstable and oscillatory. Proposed system integrates pressure predictor and direct instantaneous torque control (DITC). The pressure predictor includes Smith predictor, which is easy to improve unstable or long oscillation in traditional negative feedback control and popular PID control architectures. And DITC method can reduce inherent torque ripple of SRM, and develop smooth torque to load, which can increase stability and improve the torque response of SR drive. So high dynamic performance and stabilization can achieved proposed hydraulic system. At last, the proposed hydraulic system is verified by simulation and experimental results.

• The Journal of the Korea Contents Association
• /
• v.14 no.10
• /
• pp.270-278
• /
• 2014

The stability and security management of IT data becomes more important because information security threats increases rapidly in Big Data era. The operational policy of the data backup considering information security threats is required because the backup policy is the fundamental method that prevents the damage of security threats. We present an economic approach for a data backup system with information security threats which damage the system. The backup operation consists of the differential backup and the batch backup. We present a stochastic model considering the occurrence of information security threats and their damage. We analyze the stochastic model to derive the performance measures for the cost analysis. Finally we analyze the average cost of the system and give numerical examples.

• Journal of IKEEE
• /
• v.11 no.4
• /
• pp.257-264
• /
• 2007

The MM22 microtron has used as a cancer therapy machine from Nov. 1986 to Feb. 2006. This machine was moved and installed to a radiation research center to use as an education and research tool from treatment machine because of aging of MM22 microtron. In this paper, for extracting the electron beam from microtron, operation principle of the microtron, system characteristics of each module, and pulse structures were reviewed. The beam extraction and measurement were performed after measuring pulses of each major module and extraction trials in the beam line. After finishing the movement of MM22 microtron, the 30mA target current in the case of 10 MV X-ray beam was extracted and the beam flatness of radiation distribution was acquired within 3% error ratio after 100 MU was irradiated on X-omatV Film at SSD 100 cm and field size $10{\times}10cm^2$. As a result, the microtron movement and new installation was performed with success.

• Food preservation and processing industry
• /
• v.1 no.1
• /
• pp.5-16
• /
• 2002

쌀은 중국에서 중요한 식량작물로 제9차 5개년 계획(1966-2000년) 동안 재배면적 31.4백만 ha이며 생산량은 단위 ha당 6,303kg으로 198백만톤에 이르며 이는 재배면적으로는 식량작물의 $27.7\%$, 그리고 생산량으로는 전체식량작물의 $40\%$를 각각 점하고 있다. 이러한 재배면적과 생산량은 각각 세계전체 면적과 생산량의 $20.7\%$와 $33.7\%$를 차지하는 많은 량이다. 중국의 남부지역은 전지역의 $73.5\%$가 이모작으로 재배되며 주품종은 Indica이다. 중국의 중부지역은 이모작과 일모작의 재배형태가 2:3으로 공존하고 있으며 양쯔강 이북은 주로 일모작의 형태이다. 중국의 쌀 재배면적은 1960년대 이후 점차 증가하다가 1980년대 후반부터 정체되었다가 최근 90년대 말에 이르러서는 재배면적의 감소가 가속화되고 있으나 단보당 생산량은 꾸준히 증가하고 있다. 2001년 중국의 쌀 소비량은 138백만톤으로 이의 $85.2\%$는 식량용으로, $5.8\%$는 사료용으로, $1.3\%$는 가공용, $1.5-2.0\%$는 수출용으로 그리고 $1.2\%$는 종자용으로 소비되었다. WTO체제에 들어서도 중국의 쌀 생산에는 크게 영향을 받지 않을 것으로 여겨지는데 그 이유로는 충분한 생산능력과 자급률, 쌀의 낮은($4\%$) 국제교역비율, 총생산량에 대한 낮은 쿼터비율 등을 들 수 있다. 그러나 WTO체제 가입에 따른 압력 또한 존재하는 것이 사실인데 그것은 낮은 품질, 국제가격보다 높은 국내가격 등을 들 수 있다. 향후 중국 쌀의 발전적 전략들로는 쌀의 안정적 발전을 지속하는 일, 쌀 재배구조 조정과 함께 높은 미질을 가지는 품종육종, 기계화를 비롯한 경작기술의 발달, 쌀과 부산물 가공기술의 개발연구, 특정기능을 함유하는 유전공학적 기술의 적용, 토지와 도시화 그리고 식량순환에 시스템의 개혁 등 과학기술을 고양하는 일 등을 들 수 있다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.2
• /
• pp.387-396
• /
• 2015

The existing shield tunnel has constructed in the concept of non-drainage uniformly, but the leak has become a problem in the construction and management. The Shield tunnel design allowed for the water and earth pressure bring about the increasing segment thickness and the construction costs. In order to improve these problems, the study of the partial drainage shield tunnel is in progress. In this study, th model experiment was performed to confirm the possibility of the partial drainage shield tunnel. And the water and earth pressure was measured in drainage and undrained condition. Based on the results of model experiments, the effect of water pressure reduction was confirmed by reviewed the structure stability of the real design case.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.8
• /
• pp.849-855
• /
• 2014

The GFRP composite is used for hot press flow molding of automotive components, and the different flow rates of fiber and plastic are likely to induce fiber orientation and inhomogeneity in the material. However, very limited systematic research studies are available on composite materials with superior flow homogeneity and optimized fiber orientation. The inhomogeneity and fiber orientation issues of GFRP composites have still not been resolved through research. The plain weaving method applied to the GFRP prepreg can improve its recyclability, inhomogeneity, fiber flow, structural stability, fiber deformation, surface smoothness, degree of impregnation, and other mechanical properties. The need for more detailed and thorough studies is evidenced.

• Journal of Korea Multimedia Society
• /
• v.5 no.2
• /
• pp.215-221
• /
• 2002

In high speed optical disc devices, the vibration caused by unbalanced displacement leads the focus and tracking servo systems to be unstable, and increases the data search time. In this paper, we propose a new scheme to solve the unbalanced displacement problem. The proposed method detects the unbalanced rate by differential amplifying optical power received at photo diode and converts it into an electrical signal. controlling the speed of spindle motor, according to the detected unbalanced rate, makes it possible to improve the performance of tracking and data searching tasks. Also, we analyze the dynamic characteristics of focus and tracking servo systems in high speed mode and provide the firmware and hardware architecture that the proposed method can be installed as an add-on- module in the existing system.