• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.679-679
• /
• 2013

태양전지는 계속되는 유가상승과 무소음 무공해의 녹색에너지원이라는 점에서 각광받고 있다. 더욱이 발전단가가 높기 때문에 특히 저가의 다결정 실리콘 태양전지의 연구가 활발히 진행되고 있다. 태양전지의 texturing 공정은 광 포획 효과를 극대화 시킨다. 이에 따라 웨이퍼 표면에 텍스쳐를 형성하여, 광학적 손실을 줄이는데, 일반적으로 alkaline etching (WET) 공정과 reactive ion etching (RIE) 공정이 사용된다. 본 연구에서는 RIE, WET 공정을 사용하여 만든 texturing 구조의 태양전지를 모듈 공정 진행 전 특성평가를 한 후 다시 모듈 공정 후 특성평가를 진행하였다. 특성평가는 태양전지의 전류-전압 곡선을 통해 개방전압, 단락전류, 곡선인자 을 측정하고, 파장에 따른 양자효율 및 반사율을 측정하였다. 또한 태양전지의 전기에너지를 가하여 생성되는 전계발광 현상과 NIR camera를 이용하여 Grain의 Dark Area 및 Micro crack을 검출하였다. 이와 같은 모듈 공정 전/후 특성을 측정하고, 이를 비교 분석하여 BIPV 적용 시 태양전지의 동작특성을 확인하였다.

• Journal of Energy Engineering
• /
• v.21 no.4
• /
• pp.356-361
• /
• 2012

Recently, even though the researches on renewable energy like geothermal, wind, solar energy have been performed widely, its use-rate in total energy is still low. This study was carried out to investigate the performance of hybrid heating system, which consisted of solar collector of thermosyphon tube type and X-L pipe boiler. Especially, new type of solar collector was tried and compared with double tube type and, futhermore, performance and safety on X-L pipe boiler were investigated. As the results, efficiency of solar collector of thermosyphon tube type was higher 20.7% than that of double tube type, mainly due to its structural characteristics. It was also confirmed that temperature of special heat medium used X-L pipe boiler rose up about 20% rapidly in comparison with that of pure water.

• The Journal of Engineering Geology
• /
• v.30 no.3
• /
• pp.279-288
• /
• 2020

Sand dams are formed by installing beams across rivers and filling the secured space with water and a permeable material, such as sand, which stores the water in available pore space. These structures have mainly been reported in Kenya, Africa. This study proposes a sand dam design that improves structural safety and water intake. First, to increase the stability of the concrete wall of the dam, steel barbed wire connections are proposed for construction. Second, by using geotextile fabrics, evaporation may be reduced from 45% to 8%, and horizontal permeable discharge could be reduced markedly, therefore improving water storage capabilities. In addition, the water intake increased by ~2.4 times that of the previous design. Third, filtration efficiency is improved by selecting a sedimentary site for improved water quality. Finally, the installation of a tensiometer is suggested for monitoring the sand dam.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.7
• /
• pp.66-79
• /
• 1999

We investigate the effects of high input power on the performance of optical bistable symmetric self-electooptic effect devices (S-SEEDs) using extremely shallow quantum wells (ESQWs). In this study, we consider the four ESQWs SEEDs; anti-reflection (AR)-coated ESQWs S-SEED, back-to-back AR coated ESQWs S-SEED, asymmetric F뮤교-Perot (AFP) ESQWs S-SEED, and back-to-back AFP-ESQWs S-SEED. As the input power increases, device performances such as on/off contrast ratio, on/off reflectivity difference are seriously degraded because of ohmic heating and exciton saturation. On the other hand, switching speed of the device increases up to certain value and then begins to decrease. With reasonable optimization of the input power for the best switching speed operation of the devices in a cascading optical interconnection system, we simulate and analyze the system bit-rate of the various ESQWs S-SEEDs, for a mesa of $5{\times}5{\mu}m^2$ size, changing the namber of quantum wells for the external bias of 0 V and -5V.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.3
• /
• pp.267-275
• /
• 2009

This paper presents the p-convergent coupling element on the basis of the ESSE(equivalent single layer shell element) and the PLLE(partial-linear layerwise element) to analyze laminated composite plates. The ESSE is formulated by the degenerated shell theory, on the other hand, the assumption of the PLLE is piecewise linear variation of the in-plane displacement and a constant value of lateral displacement across the thickness. The proposed finite element model is based on p-convergence approach. The integrals of Legendre polynomials and Gauss-Lobatto technique are chosen to interpolate displacement fields and to implement numerical quadrature, respectively. This study has been focused on the verification of p-convergent element. For this purpose, various finite element multiple models associated with the combination of ESSE and PLLE elements are tested to show numerical stability. The simple examples such as a cantilever beam subjected vertical load and a plate with tension are adopted to evaluate the performance of proposed element.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.6
• /
• pp.403-414
• /
• 2016

Recently according to the decreasing of steel price and increasing of labor cost the various studies of steel structure and composite structure are proceeding. This study developed the new shape of high depth hybid forming composite beam and performed the bending test to evaluate the bending performance by creating 10 specimens. Bending test result showed that capacity of the beam was increased stably. The ratio of the nominal load to the maximum load($P_u/P_n$) is 1.19 and the deformation capacity(${\delta}_{0.8P_u}/{\delta}_y$) is 3.9~4.5. Also, it is possible to apply the existing evaluation equation(KBC 2009) of composite beam.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.4
• /
• pp.358-369
• /
• 1995

Surface structure and adhesion by the reaction between thin metal films and SiC were studied at temperatures between 550 and $1450^{\circ}C$ for various times. The reaction with the formation of various silicides was initially observed above $850^{\circ}C$ for SiC/Co system and $650^{\circ}C$ for SiC/Ni system. The cobalt reacted with SiC and consumed completely at $1050^{\circ}C$ for 0.5 h and the nickel at $950^{\circ}C$ for 2 h. The observed CoSi phase in SiC/Co and Ni$_2$Si phase in SiC/Ni are thermodynamically stable in the reaction zone up to 125$0^{\circ}C$ and $1050^{\circ}C$ respectively. Carbon was crystallized as graphite above $1450^{\circ}C$ for SiC/Co reaction surface and $1250^{\circ}C$ for SiC/Ni. The critical loads of the thin metal films on SiC substrate were qualitatively compared in terms of the scratch test method. At temperatures between 850 and $1050^{\circ}C$, relatively higher values of 20~33 N were observed for SiC/Ni couples.

• Korean journal of communication and information
• /
• v.51
• /
• pp.65-86
• /
• 2010

This paper reviews the problems and opportunities of Japanese newspaper industry. In the focus are particularly issues related to causes of the crisis and reacting strategies overcoming the crisis. To answer the questions, we conducted in-depth interviews with top-level managers of major newspaper companies in Japan. Secondary data were gathered to complement the interview. Top managers mainly perceived the causes of the crisis as young readers' alienation from newspaper due to the change of media environment and structural factors such as increasing production/distribution costs and diminishing appeals for advertisers. They are implementing several strategies to overcome this crisis - developing newspaper content for young readers; packaging customized on-off line advertisement; extending news distribution via online and mobile platforms; diversifying business into diverse sectors such as real-estate; enhancing brand equity of newspaper; and collaborating with rival newspaper companies in operating news site and joint printing/distribution. Lessons from the case of Japanese newspaper industry may be useful starting points for the Korean newspaper companies agonizing for diminishing circulation and advertising revenues.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.5
• /
• pp.35-45
• /
• 2011

Establishing housing supply strategies in Korean housing market is a crucial issue due to contradictory but concurrent two problems in market; one is the unstable working-class residential and the other is the high vacancy rate by the low-level of sales rate. Although government has been continuously implementing various supply policies in an attempt to evenly distribute houses as well as to keep supply and demand in balance, it is difficult to satisfy all of stakeholders, such as housing consumers, housing owners and housing suppliers. This paper, therefore, applies a system dynamics methodology and offers a dynamic and integrated model encompassing for-profit behaviors of each market participants. The proposed model simulates the future trends of house prices, the balances between supply and demand, construction companies earnings and vacancy rate when applying various housing supply scenarios. From the simulation result, recent governmental small-size rental housing supplies in bulks should utilize private construction companies to stabilize housing distribution rate and private supply system as well as the supply and demand are well balanced.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.6
• /
• pp.22-30
• /
• 2011

In the construction operation, foundation work should be done in advance for the building structure to be installed. This foundation work include a number of activities such as excavation, ground water prevention, piling, wale installation, etc. Caution should be taken in the operation because the dynamics of earth movement can cause a significant failure in the temporary structure. The temporary structure, therefore, should be constantly monitored to understand its behavior. This paper introduces the USN-based monitoring system to automatically identify the behavior of the temporary structure in addition to visual inspection. The autonomous capability of the monitoring system can increase the safety in the construction operation by providing the detailed structural changes of temporary structures.