• Explosives and Blasting
• /
• v.40 no.4
• /
• pp.15-26
• /
• 2022

With the recent increase in old and dangerous buildings, the demand for technology in the field of structure demolition is rapidly increasing. In particular, in the case of structures with severe deformation of damage, there is a risk of deterioration in stability and disaster due to changes in the load distribution characteristics in the structure, so rapid structure demolition technology that can be efficiently dismantled in a short period of time is drawing attention. However, structural deformation such as unauthorized extension or illegal remodeling occurs frequently in many old structures, which is not reflected in structural information such as building drawings, and acts as an obstacle in the demolition design process. In this study, as an effective way to overcome the discrepancy between the structural information of old structures and the actual structure, access to actual structures through 3D modeling was considered. 3D point cloud data inside and outside the building were obtained through LiDAR and drone photography for buildings scheduled to be blasting demolition, and precision matching between the two spatial data groups was performed using an open-source based spatial information construction system. The 3D structure model was completed by importing point cloud data matched with 3D modeling software to create structural drawings for each layer and forming each member along the structure slab, pillar, beam, and ceiling boundary. In addition, the modeling technique proposed in this study was verified by comparing it with the actual measurement value for selected structure member.

• The Journal of the Korea Contents Association
• /
• v.18 no.5
• /
• pp.34-45
• /
• 2018

In Korea, there are a lot of regulation on gambling industry. Among them, the most unique regulation is the CAP system. The purpose of CAP system is to minimize the social side effects of gambling industry. For that, National Gambling Control Commission controls the maximum number of business premises of gambling companies. The CAP system is a means of preventing excessive expansion of the gambling industry. The CAP system has lasted since 2009. This study investigate how the CAP system influence the structure of gambling industry. In result, after the CAP system carried out, the growth rates of gambling industry are similar to those of national GDP. And before the CAP system, the HHI index and CR index were decreasing trend. However, after the CAP system, the HHI index and CR index were not decreasing. That means the structure of gambling industry has been stable and settled. And there were few variation among the gambling companies in sales. In conclution, the CAP system influenced the gambling industry to be stable. There were few competition among the gambling companies in Korea. And the structure of gambling industry has been settled.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.1
• /
• pp.13-22
• /
• 2001

This paper presents three dimensional structure of RF packages and the improvement effect of its electrical characteristics when implementing RF transceivers. We divided RF modules into several subunits following each subunit function based on the partitioning algorithm which suggests a method of three dimension stacking interconnection, PAA(pad area array) interconnection and stacking of three dimensional RF package structures. 224MHz ITS(Intelligent Transportation System) RF module subdivided into subunits of functional blocks of a receiver(RX), a transmitter(TX), a phase locked loop(PLL) and power(PWR) unit, simultaneously meeting the requirements of impedance characteristic and system stability. Each sub­functional unit has its own frequency region of 224MHz, 21.4MHz, and 450KHz~DC. The signal gain of receiver and transmitter unit showed 18.9㏈, 23.9㏈. PLL and PWR modules also provided stable phase locking, constant voltages which agree with design specifications and maximize their characteristics. The RF module of three dimension stacking structure showed $48cm^3$, 76.9％ reduction in volume and 4.8cm, 28.4％ in net length, 41.8$^{\circ}C$, 37% in maximum operating temperature, respectively. We have found that three dimensional PAA package structure is able to produce high speed, high density, low power characteristics and to improve its functional characteristics by subdividing RF modules according to the subunit function and the operating frequency, and the features of physical volume, electrical characteristics, and thermal conditions compared to two dimensional RF circuit modules.

• Journal of the Korean Magnetics Society
• /
• v.16 no.4
• /
• pp.193-196
• /
• 2006

The magnetic properties of Ni nanowires consisting of one to four atoms are investigated by mean of ab initio spin-polarized density functional calculations. Stability of zigzag-square $Ni_4$ nanowire is larger than $Ni_4$ nanowires with square. The magnetic moment of linear $Ni_1$ is $1.34{\mu_B}/atom$, which is the largest magnitude among moments of five Ni nanowires. The magnetic moment of Ninanowires show to be decreased by increasing the number of atoms in unit cell. The smallest moment is $0.91 {\mu_B}/atom$ for square $Ni_4$ nanowire. The spin polarization of zigzag-square $Ni_4$ nanowire is 32% higher than that of fcc bulk Ni.

• Journal of the Korean Chemical Society
• /
• v.40 no.8
• /
• pp.557-564
• /
• 1996

FAB CAD MS/MS(Fast Atom Bombardment Collision Activated Dissociation Mass Spectrometry/Mass Spectrometry) was used to study different degree of bond stability according to the linkage positions of alkali cationized $(Na^+, Li^+, K^+, NH_4^+)$ stereoisomeric and synthetic oligosaccharides. The alkali metal cations were much more stable, requiring over -40 eV of collision energy vs. only -10 eV for the protonated forms. Of the cations, the potassium cationized trisaccharides were more stable than the others. They would not yield fragment ions under the conditions of collision available in triple quadrupole. Other cationized species exhibited decreasing stability in the series $Nap^+>Li^+>NH_4^+$ using 0.8 mTorr argon pressure in the collision cell. Metal cations of the oligosaccharides maintained charge principally on the amino sugar as shown by shift of all the fragment ions containing the amino sugar. The reason for the higher stability of the metal cationized form is the formation of crown ether-like bond around metal cations, N-acetyl group on GlcNAc and oxygens on fucose moiety. Depending on the metal sizes and the conformation of linkage-isomeric region, cationized species gave linkage dependent fragment patterns and exhibited stability in the series 1-6 > 1-4 > 1-3 linkage.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.47.1-47.1
• /
• 2010

Mg합금은 모든 구조용 재료 중에서 비강도가 크며 가공성이 가장 우수하여 재료의 실제 적용시에 2차 가공비 측면에서 다른 경량재료에 비해 유리하다. 그래서 경량화를 필요로 하는 최근 산업체의 요구를 충족시킬 수 있는 재료이다. 그러나 마그네슘 합금의 적용이 매우 제한되는 이유는 결정구조가 hcp로서 냉간가공이 어렵고, 강화기구가 석출경화 및 고용강화로 제한되기 때문에 기계적 성질, 즉 강도와 연성이 모두 낮다. 특히 고온에서 기계적 성질이 급격히 저하되기 때문에 구조용 재료로써는 사용이 어렵다. 따라서, 본 연구에서는 고온에서 안정한 MgZn상과 항복강도를 향상시키는 Mg4Ag상의 석출을 보이는 Mg-Zn-Mn-Ag합금의 시효거동 및 미세조직 변화에 대해 검토하고자 하였다. 본 합금의 석출거동, 미세조직 및 경도 변화에 미치는 시효처리의 영향에 관한 연구를 수행하기 위해 Pandat Program을 이용해 열역학적 계산을 통한 상태도 해석 및 석출상을 예측 하였다. 계산된 결과는 DSC실험을 통해 비교 분석함으로써 신뢰성을 확보하였고 미세조직 및 석출상 분석을 위해 OM, SEM 그리고 XRD로 관찰하였다. 또한, 시효처리에 따른 기계적 특성을 분석하기 위해 상온 및 고온 인장시험을 하였고, 인장시험 후 파단면 분석을 통하여 재료의 파괴거동을 분석하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.43-43
• /
• 2011

BN(Boron Nitride)은 온도와 압력 조건에 따라 안정한 상이 sp3 결합인 cubic 구조의 BN(cBN)과 sp2 결합인 hexagonal 구조의 BN(hBN or tBN)으로 나뉘는데, 이 중 cBN은 우수한 기계적, 물리적, 화학적 특성으로 인해 박막 분야에서 매우 높은 응용가능성을 지니고 있다. 하지만 cBN 박막의 합성과정에서의 필수적인 요소인 높은 압축잔류응력은 cBN을 응용분야에 적용하는데 있어 한계점으로 계속 남아 있었다. 그동안 이러한 잔류응력을 감소시키기 위해 열처리, 이온 주입, 제 3의 물질 첨가 등 다양한 관점에서 접근한 연구들이 진행되어 왔다. 본 연구에서는 cBN 합성과정에서 잔류응력을 감소시키기 위한 방법으로 수소를 첨가하였고, 그에 따른 잔류응력의 변화를 분석하고, 그 과정에서 잔류응력의 형성에 수소가 어떤 역할을 하는지 규명하고자 하였다. cBN 박막은 hBN을 target으로한 unbalanced magnetron sputtering를 사용하여, 실리콘 wafer 위에 합성하였다. 증착압력은 1.3mTorr로, 수소의 첨가량을 증가시키며 잔류응력과 cBN fraction을 관찰하였다. cBN fraction은 FTIR로 분석하였고, 잔류응력은 실리콘 strip의 in-situ 곡률측정법으로 계산하였다. cBN 박막의 조성과 구조 분석, 수소의 역할 규명을 위해 RBS 및 HRTEM을 이용하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4A
• /
• pp.371-376
• /
• 2010

This paper presents an efficient demapper architecture based soft-decision using the phase-section for Digital Video Broadcasting via satellite, Second Generation (DVB-S2). To achieve the satisfactory performance under a very low SNR conditions with the efficient hardware resource utilization, we propose a simple soft-decision demapper architecture using comparators to compare the phase of symbols and memories. The proposed architecture can decrease about 81% of the hardware resource, satisfying the BER requirements of DVB-S2. It has been thoroughly verified with an FPGA board and R&S(R)SFU (Rohde&Schwarz SFU-K108) broadcaast test equipment.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.3
• /
• pp.97-105
• /
• 2006

Our middle manufacturing industry need a master data management solution to adjust the changing industry environment effectively. In this paper, we development the master data management solution which has an user interface to use conveniently and has a standard data architecture for the efficient connection among various systems. Also this solution composed of the automated connection module which can make an intermediate language based on the standard data architecture and composed of the extensible production data management to improve the extensibility. This solution can provide an efficient progress information of work which was not managed by officer until now as well as can provide stable system building when we want to extend the system.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.71-71
• /
• 2011

ZnO 반도체가 넓은 에너지띠와 큰 엑시톤 결합에너지를 가지기 때문에 가진 투명 전극, 태양전지, 발광소자 및 메모리와 같은 다양한 전자 및 광전자 소자의 응용에 대한 많은 연구가 활발히 진행되고 있다. 본 논문에서는 절연성 고분자인 폴리스티렌 박막에 분산되어 있는 ZnO 나노 입자를 기억 매체로 사용하는 write-once-read-many times (WORM) 메모리 소자를 제작하고 전기적 성질과 안정성에 대하여 관찰하였다. 화학적 방법으로 형성한 ZnO 나노입자와 폴리스티렌을 N,N-dimethylformamide 용매에 녹인 후 초음파 교반기를 사용하여 나노 복합 소재를 형성하였다. 하부 전극으로 indium-tin-oxide가 증착되어 있는 유리 기판 위에 나노 복합 소재를 스핀코팅 방법으로 도포한 후 열을 가해 잔류 용매를 제거하였다. ZnO 나노입자가 분산되어 있는 폴리스티렌 나노 복합 소재로 구성된 박막위에 상부 전극으로 Al을 열증착하여 메모리 소자를 제작하였다. 전류-전압 측정 결과에서 저전압에서는 전도도가 낮은 OFF 상태를 유지하다 약 1.5 V에서 전도도가 갑자기 증가하여 높은 전도도의 ON 상태로 전이되는 쌍안정성이 관찰되었다. 전류의 ON/OFF 비율은 약 103이며 ON 상태에서 OFF 상태로 전환되지 않는 전형적인 WORM 메모리 소자의 전류-전압 특성을 나타났다. 두 전극 사이에 폴리스티렌 박막으로만 제작된 소자를 제작하여 전류-전압 측정을 하였으나 메모리 특성이 나타나지 않았다. 그러므로 WORM 메모리 특성은 폴리스티렌 박막안의 ZnO 나노입자에 기인함을 알 수 있었다. 제작된 소자에 대해 기억 시간 측정 결과는 ON과 OFF 상태의 전류가 장시간에도 변화가 거의 없는 소자의 안정성을 보여주었다. 이 실험 결과는 ZnO 나노입자가 분산된 폴리스티렌 나노 복합 구조체를 사용하여 안정성을 가진 WORM 메모리 소자를 제작할 수 있음을 보여주고 있다.