• Journal of Korea Water Resources Association
• /
• v.41 no.10
• /
• pp.983-993
• /
• 2008

In recent times, sea level increasing caused by abnormal weather and global warming, sea-sand dredging and complex development causes various kind of erosion damages onto the coastal area in the world. The various types of erosion control and protection methods are applied but there are no signs of fruitful effectiveness. The PC concrete protection block for shore protection structure is practically installed in globally but most of structures in the present day became villainous because of bad accessability. In this study, hydrophilic revetments for control and protection of coastline erosion will be developed in order to make up for a faculty of the shore erosion protection block with better accessibility and excellent protection ability. Experimental measurements were researched to insure for the capacity and facility on reflection coefficient, overtopping volume, and overtopping height characteristics of newly developed shore erosion protection block in model tests. As the result, hydraulic model tests show much excellent than the general step block. Field tests were carried out also to verify through vegetative test on an affinity and construction work test of control-protection on coastline erosion with actual utilization. In the latter case, deposition of sand accumulation occurred in fairly short time at the established reaches and then we can be confirmed to utilize for newly developed block as the revetments for control and protection of coastline erosion.

• Applied Chemistry for Engineering
• /
• v.16 no.6
• /
• pp.834-841
• /
• 2005

Polyethylene glycol esters (PEG-esters) were synthesized by condensation reaction of dicarboxylic acid such as adipic acid and sebacic acid and several PEGs. The PEG-esters were analyzed by FT-IR, $^1H-NMR$ and HPLC for structure analysis, and by GPC for molecular weight. Through the analysis of surface tension, critical micelle concentration (CMC), aluminum contact angle of water solution containing the PEG-ester, the synthetic PEG-esters are proven to exhibit surfactant properties. The surface tension ranged from 45 to 50 dyn/cm depended on the concentration and structures of the PEG-esters. The surface tension of PEG-esters with sebacic acid moiety and short polyoxyethylene unit resulted in lower value than that of PEG-ester with adipic acid moiety and long polyoxyethylene unit. The CMC of water solution containing 2.5 wt% PEG-ester with sebacic acid moiety estimated at $0.9{\times}10^{-5}{\sim}5.3{\times}10^{-3}mol/L$ depended on the structures of PEG-esters. The CMC of PEG-esters with long polyoxyethlene unit showed a higher value than that of PEG-esters with short polyoxyethylene unit. Meanwhile, the CMC of PEG-esters with adipic acid moiety was not distinct due to their high hydrophilic character. As the results of contact angle and cutting time aginst aluminum, the contact angle ranged from $45^{\circ}$ to $53^{\circ}$ depended on the concentration of PEG-esters. The cutting time of aluminum showed the shortest value at CMC, but the longest value above CMC. This fact indicates that the CMC of PEG-esters is a very important factor in drilling aluminum.

• Fire Science and Engineering
• /
• v.23 no.6
• /
• pp.66-74
• /
• 2009

When a fire occurs, the concrete structure's strength decreases by the increasing temperature under the fire in certain condition of constant load. And, the ratio of the axial force is changed by such decreased strength so that the structure is deformed. In this research, considering such case, we have conducted an actual fire test for the concrete lining with constant loading condition and various fire conditions. The specimen adopts the shape condition for small practical specimen defined by the EFNARC and we used 24MPa, 40MPa and 50MPa to analyze the thermal properties by the strength. The ratio of loading is imposed by a certain loading condition based on 20% and 40% of the sectional stress in concrete and MHC Fire is selected to realize the thermal impact of the concrete by rapid increasing temperature. As the result of the experiment, in the same ratio of loading, the 50MPa specimen shows more cracks and spalling as time goes on. The area damaged by the fire, according to the functional criteria of the concrete lining under the fire in ITA, does not satisfy with the standard in lack of 50mm depth from the heating surface at total 200mm lining.

• Journal of Korea Multimedia Society
• /
• v.14 no.5
• /
• pp.669-680
• /
• 2011

R-trees are widely used in various areas such as geographical information systems, CAD systems and spatial databases in order to efficiently index multi-dimensional data. As data sets used in these areas grow in size and complexity, however, range query operations on R-tree are needed to be further faster to meet the area-specific constraints. To address this problem, there have been various research efforts to develop strategies for acceleration query processing on R-tree by using the buffer mechanism or parallelizing the query processing on R-tree through multiple disks and processors. As a part of the strategies, approaches which parallelize query processing on R-tree through Graphics Processor Units(GPUs) have been explored. The use of GPUs may guarantee improved performances resulting from faster calculations and reduced disk accesses but may cause additional overhead costs caused by high memory access latencies and low data exchange rate between GPUs and the CPU. In this paper, to address the overhead problems and to adapt GPUs efficiently, we propose a novel approach which uses a GPU as a buffer to parallelize query processing on R-tree. The use of buffer algorithm can give improved performance by reducing the number of disk access and maximizing coalesced memory access resulting in minimizing GPU memory access latencies. Through the extensive performance studies, we observed that the proposed approach achieved up to 5 times higher query performance than the original CPU-based R-trees.

• Journal of Information Management
• /
• v.8 no.5
• /
• pp.130-140
• /
• 1975

이용자(利用者) 중심(中心)의 대화방식(對話方式) 시스팀을 개발(開發)하고 시험(試驗)하였다. 2년(年)동안 280개의 프로파일로 CA - Condensates 데이터 베이스내에서 정보(情報)를 검색(檢索)해 보았다. 그 시스팀의 작업능률(作業能率)을 사용(使用)한 데이터 베이스와 하드웨어의 구조(構造), 소프트웨어 패키지, 이용자(利用者)의 수(數), 그리고 정보(情報)센터에서 제공(提供)한 보조(補助)에 따라 평가(評價)하였다. 대화식(對話式) 검색방법(檢索方法)이나 이용자(利用者)의 요구(要求)를 양화(量化)하는 것, 그리고 여러가지 분야별(分野別)로 검색(檢索)하는 방법(方法) 등 이용자(利用者)의 요구(要求)를 보다 충실(充實)하게 만족(滿足)시킬 수 있는 여러가지 방법(方法)들을 논의(論議)하였다. 모든 정보(情報)시스팀의 목적(目的)은 적시(適時)에 올바른 정(情)보를 적자(適者)에게 제공(提供)하는 것이라고 잘 알려져 있다. 다시 말해서, 정보(情報)시스팀의 주요목적(主要目的)은 이용자(利用者)의 요구(要求)를 충족(充足)시켜 주는 것이다. 이러한 관념(觀念)의 변화(變化)는 정보처리(情報處理)에 큰 변화(變化)를 가져와 정보(情報)시스팀의 적응성(適應性)을 증가(增加)시키기 위해 여러 가지 새로운 방법(方法)들이 개발(開發)되었다. 정보(情報)시스팀들 사이의 상호작용(相互作用), 사람과 컴퓨터와의 대화(對話), 그리고 컴퓨터의 조력(助力)으로 이용자(利用者)의 프로파일을 작성(作成)하는 것 등은 이용자(利用者)의 요구(要求)를 존중(尊重)하고, 필요(必要)한 정보(情報)를 쉽게 찾기 위해서 고안(考案)된 것이다. 한편, 우리들은 이용자(利用者)의 특성(特性)이나 배경(背景), 그리고 문헌(文獻)에 대한 그의 습성(習性) 등에 대해서 얼마나 모르고 있는가를 깨닫게 된다. 상기(上記)의 내용(內容)을 요약(要略)하면, 근대정보(近代情報) 시스팀은 다음의 필요조건(必要條件)을 만족(滿足)해야 한다. 1) 이용자(利用者)의 요구(要求)에 호응(呼應)하기 위해서 적합(適合)한 일련(一連)의 정보(情報)를 제공(提供)해야 한다. 2) 이용자(利用者)와의 관계(關系)에서 시스팀은 적극적(積極的)이어야 한다. 즉, 프로파일 검색공식(檢索公式)에서 유발(誘發)되는 잘못을 지시(指示)하고 지적(指適)할 수 있어 야 한다. 나아가서 컴퓨터의 조력(助力)으로 프로파일을 작성(作成)하고 쉽게 수정(修正)할 수 있는 바람직하다. 우리들은 상기(上記)한 필수조건(必須條件)에 일치(一致)하도록 노력(努力) 하고 Bratislava에 위치(位置)하고 있는 슬로박 과학원(科學院)의 무기화학연구소(無機化學硏究所)와 화학공업경제연구소(化學工業經濟硏究所)가 공동(共同)으로 개발(開發)한 시스팀이 상기(上記)의 특수성(特殊性) 최소(最少)한 몇가지 도입(導入)하였다. 시스팀은 CACS라는 작업명하(作業名下)에서 운영(運營)되었다. 대략 15개월동안 280여개의 프로파일로 CA- Condensates 데이터베이스에서 정보(情報)를 검색(檢索)하여 이용자(利用者)들에게 최신정보(最新情報) 주지사업(周知事業)을 해 보았다. 우리들은 시스팀의 작업능률(作業能率)을 평가(評價)하고 이용자(利用者)의 요구(要求)를 만족(滿足)시키는 최선(最善)의 방법(方法)을 모색(摸索)하였다. 우선 이용자(利用者)와 시스팀사이를 밀접(密接)하게 연결(連結)하는데 중점(重點)을 두었다. 작업능률(作業能率Z)을 분석(分折)해 보고 우리들은 효율(效率)에 영향(影響)을 주는 인자(因子)는 다음의 4가지 주요분류(主要分類)에 속한다는 결론(結論)을 얻었다. (1) 검색(檢索)하는 데이터 베이스 (2) 情報시스팀, 소프트웨어 패키지 그리고 하드웨어 구조(構造) (3) 이용자(利用者)의 특성(特性)과 그의 요구(要求) (4) 정보(情報)센터가 이용자(利用者)에게 제공(提供)하는 보조(補助)

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.1
• /
• pp.27-35
• /
• 2019

The existing middle-long span railway bridge has been mainly applied to steel box girder bridges. However, the steel box girder bridges have disadvantages in securing the space under the bridge, and the main girder is made of a thin plate box shape, resulting in a ringing noise due to the vibration. Many complaints about noise have been raised. For this reason, there is a need for the development of long railway bridges that can replace steel box girder bridges. In this paper, the characteristics of the steel composite railway bridge currently developed were introduced and a time history analysis was conducted using MIDAS Civil reflecting the speed of KTX load for 40m and 50m bridges. In addition, from the analysis results, the dynamic behavior of target bridges were verified and it was examined whether they meet the dynamic performance criteria proposed in the railway design standards. As a result, all of the bridges under review satisfied the dynamic safety criteria, however, in case of 40m of span, the vertical acceleration value was very large. In order to solve this problem, authors proposed the improvement plan and corrected the cross section to confirm that the vertical acceleration decreased.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.4
• /
• pp.215-222
• /
• 2019

The heat conduction problem with discontinuous material coefficients generally consists of the conservative equation, boundary condition, and interface condition, which should be additionally satisfied in the solution procedure. This feature often makes the development of new numerical schemes difficult as it induces a layered singularity in the solution fields; thus, a special approximation is required to capture the singular behavior. In addition to the approximation, the construction of a total system of equations is challenging. In this study, a wedge function is devised for enriching the approximation, and the interface condition itself is embedded in the moving least squares(MLS) derivative approximation to consistently satisfy the interface condition. The heat conduction problem is then discretized in a strong form using the developed derivative approximation, which is named as the interface immersed MLS difference method. This method is able to efficiently provide a numerical solution for such interface problems avoiding both numerical quadrature as well as extra difference equations related to the interface condition enforcement. Numerical experiments proved that the developed numerical method was highly accurate and computationally efficient at solving the heat conduction problem with interfacial jump as well as the problem with a geometrically induced interfacial singularity.

• Journal of Internet Computing and Services
• /
• v.19 no.6
• /
• pp.21-29
• /
• 2018

In the era of the 4-th industrial revolution, the concept of smart factory is emerging. There are efforts to predict the occurrences of facility errors which have negative effects on the utilization and productivity by using data analysis. Data composed of the situation of a facility error and the type of the error, called the facility error log, is required for the prediction. However, in many manufacturing companies, the types of facility error are not precisely defined and categorized. The worker who operates the facilities writes the type of facility error in the form with unstructured text based on his or her empirical judgement. That makes it impossible to analyze data. Therefore, this paper proposes a framework for constructing a phrase network to support the identification and classification of facility error types by using facility error logs written by operators. Specifically, phrase indicating the types are extracted from text data by using dictionary which classifies terms by their usage. Then, a phrase network is constructed by calculating the similarity between the extracted phrase. The performance of the proposed method was evaluated by using real-world facility error logs. It is expected that the proposed method will contribute to the accurate identification of error types and to the prediction of facility errors.

• Journal of the Society of Disaster Information
• /
• v.14 no.4
• /
• pp.466-473
• /
• 2018

Purpose: Nowadays, it is the trend that seismic isolation method and combined method are used for seismic retrofitting, if concrete sphere foundation(CSF) system is applied to mid and low rise RC structure for the seismic isolation, the characteristics of concrete sphere, etc split tensile strength will be need. Method: The various experiments are carried out to know the split strength of high strength concrete sphere(60Mpa) and the ratio of split strength of concrete sphere to standard cylinder specimen, the size effect of concrete sphere with diameter. Results: It was purposed that the split strength of concrete sphere with diameter 150mm will be lower than that of cylinder specimen but, the average value is 4.39 Mpa and the ratio is higher than that of cylinder specimens, each 3.8% and 13.7%, the reason of this result is thought that the internal stress action of spot load and line load are different. Conclusion: There is a standard method for split tensile strength of cylinder type specimen, but there are few studies for the tensile split of concrete sphere. And therefore, in this study, theoretical and experimental details of concrete sphere will be served for the concrete sphere foundation or other sequent studies.

• Journal of Convergence for Information Technology
• /
• v.9 no.5
• /
• pp.158-164
• /
• 2019

Recently many studies to reduce the noise of dental hand piece which generate inevitably mechanical sound to offend to the ear of a patient have been spotlighted. Generally, methods of adding a sound absorbing material inside the exhaust valve, air pump of machine or automobile are widely reported as optimal way to reduce the mechanical noise. In this paper we studied a new UV laser aided manufacturing of micro-porous structure of EPP substrate and applied dental hand piece to improve the efficiency of sound absorption. A lot of micro-sized pores were fabricated with UV laser processing on the surface of sliced EPP substrate. From fundamental experiments, more high-performance of micro-porous EPP substrate has finally demonstrated for sound-absorbing structure of the micro muffler inside dental hand piece, which actually has the excellent potential to apply a lot of potable machine.