• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.10
• /
• pp.1006-1013
• /
• 2008

In this study, it is outlined that heavy weight floor impact noise induced by the vibration of slab can be reduced using multi tuned mass damper(MTMD) effectively. Substructure synthesis is utilized to develope analytical model of the slab coupled with MTMD and acoustic power is introduced to evaluate the performance of noise control for simplicity. Numerical analysis is carried out to investigate the effect of the properties of MTMD on the vibration and noise control of the simply supported slab. Numerical analysis shows that mass ratio of MTMD is critical on the vibration and noise control of the slab and it is also essential to reduce the vibration in higher modes of slab in the light of its great effect on the radiation of sound.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.659-664
• /
• 2008

In this study, it is outlined that heavy weight floor impact noise induced by the vibration of slab can be reduced by multi tuned mass damper(MTMD) effectively. Substructure synthesis is utilized to develope analytical model of slab coupled with MTMD and acoustic power is introduced to evaluate the performance of noise control for simplicity. Numerical analysis is carried out to investigate the effect of the properties of MTMD on the vibration and noise control. Numerical analysis shows that mass ratio of MTMD is critical on the vibration and noise control of the slab and it is essential to reduce the vibration in higher modes of slab because it has a great effect on the radiation of sound.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.815-819
• /
• 2007

최근 기록적인 집중호우와 태풍으로 인해 홍수의 피해가 점점 증가하고 있다. FLUMEN과 같은 홍수범람 해석 모형을 이용한 비구조적인 홍수대책들은 홍수 피해를 확실히 경감시켜줄 수 있다. 본 연구에서는 FLUMEN 모형의 적용성을 검토하여 홍수피해 저감방안을 제시하였다. 천수방정식을 지배방정식으로 하고 유한체적법에 기반을 둔 이 모형을 대상유역으로 진위천 구간을 선정하여 적용하였다. 1998년 8월 7일${\sim}$9일에 발생했던 실제 강우사상으로 적용성을 검토하였으며, 침수실적도와 모의범람면적을 비교하였을 때 미미한 차이를 보였다. 적용성 검증 후, 빈도별 홍수범람 모의를 실시하였으며, 200년 빈도의 홍수량에 대하여 2가지 경감대책(제방의 보축, 상류 유입부 천변저류지)에 대하여 범람모의 하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.2
• /
• pp.109-117
• /
• 2022

There has been an increasing number of studies on photovoltaic energy generation system in an offshore site with the largest energy generation efficiency, as increasing the researches and developments of renewable energies for use of offshore space and resources to replace existing fossil fuels and resolve environmental challenges. For installation and operation of floating photovoltaic systems in an offshore site with harsher environmental conditions, a stiffness of structural members comprising the total system must be reinforced to inland water spaces as dams, reservoirs etc., which have relatively weak condition. However, there are various limitations for the reinforcement of structural stiffness of the system, including producible size, total mass of the system, economic efficiency, etc. Thus, in this study, a floating breakwater is considered for reducing wave loads on the system and minimizing the reinforcement of the structural members. Wave reduction performances of floating breakwaters are evaluated, considering size and distance to the system. The wave loads on the system are evaluated using the higher-order boundary element method (HOBEM), considering the multi-body effect of buoys. Stresses on structural members are assessed by coupled analyses using the finite element method (FEM), considering the wave loads and hydrodynamic characteristics. As the maximum stresses on each of the cases are reviewed and compared, the effect of floating breakwater for floating photovoltaic system is checked, and it is confirmed that the size of breakwater has a significant effect on structural responses of the system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.266-271
• /
• 1997

본 연구는 믹서기의 다지기칼날(Mincing Knife)이 구조적으로 가지고 있는 모멘트불평형(Couple Unbalance) 문제를 해결하기 위한 밸런싱방법을 제시한다. 유한요소법에 의하여 칼날에 작용하는 원심력, 정적 불평형량(Static Unbalance) 및 불평형각위치(Unbalance Angle)를 계산하고, 이를 바탕으로 반고리(Semiannular) 형상의 질량을 설계하여 모멘트 밸런싱을 수행하였다. 밸런싱을 수행한 후의 다지기칼날은 분해칼날(Cutting Knife)과 거의 비슷한 동적거동을 가지게 됨을 확인하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.6
• /
• pp.90-94
• /
• 2021

With the increased interest on quiescent place for residential place, the noise generation from facilities needs to be minimized. One important noise source include sounds from operation of elevators. The elevator operates between floors and generates significantly annoying sounds to the nearby living spaces. It is recognized as the significant contributor inducing noise annoyance to residents. Elevator is supported to the building structure at several locations for movements between floors. In this study, the vibration reduction by use of polymer concrete on the support location was demonstrated. By measuring and comparing the vibration generation when supported on cement and polymer concrete, the noise reduction performance was evaluated. The polymer concrete was made in the form of being inserted into the wall that imitates the hoistway. The impact vibration was induced to the bracket and vibration transfer magnitude was measured. The damping ratio was evaluated through normalization and curve fitting of transient response, and comparison was performed for each resin mixing ratio. By use of polymer concrete, it was possible to reduce the vibration generation in an effect manner without sacrifice on the structural rigidity.

• JOURNAL OF ELECTRICAL WORLD
• /
• s.315
• /
• pp.74-79
• /
• 2003

지구온난화 방지 등 환경보전을 목적으로 전기기기 및 설비의 전력소비를 저감시키기 위한 성에너지관련법이 일부에서 시행되어 각 방면에서 그에 대한 대책이 이루어지고 있다. 전기기기 중에서도 공조기는 일반가정의 소비전력에서 차지하고 있는 비율이 $24\%$로 상당히 큰 편이다 최근 공조기는 소비전력을 저감시키기 위해 기간부품의 효율 개선을 도모하여 왔으나, 이 효율 개선에는 전력소비가 큰 압축기(탑재)모터와 이것을 구동하는 인버터의 손실 저감도 반드시 필요하다. 또 효율개선 외에 공조기 운전시의 쾌적성 향상의 관점에서 저진동화 및 저소음화를 도모할 필요가 있어 구조명과 함께 인버터 제어면에서의 대책을 시행하여 왔다. 압축기 중에서도 성능개선이 두드러진 룸에어컨은 압축기에 고효율의 브러시레스 DC모터를 탑재하여 정현파구동방식을 이용한 인버터에 의해 고효율화를 실현하였다. 이 정현파구동방식은 독자적인 과(過)변조 PWM(Pulse-Width Modulation) 방식을 적용하여 효율 개선에 크게 기여하고 있다. 또 인버터는 압축기 특유의 맥동(脈動)부하에 기인하는 진동을 제어$\cdot$억제하여 저진동화를 실현하였다. 또한 패키지에어컨에서는 인버터 캐리어주파수에 기인하는 캐리어음(音)을 인버터제어로 억제하여 저소음화를 실현하였다. 본고에서는 공조기를 대상으로 특히 에너지 소비가 큰 압축기용 모터와 이것을 구동하는 인버터의 효율개선 기술과 저진동화 및 저소음화를 도모하기 위한 인버터 응용기술에 관하여 기술한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.309-313
• /
• 2000

A structural-acoustic coupling problem involving fluid in a cavity divided with flexible walls and porous materials is investigated in this paper. In many practical problems, the use of finite elements to discretize the fluid region leads to large stiffness and mass matrices. But, since the acoustic boundary element discretization requires to put elements only on the surface of structure, the size of matrices is reduced considerably. Here, we developed a numerical analysis program for the structural-acoustic coupling problems of the multi-region cavity, using boundary elements for the fluid regions and finite elements for the structure. By considering sound transmission through layered systems placed in a cavity, the accuracy of the coupled acoustical-structural finite element model has been verified by comparing its transmission loss predictions with analytical sloutions. Example problems are included to investigate the characteristics of the multi-region structural-acoustic coupling system with porous material.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.101-101
• /
• 2011

투명전도성산화물(transparent conducting oxides, TCOs) 박막으로써 널리 쓰이는 산화인듐주석(indium tin oxide, ITO)은 전기 전도성과 광 투과성이 우수하여 주로 유기발광다이오드(organic light-emitting diode, OLED)의 전극, 발광다이오드(light-emitting diode, LED)의 current spreading 층 및 태양전지(solar cell)의 윈도우층(window layer) 등의 광전자 소자로 응용되고 있으나, 고가의 indium 가격과 인체에 유해한 독성 등이 문제점으로 지적되고 있다. 따라서 indium의 함량을 저감한 새로운 조성의 TCO 또는 indium을 함유하지 않은 친환경적인 TCO 대체 재료 개발의 필요성이 증대되고 있다. 이러한 재료 중 하나인 AZO (Al-doped zinc oxide, $Al_2O_3$: 2 wt.%)는 3.82eV의 넓은 에너지 밴드갭을 가지며, 가시광선 및 근 적외선 파장 영역에 대하여 90% 이상의 높은 투과율을 나타낸다. 또한, 습식식각이 가능하며, 매우 풍부하여 원가가 매우 저렴하고, 독성이 없다. 본 연구에서는 박막 증착율이 높고, 제작과정의 조정이 용이한 RF magnetron 스퍼터를 이용하여 glass 기판 위에 AZO 박막을 성장하고, $N_2$ 분위기에서 다양한 온도 조건에서 열처리(rapid thermal annealing, RTA)하여 전기 및 광학적 특성에 대하여 비교 분석하였다. 또한, 이후에 기존의 성장방법과 달리 고가의 진공 장비를 사용하지 않고, 저온에서도 간단한 구조의 장비를 이용하여 균일한 나노구조를 성장시킬 수 있는 전기화학증착법(electrochemical deposition)으로 AZO 박막위에 ZnO 나노로드를 다양한 성장조건에 따라 성장시켜 광학적 특성을 비교 분석하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.5
• /
• pp.15-23
• /
• 2010

To reduce the vibration levels, additional dissipation elements such as dry friction dampers are sometimes integrated into bladed disk assembly. In this study, forced response analysis systems for a tuned bladed disk with friction dampers were developed and verified. For the efficient nonlinear vibration analysis, multi-harmonic balanced method and cyclic boundary condition were used. Also, mode shapes obtained using fictitious mass method were used to describe the motion of the structures with the concentrated structural nonlinearity, friction damper. The relative convergence of fictitious mass and traditional unconstrained modes were compared.