• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.161-164
• /
• 2008

In recent years, carbon fiber-reinforced polymer (CFRP) has been widely used for repairing and/or strengthening structural elements in concrete. Not enough test data, however, are available to predict the long-term performance of the repaired and improved structures exposed to weathering. The objective of this research is to study the effect of freeze-thaw cycling on the behavior of reinforced concrete (RC) beams strengthened in shear with carbon fiber sheet. Six small-scale RC beams (100mm${\times]$100mm${\times]$400mm) were strengthened with CFRP in shear, subjected to up to 400 cycles freeze-thawing from -17${\sim}4^{\circ}C$, and tested to failure in four-point bending. Test result, there was no significant damage to carbon fiber sheet strengthened concrete beams had been suffered 30 cycles of freeze-thawing, and more over 60 cycles of freezing-thawing brought about a reduction in resistance of only 25% of the initial level.

• Computational Structural Engineering
• /
• v.17 no.1
• /
• pp.15-24
• /
• 2004

첨단 산업 시대에 도래하면서 재료와 화학 공학의 눈부신 발전에 힘입어 각종 구조용 신소재인 복합재료가 등장하게 되었고, 많은 공학 분야에 활발히 적용되었다. 최근들어 건설 산업에 복합재료의 일종인 FRP(Fiber Reinforced Plastics)재료를 철골 부재와 같은 얇은 판, 개단면의 형태인 박벽 복합재료를 사용하려는 노력들이 진행되어 왔다. 따라서 건설 분야의 기술자들은 박벽 복합재료의 해석 및 설계 기술력과 산업화 활용에 대해 관심을 갖게 되었다.(중략)

• Proceedings of KOSOMES biannual meeting
• /
• 2004.11a
• /
• pp.137-141
• /
• 2004

Ship structures are basically an assembly of plate elements and the load-carrying capacity or the ultimate strength is one of the most important criteria for safety assessment and economic design. Also, Structural elements making up ship plated structures do not work separately, resulting in high degree of redundancy and complexity, in contrast to those of steel framed structures. To enable the behavior of such structures to be analyzed, simplifications or idealizations must essentially be made considering the accuracy needed and the degree of complexity of the analysis to be used. On this study, to investigate effect of modeling range, the finite element method are used and their results are compared varying the analysis ranges. The model has been selected from bottom panels of large merchant ship structures. For FEA, three types of structural modeling are adopted in terms of the extent of the analysis. The purpose of the present study is to numerically calculate the characteristics of ultimate strength behavior according to the analysis ranges of stiffened panels subject to uniaxial compressive loads.

• Journal of Welding and Joining
• /
• v.9 no.4
• /
• pp.1-8
• /
• 1991

용접구조물을 그의 사용목적에 적합하게 제작하려면 그의 구조설계와 사용재료의 적절한 선택과 사용성능을 충분히 확보하게 끔 제작과정과 품질보증을 할 수 있는 것이 필요하다. 즉 용접성 (Weldability)을 만족하게 하는 것이다. 구조물의 제작에 있어서 배려하여야 할 것은 구조의 사 용성능의 확보와 안전성인 것이다. 사용성능이란 구조의 강도, 기능 그리고 미관이나 끝내기의 외관적 성능등이다. 우리들의 생활공간에 존재하는 구조물이 한번 파손이나 파괴의 사고가 발 생하면 치명적인 것이 된다. 용접설계 생산과 제작의 기술적인 준비로써 용접구조물을 대상으로 용접가공에 중점을 두어 사용되는 말이다. 용접설계는 구조물과 제품의 용접제작과정을 완전히 지시하고 용접이음에 요구되는 사용성능이 확보 되게 끔 부재배치와 치수등이 선정되고 제작과 검사등의 실제 작업성을 충분하게 고려한 제작계획을 세우는 것을 말한다. 이와 같이 된 용접 설계를 바탕으로 용접기술자가 최적한 용접재료의 용접조건등을 결정한다. 즉 설계와 용접시공은 서로 밀접한 관계를 갖고 있어야 한다. 특히 용접설계의 비교적 초기단계에 속하는 것은 제품 기본계획과 강도해석 그리고 구조설계의 과정에 반드시 용접기술자의 관여가 필요한 것이다. 그리고 설계의 최적화를 위하여는 많은 정보 특히 경험적인 정보와 구조 해석적인 정보가 잘 처리되어야 한다. 오늘날의 CAD의 도입이란 전산기의 처리기술과 graphic기술을 묘미 있게 이 용한 것이라 할 수 있다. 용접구조물의 용접성을 논술하려면 다음과 같이 구분하는 것이 바람 직하다. 1. 용접구조물의 허용강도 2. 동접구조용의 강의 선택 3. 용접시공조건 4. 용접설계 이중 용접 제작과정을 표 1에 나타내었다. 구조물의 용접설계 요구조건으로써, 1)손상, 2)탄성 파손, 3)항복응력, 4)기계적인 불안정성, 5)파괴와 붕괴등을 고려하여야 하며 구조용 강의 선택은 1. 강도(strength) 2.연성(ductility) 3.인성(toughness)을 고려하여 구조물의 설계에 충분히 만 족해야 한다.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.6
• /
• pp.697-706
• /
• 2006

Tower crane's wall tie is generally used for extending of mast height according to rising of lifting height. In order to get wall tie member force this problem, this study concerning wall tie is based on load data described in manual book of 290HC model. This study made the equation of wall tie member force and computer programming for calculating wall tie member force and then get ${\theta}-P$ curves(angle-wall tie force). After considering the ${\theta}-P$ curves, optimum angle range ($48.4^{\circ}{\sim}77.2^{\circ}$) about wall ties (A), (C) members was obtained. Member force of wall tie (B) was changed from tension to compression or from compression to tension at $74^{\circ}$ in service and $54^{\circ}$ in out of service. When both horizontal force($H_A$) and torsional moment ($M_D$) were varied from (+) to (-), wall tie force(A, B, C) were changed almost symmetrically about ${\theta}$-axis. Because this study was based on wall tie analysis conditions, wall tie members in symmetric and ideal geometry shape used for analizing wall tie of tower crane, it is necessary to have more careful verification in order to apply generally the results of this study.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.1
• /
• pp.35-44
• /
• 2022

It is essential to control the lateral displacement and differential axial shortening of the vertical elements in high-rise buildings. Recently, an outrigger or a mega structure system has been adopted to control the lateral displacement. Furthermore, to resolve the problems caused by differential axial shortening in high-rise buildings, analytical prediction and correction is often studied; however, the study on the comparisons of the lateral load resisting systems to address differential axial shortening is less. Therefore, in this paper, a 60-story RC residential building using an outrigger or a mega structure system is analyzed with a construction sequence. Moreover, differential axial shortening can result in an additional member force of structural members and failure of non-structural members. These problems caused by differential axial shortening affects the behaviors and can damage the important structure member in the high-rise buildings. Hence, the effects of the systems on differential axial shortening between the vertical elements in high-rise buildings are studied.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.521-524
• /
• 2011

본 논문에서는 순환골재에 대하여 구조용 적용성 검증을 목표로 하였으며, 천연골재와 순환골재 치환율에 따른 압축파괴강도와 압축강도증가에 따른 파속도의 상관관계를 비교 분석하였다. 설계기준강도 21, 27, 35MPa에 순환굵은골재 치환율 0, 30, 50, 100%를 적용하여 설계기준강도에 따른 순환굵은골재 치환율의 배합을 총 12가지로 설정하였다. 재령160일까지의 압축파괴강도의 변화를 대기양생 공시체, 수중 양생공시체 그리고 코어공시체를 이용하여 비교하였고, 모의부재(800${\times}$800${\times}$200mm)를 통하여 재령160일까지의 초음파속도를 측정하였다. 압축파괴실험을 통하여 취득한 데이터를 비교해 본 결과 순환굵은골재 치환율에 따른 강도저하현상은 나타나지 않았다. 또한, 재령일에 따른 강도 증가와 함께 파속도도 같이 증가함을 알 수 있었다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.9 no.3 s.43
• /
• pp.1-8
• /
• 2005

This paper describes a new objective methodology of seismic building damage assessment which is called Advanced Component Method(ACM). ACM is a major attempt to replace the conventional loss estimation procedure, which is based on subjective measures and the opinions of experts, with one that objectively measures both earthquake intensity and the response ol buildings. First, response of typical buildings is obtained analytically by nonlinear seismic static analysis, push-over analyses. The spectral displacement Is used as a measure of earthquake intensity in order to use Capacity Spectrum Method and the damage functions for each building component, both structural and non-structural, are developed as a function of component deformation. Examples of components Include columns, beams, floors, partitions, glazing, etc. A repair/replacement cost model is developed that maps the physical damage to monetary damage for each component. Finally, building response, component damage functions, and cost model were combined probabilistically, using Wonte Carlo simulation techniques, to develop the final damage functions for each building type. Uncertainties in building response resulting from variability in material properties and load assumptions were incorporated in the Latin Hypercube sampling technique. The paper also presents and compares ACM and conventional building loss estimation based on historical damage data and reported loss data.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.9-12
• /
• 2008

PSC-I girder is widely used in designing bridge. Currently partial advanced country have constructed bridge with high strength concrete, while in-country rather less concrete strength(40MPa) has been used to build bridge girder. So, this paper presents characteristics and behavior of member casted by high strength concrete to apply practically. For this aim, 4 girders were fabricated to investigate performance and structural behavior. Prior to test, structural analysis was performed with common program. Steel gages and concrete gage were filled up to measure longitudinal and vertical strain of reinforcement and concrete. Linear Variable Differential Transducer and concrete surface gage were also set to measure deflection and strain of concrete. Load-deflection relation and crack mode were analyzed at transfer and test and compared with the structural analysis

• Journal of the Korea Concrete Institute
• /
• v.20 no.2
• /
• pp.175-183
• /
• 2008

Domestically, application of High Flowing Self-Compacting Concrete (HSCC) is limited to building structures and it is difficult to find examples of application in civil infrastructural constructions. However, in the case of North America and Europe, by introducing precast and prestressed system, HSCC is being used for high-density reinforced bridge members. Hence it is assessed that broadening the utilization of HSCC into areas such as bridges and civil construction is required. Therefore in this research, to apply HSCC to high-density reinforced bridge members, ground granulated blast-furnace slag and fly ash were mixed in binary and ternary systems. Also the dynamical characteristics of HSCC, following 1st class regulations of Japan Society of Civil Engineers (JSCE), were assessed to enable application on high-density reinforced structures. The test results revealed ternary system mixture showed better mechanical characteristics than binary system mixture and the application on high-density reinforced precast bridge members seems possible.