• Journal of the Korea Society of Computer and Information
• /
• v.26 no.6
• /
• pp.9-17
• /
• 2021

In this paper, we propose a reversely using the "Man In The Middle Attack" attack technique as a way to introduce network security without changing the physical structure and configuration of the existing network, a Virtual Network Overlay is formed with only a single Ethernet Interface. Implementing In-line mode to protect the network from external attacks, we propose an integrated control method through a micro network security sensor and cloud service. As a result of the experiment, it was possible to implement a logical In-line mode by forming a Virtual Network Overlay with only a single Ethernet Interface, and to implement Network IDS/IPS, Anti-Virus, Network Access Control, Firewall, etc.,. It was possible to perform integrated monitor and control in the service. The proposed system in this paper is helpful for small and medium-sized enterprises that expect high-performance network security at low cost, and can provide a network security environment with safety and reliability in the field of IoT and embedded systems.

• Ecology and Resilient Infrastructure
• /
• v.7 no.4
• /
• pp.256-261
• /
• 2020

Roadside non-point pollution reduction facilities are classified as infiltration, vegetation, reservoir, and wetland types based on their respective pollution reduction mechanisms. However, without a detailed analysis of the road and traffic conditions it is very difficult for civil engineers to determine which category of pollution reduction facility is best suited to their planning requirements. To address this issue, we propose a new decision-making method for the selection of roadside non-point pollution reduction facilities. The principal factors informing the proposed decision-making methods are the road characteristics, including location, structure, number of lanes, and traffic volume. As a result of the study, a total of new pollution reduction plans were developed, with their selection conditions and the corresponding applicable facilities established. The effectiveness of the proposed pollution reduction schemes was demonstrated for roads in Kyounggi-do, providing a valuable basis for future pollution reduction plans.

• Journal of IKEEE
• /
• v.25 no.1
• /
• pp.95-100
• /
• 2021

If we know the location of the hull block and the welding feeder in the shipyard, we can easily obtain the location information of the worker. That data is very useful for implementing a workplace safety monitoring system. However, it is difficult to apply a fixed communication network to the workplace due to the specificity of the hull structure and welding process. In this study, inductive power line communication, which can replace dedicated communication line, was reviewed. A ferrite core was used as an inductive coupler to be installed on the power cable of the welding machine, and a nano-crystalline core was applied as a coupler to be fastened to the support rod of the metal block. In order to visualize the operating principle of the proposed couplers, 3D modeling and finite element analysis were performed with the COMSOL AC/DC module. In the communication performance test using an aluminum profile, when the communication channel was formed by the contact of the welding electrode, the bandwidth was kept above 6 Mbps.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.3
• /
• pp.409-416
• /
• 2022

This paper relates to the blind noise separation method of time-delayed convolutive mixed signals. Since the mixed model of acoustic signals in a closed space is multi-channel, a convolutive blind signal separation method is applied and time-delayed data samples of the two microphone input signals is used. For signal separation, the mixing coefficient is calculated using an inverse model rather than directly calculating the separation coefficient, and the coefficient update is performed by repeated calculations based on secondary statistical properties to estimate the speech signal. Many simulations were performed to verify the performance of the proposed blind signal separation. As a result of the simulation, noise separation using this method operates safely regardless of convolutive mixing, and PESQ is improved by 0.3 points compared to the general adaptive FIR filter structure.

• Membrane Journal
• /
• v.33 no.4
• /
• pp.201-210
• /
• 2023

Dust filter membranes play a crucial role in human life and various industries, as they contribute to several important aspects of human health, safety, and environmental protection. This study presents the development of a polysulfone@polyphenylene sulfide/polytetrafluoroethylene (PSf@PPS/ePTFE) composite dust filter membrane with excellent thermal stability and adhesion properties for high-temperature conditions. FT-IR analysis confirms successful impregnation of PSf adhesive onto PPS fabric and interaction with ePTFE support. FE-SEM images reveal improved fiber interconnection and adhesion with increased PSf concentration. PSf@PPS/ePTFE-5 exhibits the most suitable porous structure. The composite membrane demonstrates exceptional thermal stability up to 400℃. Peel resistance tests show sufficient adhesion for dust filtration, ensuring reliable performance under tough, high-temperature conditions without compromising air permeability. This membrane offers promising potential for industrial applications. Further optimizations and applications can be explored.

• Journal of Advanced Navigation Technology
• /
• v.27 no.4
• /
• pp.436-446
• /
• 2023

In the field of safety-critical systems, analyzing the effects of various failure factors (failure modes) is essential through Failure Mode and Effects Analysis (FMEA). However, with the increasing importance of software in systems, applying FMEA analysis to the design phase has become challenging. This paper proposes the use of Automatic FMEA, which can automatically perform FMEA using model-based design techniques, and presents a case study of FMEA for automotive engines. A comparison is made between the model-based Automatic FMEA analysis tool and existing FMEA tools. The study aims to demonstrate the performance of the Automatic FMEA analysis tool and propose future research plans.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.2
• /
• pp.97-103
• /
• 2023

Since most of the information is transmitted through the network, eavesdropping and interception by a third party may occur. Appropriate measures are required for effective, secure and confidential communication in the network. Steganography is a technology that prevents third parties from detecting that confidential information is hidden in other media. Due to structural vulnerabilities, information protected by encryption and steganography techniques can be easily exposed to illegitimate groups. In order to improve the limitations of LSB where the simplicity and predictability of the hiding method exist, I propose a technique to improve the security of the message to be hidden based on PRNG and recursive function. To enhance security and confusion, XOR operation was performed on the result of selecting a random bit from the upper bits of the selected channel and the information transformed by the RS-box. PSNR and SSIM were used to confirm the performance of the proposed method. Compared to the reference values, the SSIM and PSNR of the proposed method were 0.9999 and 51.366, respectively, confirming that they were appropriate for hiding information.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.92-92
• /
• 2020

최근 지진 발생 빈도와 규모가 증가함에 따라 지진재해에 취약한 지하구조물의 내진성능 향상 및 신속한 복구에 관한 연구가 활발히 진행되고 있다. 대표적인 지하구조물 중 하나인 상수관망은 음용수를 안전하고 원활하게 공급하는 사회기반시설물로써 대부분의 시설물이 지하에 매설되어 있어 지진재해에 매우 취약하다. 지진으로 인해 상수관망 내 누수 및 파손 등의 피해가 발생할 경우, 물 공급이 중단되어 경제적 손실과 사회 전반적인 불편이 우려되므로 피해 관로의 신속한 파악과 복구가 이루어져야 한다. 상수관로에 발생하는 피해는 크게 누수와 파손으로 구분할 수 있다. 관로가 파손된 경우 용수가 표층으로 새어나오기 때문에 탐지가 용이하지만, 누수의 경우 표층으로 드러나는 피해가 없어 탐지 및 수리가 어려운 단점이 있다. 이러한 누수가 장기간 방치될 경우, 해당 시스템의 유수율 감소로 인한 경제적인 손실과 더불어 공급수압의 저하, 그리고 오염물 침투의 위험이 존재한다. 이러한 피해를 막기 위해서는 신속히 누수 지점을 파악한 후, 피해 관로의 교체 혹은 보수가 이루어져야 한다. 현장에서 누수를 직접 탐지하는 방법은 정확도가 높은 반면, 많은 인력과 장비 그리고 비용이 소모되는 단점이 존재한다. 따라서 현장 누수탐지에 앞서 컴퓨터를 이용한 간접 누수탐지 기법이 지속적으로 개발될 필요가 있다. 본 연구에서는 현장 누수탐지의 탐지효율을 향상시키기 위해 수압, 유량 등의 관측 데이터와 수리해석 모의 및 최적화 기법을 활용한 컴퓨터 기반의 다중누수 탐지모형을 개발하였다. 개발 모형은 국내에서 운영 중인 소블럭 상수관망시스템에 적용하여 검증하고 탐지효율을 분석하였다. 컴퓨터 모의를 이용한 다중누수 탐지모형은 지진이나 홍수와 같은 대규모 재난 발생 후, 상수관망시스템의 신속한 복구 및 운영 정상화를 위한 도구로 활용될 수 있을 것으로 기대한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1B
• /
• pp.21-32
• /
• 2008

Flood forecasting is a very important tool as one of nonstructural measures for reduction of flood damages in life and property and its accuracy is also an important factor. However, when we apply the Storage Function Model(SFM) which is mainly used for the flood forecasting system in Korea, the determination of the parameters is very important but it is difficult. So, the parameters have been calibrated by using an empirical formulas and judgement of hydrologist. Hence, in this study we perform the sensitivity analysis to understand the parameter characteristics and establish the ranges of parameters of the SFM. Also we do the parameter calibration by using the optimization techniques and objective functions, and evaluate their performances. Especially, we suggest a method to determine proper parameters by using a objective function which can be obtained from flood events. So, we use the suggested method for parameter estimation and compare the estimated parameters with the previously reported parameters. As a result of the application, the estimated parameters by the suggested method showed better than them from the previously reported parameters.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.357-359
• /
• 2022

The market for eco-friendly food materials by online distribution is rapidly growing due to major environmental pollution such as air, soil, and water quality, and radical changes in living patterns caused by COVID-19. In addition, because of the aging population and the decrease in agricultural-related population due to social structural changes, aquaponics is emerging as a system that can solve problems such as independence of old economic activities, environmental protection, and securing healthy and safe food. This paper aims to design an intelligent plant growth measurement system among intelligent aquaponics production management modules for optimal growth environment derivation and quantitative production prediction by converging various ICT technologies into existing aquaponics systems. In particular, the focus is on designing systems suitable for production sites that do not have high-performance processing resources, and we propose a module configuration plan for production environments and training data and prediction systems.