• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.6
• /
• pp.161-172
• /
• 2012

The purpose of this study is to classify, evaluate and grade the existing highway tunnels to increase landscape and natural statistics keeping the structural safety about tunnel gates area and induce the ones that will be constructed in the future by drawing the improvements and restoring the techniques as an environment-friendly. To examine the types of tunnel gate area, total 54 tunnels were investigated by selecting Gyeongbu Expressway, Yeongdong Expressway, and Jungang Expressway. Tunnel entrances and exit ports were classified as a Wall-closed type and Protruding type, which is based on tunnel gate type. Vegetation Landscape types were classified as Multilayer-Same as the surrounding landscape_(MS), Multilayer-Difference of surrounding landscape_(MD), Single layer-Same as the surrounding landscape_(SS), Single layer-Difference of surrounding landscape_(SD), and a Desolate type which based on vegetation layers and environment-friendly. Potential vegetation recovery was identified based on the structural stability and revegetation potential of the tunnel. The factors include the structural stability of the slope height and slope gradient were selected. Revegetation potential was identified as a growth potential. This factor was used in the step to classify vegetation recovery potential of a tunnel. The result, which investigated the types of tunnel entrances and exit parts has found that the most typical in 33 places was a Wall closed type with 61.1% of the total ones. The case of vegetation landscape types was created but different from the ones surrounding it with 85.2% of the total ones. It is judged that the currently constructed vegetation of tunnel entrance and exit parts had put convenience on the safety and management before landscape consideration. In addition, tunnel entrance and exit parts with excellent potential for vegetation recovery were all Protruding type. In addition, it is judged that slope stability can easily obtain growth. Therefore, entrance and exist of the highway tunnels, which will be constructed in the future, should reflect location and the result of the natural and ecological survey in design by performing it in advance and their types, which minimize the damage area range, should be applied to the local characteristics suitably. In addition, the ecologically healthy tunnel construction should be done by introducing active vegetation recovery techniques based on its safety.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.2
• /
• pp.156-163
• /
• 2017

People with class I intellectual disability need lifelong assistance and protection from their surroundings due to impaired adaptive functioning. They have poor oral health and show higher prevalence of dental caries, periapical inflammation and tooth loss that require proper prosthetic restoration. Because removable prostheses for intellectually disabled patients often lack stability, retention, and maintenance, fixed prostheses are essential and the only available option is dental implants. In this case, a 45 year-old male patient with class I intellectual disability had poor oral hygiene with most of his teeth missing and visited the clinic to recover his masticatory function. Due to such systemic conditions, the definitive restoration of choice was the implant-supported fixed dental prosthesis made of biocompatible and highly strong monolithic zirconia. In consequence of the treatment process, the patient was able to improve his oral environment aesthetically and functionally.

• Journal of the Society of Disaster Information
• /
• v.14 no.2
• /
• pp.174-181
• /
• 2018

Purpose: The purpose of this study is to develop and demonstrate the customized modernization technology of the old aged hydropower generation system in operation Method: The modernization design was carried out based on the daily, weekly, monthly, and yearly information of the power plant in operation at the site. Results: In this paper, a safety diagnosis of existing facilities located in the Philippiness was carried out in accordance with the Special Act on the Safety Management of Domestic Facilities, and a method for reinforcing the facilities was selected. Conclusion: The selection of wheel suitable for the local environment and the maintenance of the old facilities were designed by domestic repair/reinforcement technology.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.26.2-26.2
• /
• 2010

최근에는 차세대 조명용 후보광원인 고출력 백색 LED를 개발하기 위한 경쟁이 치열하며, 이를 위해 업체가 고심하고 있는 가장 큰 문제 중의 하나가 칩에서 발생하는 열을 어떻게 관리하는가 하는 방열의 문제이다. 따라서, LED의 가장 큰 특징인 장수명을 손해보지 않기 위해서는 칩에서 발생되고 있는 열을 외부에 확산시키기 위한 기술 개발이 필수적이다. 다양한 방열소재 중 W-Cu 복합재는 W의 낮은 열팽창계수와 Cu의 높은 열전도도로 인해 방열소재로써 유망한 소재로 주목받고 있으나, 우수한 열적 특성을 발현하기 위해서는 고치밀화를 갖는 W-Cu 복합재 제조가 우선적으로 필요하다. W-Cu 복합체는 일반적으로 액상소결법을 통해 균일한 미세조직을 얻을 수 있으나, 열팽창계수를 낮추기 위해 Cu 함량이 적어지게 되면 치밀화가 어려우며 이를 해결하기 위해 나노입자를 갖는 분말을 이용하고자 하는 연구가 많이 진행되고 있다. 본 연구에서는 W과 Cu 산화물을 이용하는 것이 구성성분끼리의 편석이 발생하지 않으며, 소결성도 우수하여 양산화에 가장 접근한 방법으로 알려져 있다. 그러나, 지금까지의 얻어진 W-Cu 복합체의 경우, 분말상태에서의 얻어진 나노입자가 승온시에 마이크로 크기로 과도한 입자성장이 일어나기 때문에 소결 후에도 나노크기를 유지하기 어려울 뿐만 아니라, 구성상끼리의 응집체가 형성된다. 본 연구에서는 액상소결후에 W 입자가 Cu 기지내에 균일하게 분산되는 동시에 나노크기의 입자를 가지는 고분산 W-Cu 소결체를 얻고자 하였다. 이를 위해 금속산화물 분말의 분쇄를 위해 효과적인 방법으로 알려진 습식상태에서의 고에너지 볼밀링을 통하여 혼합된 텅스텐과 구리 산화물 분말의 수소환원공정을 통해 얻어진 100nm 이하의 입자를 가지는 W-20wt%Cu 나노복합분말을 출발분말로 사용하였다. W-20wt%Cu 나노복합분말의 성형체를 $1050^{\circ}C-1250^{\circ}C$의 온도범위에서 소결거동을 조사하였다. 그 결과, $1100^{\circ}C$ 온도에서 이론밀도에 가까운 소결밀도를 나타내었으며, 이는 기존에 비해 $100^{\circ}C$ 정도 치밀화 온도를 낮추는 결과이다. 소결체의 미세구조 관찰결과, 소결 후 약 200nm의 텅스텐 입자가 Cu내에 균일하게 분산되어 있었다. 제조된 W-Cu 시편에 대해서는 LED 응용성을 조사하기 위해 열전도도와 열팽창계수 등을 평가하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1145-1148
• /
• 2007

한국을 비롯하여 논농사 중심지역에서는 하천 주변이 과거에는 농경지로, 그리고 오늘날은 도시지역으로 개발되어 하천의 원형이 거의 유지되지 못하고 있다. 하천은 수역과 수변으로부터 거리에 따라 여러 개의 이질적 생태적 공간이 이어지는 복합생태계로서 하나의 경관으로 볼 수 있다. 하천이 하나의 온전한 생태적 계로서 기능을 발휘하기 위해서는 이들을 모두 포함하는 하천의 원형이 복원되어야 한다. 현존하는 하천복원사업이 수변 구역의 복원에 초점을 맞추고 있지만, 진정한 복원이 이루어지기 위해서는 온전한 강변 식생의 복원이 선결과제이다. 본 연구에서는 유적군락의 형태로 잔존하는 강변 식생을 조사하여 식생복원 모델로 삼고자 한다. 수위와 침수체제에 의해 하천의 횡단구조를 수변, 홍수터 및 제방으로 구분한 후 각 지소의 적합한 식생단위를 구분하여 생태적 복원을 실현하기 위한 정보를 구축하였다. 수변식생으로는 달뿌리풀군락과 갈대군락이 자주 출현하고, 홍수터에는 갯버들군락과 키버들군락이 우세하였다. 그 중 전자의 식물군락은 하상재료가 거친 입자의 지소에 성립하고, 후자의 것은 미세한 입자의 지소에 성립하는 경향이었다. 제방역에는 버드나무군락, 다릅나무군락, 귀룽나무군락, 물푸레나무군락, 산사나무군락, 신나무군락(한탄강 지류), 참느릅나무군락, 물푸레나무-갈참나무군락(한탄강 본류), 오리나무군락(민통선 북방지역), 소나무군락, 황철나무군락, 느릅나무군락(소양강 상류), 왕버들군락(금강 중류) 등이 성립하였다. 이러한 식생정보를 하천의 지리적인 위치에 따라 구분하였고, 생태적 복원 시 도입식물을 결정하기 위한 자료로 삼기 위해 각 식생단위를 이루는 종 조성을 정보 체계화하였다.을 효율적으로 하기 위하여 Solar Unit으로부터 나오는 전기를 중전기에서 밧데리로 축전을 시키고 완전 충전 후에는 나머지 전기는 방전이 되도록 회로를 구성하였다. 사통수문 자원조사 결과에 의하면 현재 저수지에 물공급을 하는 수문은 취수탑 형식이 70% 이상을 차지하고 있으며 나머지 30%의 사통수문 중 원형수문비가 98% 이상을 차지하고 있다. 현재 대체에너지를 사용하는 저수지 사통수문은 없는 것으로 조사되었으며 전력을 사용하는 사통도 조사결과에 의하면 20% 이내로 나타났다. 이러한 결과는 향후 수리시설 개보수시 적은 예산으로 사업을 시행하는 경우 사통수문의 설치방향의 지표가 될 것으로 판단되며 수리시설의 운영관리에 대한 새로운 대안으로 제시할 수 있다.분류되었다. 지표 유거가 많아 배수등급이 매우양호로 분류되던 토양은 정 등(1995)의 분류와 비교하여 대부분 강우 유출 가능성이 큰 쪽으로 조정되었다. 새로운 수문학적 토양유형을 이용할 경우 낮은 토심에서 암반층이 발견되는 산림토양이 분포한 유역이나 산림, 밭 등에 식질 토양이 많이 분포하는 유역에서는 기존의 방법을 이용하는 것보다 강우 유출량이 높게 평가될 것으로 판단된다. 앞으로 강우 유출량 실측자료와의 비교를 통해 지속적인 보정을 하여야 할 것이며 특히 불투수층의 존재시 일괄적으로 D유형으로 분류된 토양의 경우 깊이에 따라 C 또는 D 유형으로 세분하여 조정할 필요가 있다.가 있었다. 에틸아세테이트분회물의 경우 디글로로메탄 분회물에 비해 다소 낮은 저해효과를 나타내었지만 250 ${\mu}$g/ml 농도에서 약 60%의 세포독성 효과를 나타내었다. 디클로로메탄 분획물과 에틸아세테이트 분

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.1
• /
• pp.109-116
• /
• 2017

This paper describes the investigation into the durability alkali-activated materials(AAM) mortar and paste samples manufactured using fly-ash(FA) and ground granulated blast furnace slag(GGBFS) exposed to a sulfate environment with different GGBFS replace ratios(30, 50 and 100%), sodium silicate modules($Ms[SiO_2/Na_2O]$ 1.0, 1.5 and 2.0). The tests involved immersions into 10% sodium sulfate solution($Na_2SO_4$), 10% magnesium sulfate solution($MgSO_4$), 10% magnesium nitrate solution($Mg(NO_3)_2$) and 5% magnesium nitrate($Mg(NO_3)_2$+5% sodium sulfate solution+$Na_2SO_4$). The evolution of compressive strength, weight, length expansion and microstructural observation such as x-ray diffraction were studied. As a results, in case of immersed in $Na_2SO_4$, $Mg(NO_3)_2$ and $Mg(NO_3)_2+Na_2SO_4$ shows increase in long-term strength. However, for samples immersed in $MgSO_4$, the general observation was that the compressive strength decreased after immersion. The most drastic reduction of compressive strength and expansion of weight and length occurred when GGBFS or Ms ratios were higher. Also, the XRD analysis of samples immersed in magnesium sulfate indicated that expansion of AAM caused by gypsum($CaSO_4{\cdot}2H_2O$) and brucite(MgOH). The results showed that, an additional condition $Mg^{2+}$ in which ${SO_4}^{2-}$ is the presence of a certain concentration, sulfate erosion has to be accelerated.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.6
• /
• pp.98-105
• /
• 2017

In this study, the fiber blending ratio and strain rate effect on the tensile behavior of hybrid fiber reinforced cement composite was evaluated. Hooked steel fiber and polyvinyl alcohol fiber were used for reinforcing fiber. The fiber blending ratio of HSF+PVA were 1.5+0.5, 1.0+1.0 and 0.5+1.5vol.%. As a results, the tensile strength, strain capacity and fracture toughness of the hooked steel fiber reinforced cement composites were improved by the increase of the bond strength of the fiber and the matrix according to increase of strain rate. However, the tensile stress sharply decreased after the peak stress because of the decrease in the number of straightened pull-out fibers by micro cracks in the matrix around hooked steel fiber. On the other hand, PVA fiber showed cut-off fracture at strain rate $10^{-6}/s$ with multiple cracks. However, at the strain rate $10^1/s$, the multiple cracks and strain capacity were decreased because of the pull-out fracture of PVA fiber. The HSF1.5PVA0.5 shown the highest tensile strength because the PVA fiber suppressed the micro cracks in the matrix around the hooked steel fiber and improved the pull-out resistance of hooked steel fiber. Thus, DIF of strain capacity and fracture toughness of HSF1.5PVA were greatly improved. In addition, the synergistic response of fracture toughness was positive because the tensile stress was slowly decreased after the peak stress by improvement of the pull-out resistance of hooked steel fiber at strain rate $10^1/s$.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.6
• /
• pp.135-146
• /
• 2011

Steel structures have been generally painted to prevent corrosion damage. However, the painted film is deteriorated with increase in service life, and then corrosion damage resulting in cross sectional area occurs on steel surface. As a result, the buckling strength of steel structures can be decreased due to the corrosion damages. The evaluation method of the axial buckling strength of columns about a variety of section shapes and supporting conditions have been presented, but evaluation method of buckling strength about irregular nonprismatic columns is not established. In this study, the axial buckling strength of corroded steels was evaluated based on the buckling test results of corroded steel specimens that were cut off at a temporary steel structure. The corroded specimens were picked up total 10 specimens according to various slenderness ratio from the web of a temporary structure's main beam. The length of specimens is 200, 300, 400, 500 and 600mm respectively. The rust productions were removed by the chemical treatment. Then, the surface geometry was measured at intervals of $1{\times}1mm$ by using the optical 3D digitizing system, and the residual thickness of the specimens was calculated. The axial buckling test was performed on 10 corroded specimens and 12 non-corroded specimens under the fixed-fixed support condition. From the test results, the effect of corrosion damages on axial buckling load was investigated. Regardless of corrosion damage degree, the axial buckling strength of corroded specimens and non-corroded specimens was evaluated identically by using minimum average residual thickness or average residual thickness to minus its standard deviation. Reasonable measuring intervals of residual thickness was proposed by using the results to apply for practical works.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.3
• /
• pp.31-39
• /
• 2021

In this study, the fiber blending ratio and strain rate effect on the tensile properties synergy effect of hybrid fiber reinforced cement composite was evaluated. Hooked steel fiber(HSF) and smooth steel fiber(SSF) were used for reinforcing fiber. The fiber blending ratio of HSF+SSF were 1.5+0.5, 1.0+1.0 and 0.5+1.5vol.%. As a results, in the cement composite(HSF2.0) reinforced with HSF, as the strain rate increases, the tensile stress sharply decreased after the peak stress because of the decrease in the number of straightened pull-out fibers by increase of micro cracks in the matrix around HSF. When 0.5 vol.% of SSF was mixed, the micro cracks was effectively controlled at the static rate, but it was not effective in controlling micro cracks and improving the pull-out resistance of HSF at the high rate. On the other hand, the specimen(HSF1.0SSF1.0) in which 1.0vol.% HSF and 1.0vol.% SSF were mixed, each fibers controls against micro and macro cracks, and SSF improves the pull-out resistance of HSF effectively. Thus, the fiber blending effect of the strain capacity and energy absorption capacity was significantly increased at the high rate, and it showed the highest dynamic increase factor of the tensile strength, strain capacity and peak toughness. On the other hand, the incorporation of 1.5 vol.% SSF increases the number of fibers in the matrix and improves the pull-out resistance of HSF, resulting in the highest fiber blending effect of tensile strength and softening toughness. But as a low volume fraction of HSF which controlling macro crack, it was not effective for synergy of strain capacity and peak toughness.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.3
• /
• pp.21-29
• /
• 2023

In this study, the stress characteristics of temporary fixed steel rods were analyzed in the "temporary fixing system using internal prestressing tension", which is mainly applied to the construction of superstructures by FCM. It was difficult to confirm the changes in initial tensile force in this system because the steel rod was internally connected to the pier and the PSC BOX. Therefore, measurement was performed before and after the completion of each segment using an FBG sensor to measure the change in the micro length of the steel rod. The results of the analysis showed that 75% to 90% of the maximum vertical contraction of the steel rod that occurred until the completion of the cantilever segment occurred in the fixing ~ 1segment, and the maximum loss of initial prestressing force was 39%. Such excessive loss of tension force to 1 segment means that tension is needed to improve the precision of construction during the fixation, and re-tension is needed to secure stability for conduction of cantilever segments after the completion of 1segment. In the 2 ~ last segment, the stress of the steel rod decreased gradually, and in the summer, the decrease in stress tended to partially recover due to the increase in the length of the steel rod corresponding to the increase in the vertical volume of PSC BOX. The dominant factor in the stress change in 2~ last segment in this phenomenon is judged to be the change in the length of the steel rod according to the temperature. Unlike the change in length, the relaxation was 1.2-2.7%, which was mostly offset by the opposite stress corresponding to the temperature stress. Therefore, a plan was proposed to improve the internal stress, such as adjusting the fixation time.