• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1567-1572
• /
• 2012

An IPC(instrument panel Cluster) is a useful device that provides driving information to the driver. The information includes the vehicle speed, RPM, mileage, etc. The traditional IPC has been mostly implemented with mechanical technique. According to increment of needs for the convenience of IPC by user, the IPC must provide graphical interface and efficient driving information. Also the user-friendly IPC is needed by drivers. Thus flexible and robust software structure and development methods are required in order to develop IPC. In this paper, we propose software architecture and design method for the IPC using modeling method. We use MVC model and UML to model software architecture because they have flexible and robust characteristics. We can develop the various forms of information screen by separating views from model by using state diagram and class diagram in UML. Through this, the cost saving and ease of maintenance can be expected. The development time and cost can be reduced by using proposed method.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1321-1326
• /
• 2012

An IPC(instrument panel Cluster) is a useful device that provides driving information to the driver. The information includes the vehicle speed, RPM, mileage, etc. The traditional IPC has been mostly implemented with mechanical technique. According to increment of needs for the convenience of IPC by user, the IPC must provide graphical interface and efficient driving information. Also the user-friendly IPC is needed by drivers. Thus flexible and robust software structure and development methods are required in order to develop IPC. In this paper, we propose software architecture and design method for the IPC using modeling method. We use MVC model and UML to model software architecture because they have flexible and robust characteristics. We can develop the various forms of information screen by separating views from model by using state diagram and class diagram in UML. Through this, the cost saving and ease of maintenance can be expected. The development time and cost can be reduced by using proposed method.

• Geophysics and Geophysical Exploration
• /
• v.22 no.3
• /
• pp.160-167
• /
• 2019

Resistivity inversion result may be distorted if the seepage line fluctuation within central core with the change of reservoir water level as well as the conductivity of the reservoir water is not taken into consideration because the reservoir dike is composed of three-dimensional (3D) resistivity structure. Consequently, to accurately analyze the resistivity changes inside the reservoir dike according to the change of reservoir water level, 3D electrical resistivity modeling for the 2D survey line considering topography and physical properties of dam components was carried out. In addition, 2D inversion was performed with the simulated 2D resistivity data for a given 3D model in order to compare it with the inversion result of real field data. For 283 reservoirs in Korea, 2D inversion results for the simulated 2D data and field 2D resistivity data were compared. Finally, the reservoirs with an inversion ratio of 50% or less were selected as reservoirs that require further precise investigation.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.2
• /
• pp.367-375
• /
• 2021

This study aimed to identify the knowledge structure of researches on 'untact' and derived implications for directions for the studies using text mining. The study included network analysis and topic modelling of keywords and abstracts from 171 thesis published until October 2020. Centrality analysis showed that 'untact' studies had been focused on service, usage, consumption, technology and online. From the topic modelling, 6 topics such as 'COVID-19 and socio-technological change', 'needs and utilization of education contents', 'technology and service for user convenience', 'product marketing and sales', 'service design of the company', 'influence factors of usage and consumption' were extracted. Keywords that connect each topic were technology, service, usage, consumption, needs and factor. Exploratory analysis of 'untact' researches using text mining provides useful results for development of 'untact' studies.

• Proceedings of the KAIS Fall Conference
• /
• 2007.05a
• /
• pp.123-125
• /
• 2007

본 논문에서는 유한한 유전체 격자구조에 수직으로 입사되는 전자기파가 갖는 유효 굴절율을 구하고자 한다. 유전체 격자구조를 다층구조로 모델링하여 모드에 따른 전파상수를 계산하면 주어진 주파수에 따른 유효 굴절율을 계산할 수 있다. 다층구조에서 유효 굴절율을 계산을 응용하면 유전체 모양이나 구조에 따른 유효굴절율을 계산할 수 있으며 주파수 선택특성이나 도파관등에 진행모드 계산에 도움이 될 것으로 사료된다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.2
• /
• pp.93-100
• /
• 2022

The collision behaviors of the tripod and jacket structures, which are considered as support structures for offshore wind towers at the Southwest sea of Korea, were compared by nonlinear dynamic analysis. These structures, designed for the 3 MW capacity of the wind towers, were modeled using shell elements with nonlinear behaviors, and the tower structure including the nacelle, was modeled by beam and mass elements with elastic materials. The mass of the tripod structure was approximately 1.66 times that of the jacket structure. A barge and commercial ship were modeled as the collision vessel. To consider the tidal conditions in the region, the collision levels were varied from -3.5 m to 3.5 m of the mean sea level. In addition, the collision behaviors were evaluated as increasing the minimum collision energy at the collision speed (=2.6 m/s) of each vessel by four times, respectively. Accordingly, the plastic energy dissipation ratios of the vessel were increased as the stiffness of collision region. The deformations in the wind tower occurred from vibration to collapse of conditions. The tripod structure demonstrated more collision resistance than the jacket structure. This is considered to be due to the concentrated centralized rigidity and amount of steel utilized.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.1
• /
• pp.51-58
• /
• 2021

In this paper, a multi-scale finite element (FE) modeling methodology for three-dimensional (3D) needle-punched (NP) C/SiC with a complex microstructure is presented. The variations of the material properties induced by the needle-punching process and complex geometrical features could pose challenges when estimating the material behavior. For considering these features of composites, a 3D microscopic FE approach is introduced based on micro-CT technology to produce a 3D high fidelity FE model. The image processing techniques of micro-CT are utilized to generate discrete-gray images and reconstruct the high fidelity model. Furthermore, a subcell modeling technique is developed for the 3D NP C/SiC based on the high fidelity FE model to expand to the macro-scale structural problem. A numerical homogenization approach under periodic boundary conditions (PBCs) is employed to estimate the equivalent behavior of the high fidelity model and effective properties of subcell components, considering geometry continuity effects. For verification, proposed models compare excellently with experimental results for the mechanical behavior of tensile, shear, and bending under static loading conditions.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.4
• /
• pp.102-110
• /
• 2009

In this paper, we propose an object detection method for real-time in infrared (IR) images and PowerPC (PPC) and H/W design based on field programmable gate array (FPGA). An open H/W architecture has the advantages, such as easy transplantation of HW and S/W, support of compatibility and scalability for specification of current and previous versions, common module design using standardized design, and convenience of management and maintenance. Proposed background modeling for an open H/W architecture design decreases size of search area to construct a sparse block template of search area in IR images. We also apply to compensate for motion compensation when image moves in previous and current frames of IR sensor. Separation method of background and objects apply to adaptive values through time analysis of pixel intensity. Method of clutter reduction to appear near separated objects applies to median filter. Methods of background modeling, object detection, median filter, labeling, merge in the design embedded system execute in PFC processor. Based on experimental results, proposed method showed real-time object detection through global motion compensation and background modeling in the proposed embedded system.

• The Journal of the Korea Contents Association
• /
• v.12 no.1
• /
• pp.103-111
• /
• 2012

This paper is a basic study for making a system that can predict the success and failure of entertainment contents at the initial stage of production. It proposes the user's emotion modeling of dynamic narrative on entertainment contents. To make this possible, 1) dynamic narrative emotion model is proposed based on theoretical research of narrative structure and cognitive emotion model. 2) configuring the emotion types and emotion value, proposed model of three emotion parameter(desire, expectation, emotion type) are derived. 3)To measure user's emotion in each story event of dynamic narrative, cognitive behavior and description of user(film, game) is established. The earlier studies on the user research of conceptual, analytic approach is aimed of predicting on review of the media and user's attitude, and consequently these results is delineated purely descriptive. In contrast, this paper is proposed the method of user's emotion modeling on dynamic narrative. It would be able to contributed to the emotional evaluation of entertainment contents using specific information.

• Journal of Cadastre & Land InformatiX
• /
• v.44 no.2
• /
• pp.91-101
• /
• 2014

This study tried to create 3D object with LOD3 level for Korean traditional house which is atypical structure, upload to spatial information open platform and confirm the possibility for creating 3D-map. And this study tried to create 3D model for Korean traditional house based on BIM, performed 3D modeling for interior spatial information of Korean traditional house and confirm the development possibility of 3D modeling and visualization method of Korean traditional house. Also this study present the possibility of LOD4 level visualization for spatial information of Korean traditional house which is atypical structure, but 3D object with LOD4 level can't be uploaded to Spatial Information Open Platform currently, cause by data volume limitation of spatial information open platform.