• Journal of the Korean Society for Railway
• /
• v.15 no.6
• /
• pp.609-615
• /
• 2012

TPS (Train Performance Simulation) based on ATO (Automatic Train Operation) is required for driverless LRT (Light Rail Transit) operation plan instead of typical TPS based on driver operation. In this paper, new TPS model using ATO pattern is proposed and compared with the automatic train operation result in a test line of Seoul Metro Line 6 and in a whole line of Busan-Gimhae LRT. The actual ATO pattern can be very accurately simulated by new TPS model with the introduction of 4 parameters such as commercial braking rate, jerk, station stop profile and grade converted distance. The commercial scheduled time for driverless automatic train operation can be proposed to have "Fast" mode TPS trip time plus 3 seconds/km margin recommended by Korean standard LRT specification in this paper.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.10a
• /
• pp.335-336
• /
• 2008

최근 ITS(Intelligent Transportation Systems)의 보급으로 개인의 기-종점 간 통행시간에 많은 비용절감을 가져왔다. 지금까지의 주요 최단경로알고리즘은 네트워크의 기-종점(Origin-Destination) 거리 간 최단 통행시간을 고려하여 연구되어 왔다. 하지만, 최근 대두되는 고유가 시대의 진입과 더불어 환경에 대한 인식이 높아짐에 따라 기-종점 간 통행시간만을 고려하던 기존의 방법들에서 벗어나 추가적인 요인들의 고려 필요성이 증대되고 있다. 따라서 본 연구에서는 지리정보시스템을 이용한 환경오염을 최소화하는 친환경 최단경로 탐색방법 개발을 제안하고자 한다. 이를 위하여 3D 좌표정보 도로를 활용하여, 도로구배 조건에 따른 배출가스의 증감율을 환경오염편익으로 구분하고, 이를 사회적비용으로 환산하여, 경로탐색의 추가적인 요소로 반영하였다.

• Korean Journal of Heritage: History & Science
• /
• v.43 no.1
• /
• pp.118-127
• /
• 2010

From January to December of 2006, the distribution characteristics and density of otter(Lutra lutra ) feces were studied at Seosi stream, a tributary of Seomjin river, in Gurye-gun, Jeollanam-do. During the study period, the number of excretion site, old feces, and new feces were observed six times in seven habitat sections of the stream. As the result, 222 excretion sites, 662 old feces (converts to 718 per 60 days), and 364 new feces were observed. All of these were observed the most in January. Mean density per 500m was 26.9 for excretion sites, 88.6 for old feces, and 44.4 for new feces. Monthly changes in the number of excretion site and feces per section showed that otters have no specific preference to a habitat section of Seosi stream over the year.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.13 no.1
• /
• pp.2206-2217
• /
• 1971

Spillway and discharge channel of reservoirs require the Control of Large volume of water under high pressure. The energies at the downstream end of spillway or discharge channel are tremendous. Therefore, Some means of expending the energy of the high-velocity flow is required to prevent scour of the riverbed, minimize erosion, and prevent undermining structures or dam it self. This may be accomplished by Constructing an energy dissipator at the downstream end of spillway or discharge channel disigned to dissipated the excessive energy and establish safe flow Condition in the outlet channel. There are many types of energy dissipators, stilling basins are the most familar energy dissipator. In the stilling basin, most energies are dissipated by hydraulic jump. stilling basins have some length to cover hydraulic jump length. So stilling basins require much concrete works and high construction cost. Flip bucket type energy dissipators require less construction cost. If the streambed is composed of firm rock and it is certain that the scour will not progress upstream to the extent that the safety of the structure might be endangered, flip backet type energy dissipators are the most recommendable one. Following items are tested and studied with bucket radius, $R=7h_2$,(medium of $4h_2{\geqq}R{\geqq}10h_2$). 1. Allowable upstream channel slop of bucket. 2. Adequate bucket lip angle for good performance of flip bucket. Also followings are reviwed. 1. Scour by jet flow. 2. Negative pressure distribution and air movement below nappe flow. From the test and study, following results were obtained. 1. Upstream channel slope of bucket (S=H/L) should be 0.25<H/L<0.75 for good performance of flip bucket. 2. Adequated lip angle $30^{\circ}{\sim}40^{\circ}$ are more reliable than $20^{\circ}{\sim}30^{\circ}$ for the safety of structures.