• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.12
• /
• pp.1678-1682
• /
• 2000

In this article, the concept of gradient thickness is further extended to characterize the gradient behavior of the thermal and momentum boundary layer near a solid surface. The gradient thickness can replace the use of the conventional of the Nusselt and Reynolds numbers in terms of the gradient thickness provides a much easier grasp of the physical and practical meaning of the processes involved. Although there is no urgent need to discard the concept of the conventional convective heat transfer coefficient, the concept of the gradient thickness is believed to serve an efficient tool in helping students understand physics.

• Solar Energy
• /
• v.12 no.3
• /
• pp.107-115
• /
• 1992

An experiment was performed to study solidification of binary mixture with double-diffusive convection in the liquid. A rectangular enclosure was filled with ammonium chloridewater solution. The phase change and convection process were studied through shadowgraph. Becasuse of the double-diffusive convection, the temperature field and concentration filed were stratified very rapidly. Correlation between solidified mass fraction and the dimensionless numbers was found; solidified mass concentration can be expressed as a linear function of $(Ste{\cdot}Ra^{1/4})^{2-Ste}{\cdot}Fo^{1/2}$.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1999.04a
• /
• pp.23-23
• /
• 1999

후류손실을 가지는 혼합 전단층에 대하여 밀도변화가 없는 유동 및 밀도변화가 있는 유동의 선형 불안정성 해석을 수행하였다. 기본 유동의 속도장 및 밀도장은 tanh 함수를 사용하였으며, Gaussian 형태의 해석적 함수를 사용하여 두 유동을 분리시키는 평판 바로 다음에 존재하는 후류 손실 유동을 포함시켰다. 공간적 선형 불안정성 해석을 수행하여 불안정성 모드의 성장률과 파장속도를 주파수의 함수로서 구하였다. 해석 결과로부터 후류 손실을 가지는 혼합층은 sinuous 모드와 varicose 모드의 두 개의 불안정성 모드를 가짐을 알았다. 밀도가 균일한 경우에는 varicose 모드보다 sinuous 모드가 지배적이다. 밀도가 균일한 경우에는 varicose 모드보다 sinuous 모드가 지배적이다. 밀도구배가 존재하나 빠른 자유유동의 밀도가 높은 경우에는 밀도가 균일한 경우와 마찬가지로 sinuous 모드가 지배적인 모드가 된다. 그러나 느린 자유 유동의 밀도가 높은 경우에는 밀도장의 두께가 속도장의 두께보다 상대적으로 얇아지면 varicose 모드가 sinuous 모드보다 더욱 불안정하여질 수 있다. varicose 모드와 sinuous 모드의 성장률이 비슷한 밀도장의 두께에서는 두 불안정성 모드가 주파수 변화에 따라 분지 되어지는 경향을 보인다.

• International Journal of Highway Engineering
• /
• v.10 no.2
• /
• pp.145-157
• /
• 2008

Load transfer efficiency (LTE) reflects the structural performance of doweled and undoweled joints of Jointed Concrete Pavement (JCP). A 3-dimensional (3-D) model of JCP was built using ABAQUS software in this study. Three concrete slabs were placed on bonded sublayers composed of a base and subgrade. Spring elements were used to connect the adjacent slabs at joints. Different spring constants were input to the model to simulate different joint stiffness of the concrete pavement. The LTE of the joint increased with an increase of the spring constant. The effects of material properties and geometric shape on the behavior of JCP were analyzed using different elastic modulus and thickness of the slab and base in the modeling. The results showed the elastic modulus of the subgrade affected the behavior of the slab and LTE more than that of the base and the thickness of the slab and base. The effects of a negative temperature gradient on the behavior of the slab and LTE were more than that of positive and zero temperature gradients. Joints with low stiffness were more sensitive to the temperature gradient of the slab.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.9-13
• /
• 2001

In the present study, the friction coefficients (Fanning and Moody coefficients) and the Nusselt number is reviewed from an educational point of view. It is discussed that these dimensionless numbers can be treated with two lengh scales. Also, the similarity between the momentum and heat transfer is discussed based on the length scales.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2001.11a
• /
• pp.36-44
• /
• 2001

The effects of various tripping structures on turbulent boundary layer subjected to adverse pressure gradient were examined. The profiles are compared to zero pressure gradient and adverse pressure gradient. The increases of tripping structures of height, k are affects almost flow parameter included velocity fluctuation, skin friction coefficient and turbulent boundary thickness.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.5
• /
• pp.483-490
• /
• 2008

Minimization of nozzle induces many flow losses in micro-propulsion system. In this study, we studied about thermal transpiration based micro propulsion system to overcome these losses. Thermal transpiration device(Knudsen pump) having no moving parts can self-pump the gaseous propellant by temperature gradient only (cold to hot). We designed, fabricated the Knudsen pump and analyzed pressure gradient efficiency of membrane according to Knudsen number under vacuum condition. Experimental results showed that thick membranes are more effective than thin membranes in transition flow regime, and pressure gradient efficiency according to Knudsen number is increased to maximum 82% apart from membrane thickness in free molecular regime.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.92.1-92.1
• /
• 2015

열전소재의 열전성능을 평가하기 위해서는 샘플 내 상하부 온도구배가 필요하다. 하지만 진공챔버 내에서는 대류효과가 제한되어, 1 mm 이하 두께의 얇은 샘플은 상하부 방향으로 온도 구배를 조성하기 어렵다. 온도 구배를 조성하기 위해서는 샘플의 두께 방향을 관통하는 열유속이 필요하며, 진공 분위기에서 열유속을 조성하기 위해서는 히터뿐만 아니라 별도의 열배출기가 요구된다. 본 연구에서는 열전특성 측정 장비 내 수냉식 열배출기의 설계를 위해, 열배출기의 층수를 달리하며 열전달거동을 수치해석적인 방법으로 연구하였다. 열배출기의 층수에 따른 영향을 평가하기 위해서 동일한 채널길이를 유지시키면서 층수를 달리하는 기하학적인 구조들을 설계하였다. 수치해석을 용이하게 진행하기 위해, 열배출기의 형태는 단순한 bar 형태를 가진 1-5층의 다층 구조 로 설계하였다. 열배출기들 각각의 열전달 효율을 평가하기 위해, 수냉식 열배출기의 열배출량에 가장 큰 영향을 미치는 질량유량을 0.1-1 g/s로 변화 시키면서 열전달 거동을 확인하였다. 또한 냉각수의 기화 현상을 방지하기 위해 발열체의 온도를 290-370 K로 바꿔 가며 열전달 거동을 확인하였다. 수치 해석결과, 5층의 열배출기가 최대 120 W/cm2 로 높은 단위면적당 열배출량을 가지는 것을 확인하였으나, 열배출기 전체의 열배출량을 기준으로하는 열배출효율은 0.6 정도로 낮은 효율을 가짐을 확인하였다. 반면에 3층의 열배출기의 경우, 열배출 효율이 0.8에 달하며, 2층의 열배출기 보다 열배출 효율이 좋다는 것을 확인할 수 있었다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.1
• /
• pp.7-11
• /
• 2020

Carbon solubility on the paste deposition methods in the carbon-doped TiZrN coating was investigated in terms of lattice distortion and atomic concentration. After depositing the carbon paste by the dip coating, spin coating and screen printing, the laser was ablated to form the carbon gradient layer. Thickness and the concentration of doped carbon depended on the paste deposition method. Crystal structure analysis indicated that more lattice distortion occurred when coating layers were doped with spin coating and screen printing than when coating layers were doped with dip coating. The XPS depth profile showed that the thickness of carbon gradient layer by dip coating was about 30 nm, spin coating and screen printing are approximately 100 nm, formed more gradient layer. The hardness before laser carburization was about 30 GPa, and the hardness of 31 GPa with dip coating and 37 GPa with spin coating and screen printing. It was indicated that paste deposition methods for laser carburization contributed to lattice distortion and gradient layer.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.21 no.2
• /
• pp.137-141
• /
• 1985

In this paper, the author investigate viscous effects on the characteristics of TP620 hydrofoil. The pressure distribution on the foil section in non-cavitating flow should be considered its characteristics of displacement thickness due to viscous effects. Theoretical potential theory, which neglects viscous effects do not agree with this analysis, especially at leading edge region of the foil. And, the efficiency of TP620 hydrofoil considering viscous effects is a little lower than that of the foil, which neglected viscous effects.