• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.2
• /
• pp.93-101
• /
• 2014

Purpose: The aim of this study is to investigate the typical shape of the curve of Spee in Korean and analyze the curve of Spee according to gender, age, and left and right. Materials and Methods: Among the patient of Wonkwang University Sanbon Dental Hospital taking cone beam computerized tomography, the images of 500 Koreans (311 males and 189 females) who qualifies the criteria of this study were selected and their curve of Spee were analysed in sagittal plane. Results: The mean radius of curve of Spee in Korean was 91.4 mm. There was statistically significant difference between male (94.6 mm) and female (86.1 mm) by gender, but not significant differences by age and between right and left side. Conclusion: Within the limitation of this study, the smaller radius (91.4 mm) of Korean than the 4-inch (101.6 mm) value advocated by Monson was meaned that it would be need to reconsider the application of the curve of Spee in all cases when occlusal plane is reconstructed in Korean.

• Korean Journal of Optics and Photonics
• /
• v.4 no.1
• /
• pp.9-14
• /
• 1993

We chose Bessel beamu[$J_o(ar)}$)l in order to investigate image forming property of the optical system with combined filter of amplitude and phase(CFAP). This paper investigated numerically the influence of number of nodes of these beams on the PSF, encircled energy(E), transmission ratio(TR), gain((;) for an aberrated(1aberration-free) optical system. These results showed that the property of PSF differ considerably from the one of the existing amplitude filter and that Bessel beam has super compensating effect for an optical system with spherical aberration. Particularly, the Bessel beam has less the size of central spot than the radius of Airy disk, this result can therefore be applied to the fabrication of semiconductor device.

• Korean Journal of Optics and Photonics
• /
• v.10 no.6
• /
• pp.443-447
• /
• 1999

To investigate the effect of a shaded apodizer on the read-out signal in an optical disc system, we consider the is apodizer in which the amplitude transmittance decreases gradually from the center of pupil toward its edge and the iH apodizer in which the amplitude transmittance increases gradually from the center of pupil toward its edge, using the scalar diffraction theory. We also consider the bump shapes which are a cylindric, a semi-conic, and a conic bump, and bump height which is given by $\lambda/4$ and occurs to the phase change $(\pi)$). The read-out signal of is apodizer increases from S = 0 upto maximum value, and then decreases for increasingly larger values of bOo While the iH apodizer has two maximum values. When an optical disc system has a spherical aberration $(W_{40}=0.5\lambda)$, the maximum read-OUt signal of is apodizer is higher than that of iv apodizer which has no apodizer.odizer.

• Journal of Korean Ophthalmic Optics Society
• /
• v.9 no.2
• /
• pp.211-221
• /
• 2004

The purpose of this study is to evaluate the distribution and change of curvature of the anterior corneal surface with age in emmetropia. 504 subjects who have emmetroia with good naked vision of at least 0.6-1.0 (spherical equivalent: +0.75D- -0.75D) participated in this study. The 504 subjects into 8 groups with 10 year interval from 3-year to 83-year, and their corneal curvatures were analyzed using manual keratometry. The results are as follows. In individual analysis: First, regression analysis of corneal curvature radius with age has given an equation: Y = -0.003x + 7.796 (r = -0.26). The average corneal curvature radii was measured to be $7.68{\pm}0.25mm$ at 38.3-year and range was 6.98-8.54 mm. Second, frequency of corneal curvature radius were obtained in 36% between 7.61 and 7.80 mm, 78% between 7.41 and 8.00 mm, 96% between 7.21 and 8.20 mm, 100% between 6.98 and 8.54 mm. Third, as for the comparison of corneal curvature radius with respect to sex, The mean value of male (n = 304, mean: 37.6-year $7.72{\pm}0.24mm$, Range: 7.09-8.54 mm) is larger than that of female (n = 200, mean: 39.3-year $7.62{\pm}0.24mm$, Range: 6.98-8.42 mm) by 0.1mm (p<0.01). In groups analysis: First, regression analysis of corneal curvature radius with age has given an equation: $Y=-0.0066x^2+0.0227x+7.7282$ (r = -0.90). Second, vertical and horizontal curvature radius decreased with age (p < 0.01). Especially the decrease of horizontal curvature radius were more pronounced than the decrease of vertical (horizontal:10-70 age group: 0.38 mm decrease, vertical:10-70 age group: 0.20 mm decrease). Third, difference between steep and flat meridian (astigmatism) progressively decreased with age. (low age group:0.18 mm difference, high age group: 0.08 mm difference). Fourth, the corneal curvature radius of male was larger than female's in total groups(p < 0.01). Consequently, the change of corneal curvature radius with age progressively decreased in all conditions (mean, vertical, horizontal, male, and female) and this change was more outstanding in horizontal rather than in vertical.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.82.3-83
• /
• 2015

비축 반사경의 DTM (Diamond Turning Machine) 가공을 하기 전에는 시간 및 비용의 절감을 위해 CNC(Computerized Numerically Controlled Machine Tools)를 이용하여 비축면의 곡률반경과 가장 유사한 형태의 구면으로 1차 가공 후 3축 이상을 제어할 수 있는 MC (Machining Center)를 이용하여 근사한 비축면을 먼저 가공한다. 이후 DTM으로 광학계에서 요구하는 형상 정밀도 및 표면 조도를 만족하는 비축면을 완성한다. 하지만 비축면을 가공하는 경우, 일반적인 축 대칭 광학계와 달리 가공장비에 장착된 기상계측기를 사용할 수 없기 때문에 외부 장비를 이용하여 반사경 표면을 측정해야한다. 이때 측정과 가공 단계 사이에서 정렬오차가 발생하여 반사경의 형상 정밀도 향상을 위한 보상가공에 어려움이 있다. 본 연구에서는 비축면 반사경의 가공과 측정 과정 사이에 발생하는 정렬오차를 최소화 할 수 있는 DTM 가공용 지그를 설계 및 제작하였다. 또, DTM으로 가공한 반사경의 측정값과 설계값을 비교하여 알루미늄 반사경의 광학 성능을 평가하였다. 이러한 성능 평가 결과는 비축면 반사경의 형상 보상가공을 위한 모델링 방법을 고안하는데에 있어 핵심 자료가 될 것이다.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05b
• /
• pp.890-893
• /
• 2010

알코올 섭취 후 발생하는 해부생리학적 변화가 눈의 일시적인 근시화에 미치는 영향을 알아보고자 하였다. 평균 24.5${\pm}$1.5세의 남자 8명(16 안)을 대상으로 0.42 g/kg의 알코올을 30분 간에 걸쳐 섭취토록 한 다음, 알코올 섭취 1시간, 4시간, 24시간 후의 교정굴절력, 각막곡률반경과 두께, 동공직경, 안압, 그리고 안구축의 길이변화를 측정하여 알코올 섭취 전과 비교하였다. 알코올 섭취 1시간 후에 알코올 섭취 전과 비교하여 호흡 중 알코올 농도가 가장 높았고(p<0.001), 교정굴절력의 구면 (-)굴절력 증가(p<0.05), 동공 크기의 감소(p<0.05), 안압의 하강(p<0.001), 그리고 안구축의 길이 증가가 나타났다. 알코올 섭취 4시간 후에도 모든 측정값들이 섭취 1시간 후와 동일한 경향이었다. 그러나 알코올 섭취 24시간 후에는 알코올 섭취 전과 비교하여 의의있는 변화를 보이지 않았다. 알코올 섭취로 인한 일시적인 근시화는 안압하강과 안구축의 길이변화와 관련성이 있을 것으로 판단된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2D
• /
• pp.323-334
• /
• 2011

In this study, we performed the residual geoid modeling using the FFT and LSC methods in context of application of R-R (Remove and Restore) technique as a general technique for gravimetric geoid model in order to propose the effective way of geoid determination in Korea. For this, a number of data compiled for residual geoid modeling by the multi-band spherical FFT method with Stoke's formula and LSC method as known as statistical method. The geometric geoidal heights obtained from 503 GPS/Levelling data were used for inducing the various elements and proper computation process which should be considered for improving the accuracy of residual geoid modeling. Finally, we statistically compared the results of residual geoid heights between FFT and LSC methods and reviewed then the proper way of residual geoid modeling to the region of Korea. As the results of comparison, LSC method is not suitable for residual geoid modeling in Korea due to the noise and lack of gravity observations and the effects of local characteristics, while FFT method by applying Stokes' integral with proper cap size and modified kernel which provides the better accuracy of residual geoid heights up to 10 cm more than those of LSC method.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.254.1-254.1
• /
• 2013

현재의 나노기술 및 부품은 나노미터 이하의 초고분해능을 요구하면서도 나노미터 이하의 정확도로 가공할 수 있는 기술을 요구하고 있다. 이온현미경은 위 두 요구조건을 만족하는 차세대 현미경으로써 초고분해능 이미징과 함께 기존의 갈륨이온을 사용하는 집속이온빔 장치보다 네온가스등을 이용하여 더 정밀하게 에칭 및 스퍼터링을 할 수 있다. 이온현미경은 전자현미경에 비해 더 깊은 초점심도를 갖으며, 색수차와 구면수차에 비교적 둔감하고 전자에 비해 무거운 이온의 무게 때문에 짧은 파장을 갖는 특징을 가지고 있다. 이와 같은 특징을 이용하면 전자현미경과 다른 여러 특징과 장점을 갖는 고분해능의 현미경을 제작할 수 있다. 이와 같이 차세대 현미경으로 주목받는 이온현미경의 중요한 부분인 이온총은 현재 가스장 이온 소스 방법으로 대부분 개발되고 있다. 가스장 이온 소스는 1950년대에 E. W. Muller에 의해 개발된 전계 이온 현미경(Field Ion Microscope)에서 응용된 방법으로 뾰족한 탐침에서의 가스 이온화를 기반으로 한다. 가장 보편적으로 사용되는 재질은 텅스텐으로 수십 nm 정도의 곡률 반경을 갖도록 제작하고 초고진공에 설치하여 강한 양전압을 인가함과 동시에 가스를 팁 주변에 넣어주면 팁표면에서 이온빔이 발생하게 된다. 본 연구에서는 위와 같이 차세대 나노장비로써 주목받는 이온현미경의 특징에 대해 소개하고, 특히 이온현미경의 이온총 원천기술 개발을 위해 연구하고 있는 가스장 이온 소스의 특성에 대해 소개한다. 수소, 네온, 헬륨의 전계 이온현미경과 함께 생성된 이온빔의 안정도 및 각전류 밀도를 계산하여 실제 이온총으로의 적용 가능성에 대해 보여준다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.3
• /
• pp.21-28
• /
• 2016

We propose an adaptive scheme of a differential codebook for temporally correlated channels. And the codeword entries of the propose codebook are selected among the set of M-PSK constellations - the values of M proposed in this paper are 8, 16, or 32. Firstly, we analyze mathematically how the optimal spherical cap radius of the proposed codebook is tracked. Then, we explain the practical implementation of the proposed adaptive method. Practically, some candidate differential codebooks we propose in this paper can be switched according to the temporal correlation coefficients of wireless channels in the proposed scheme. Monte-Carlo simulations demonstrate that the achievable throughput performance employing the proposed codebook is always superior to those of the differential codebooks employing M-PSK constellations and non-adaptive differential codebooks with the same amount of feedback information.

• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.1
• /
• pp.67-74
• /
• 2012

Purpose: The purpose of this study to evaluate visual acuity and refractive state and measure and analyze the components of eye's optical system in children and teenagers. Methods: With subjects of 124 (230 eyes) children and teenagers who had no eye diseases, correlation between the correlation between refractive errors and component's of eye's optical system was investigated. The spherical equivalent power of cycloplegic clinical refraction or manifest clinical refraction(SE), corneal power(CP), corneal radius(CR), axial length(AL), anterior chamber depth(ACD) and axial length to corneal radius (AL/CR) ratio were measured and analysed. Results: the SE was negatively correlated with the AL(r = -0.80, p = 0.00), the ACD(r = -0.35, p = 0.00) and the CR(r = -0.11, p=0.00) and positively correlated with the CP(r = +0.11, p=0.00). The AL was positively correlated with the AL/CR ratio (r = +0.84, p = 0.00), the ACD(r = +0.47, p=0.00) and the CR(r = +0.38, p = 0.00) and negatively correlated with the CP(r = -0.38, p=0.00). The CR was negatively correlated with CP(r = -1.00, p = 0.00), the AL/CR ratio(r = -0.19, p = 0.00) and the ACD(r = -0.06, p = 0.39). The CP was positively correlated with the AL/CR ratio(r = +0.19, p = 0.00) and the ACD(r = +0.06, p = 0.39). The ACD was positively correlated with the AL/CR ratio(r = 0.53, p = 0.00). Conclusions: the highest change of refractive errors was shown that the AL/CR ratio was a very important indicator for diagnosing the refractive errors of the children and teenagers.