• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.359-362
• /
• 2006

In this paper, hole expanding tests are carried out in order to identify the effect of the hole process condition on the hole expanding ratio. Specimens with two different hole conditions are prepared: one is produced with punching process; and the other is reamed after punching to get smoother hole surface. The experimental results show that the facture mechanism and the hole expanding ratio are quite different with respect to the hole condition. The hole expanding ratio of a punched specimen is much smaller than that of a reamed one due to the difference of surface roughness and internal defects. For the thorough investigation of those effects, tensile tests of a specimen with a hole are performed. The fracture strain is obtained with different hole conditions and a finite element analysis of the hole flanging process carried out. The experimental results are confirmed and reevaluated by finite element analysis of the hole flanging process with ductile fracture criterion proposed.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.362-365
• /
• 2005

The hub hole is usually formed with a flanging process followed by a blanking process of a ]tole. Since the hole is made by blanking, the blanked surface is so rough that the formability in the region is rather poor. The emerging task is to identify the formability of the blanked region in the forming simulation and to relate the criterion to the real forming process by experiments. In this paper, hole expansion tests are carried out with respect to various hole conditions to verify the hole condition effect on the hole expansion ratio. The hole of specimens is made by machining or punching. In the case of punching, two different punching clearances are used for making the hole. From the results of test, fracture mechanism of the hole expansion is explained.

• Transactions of Materials Processing
• /
• v.30 no.2
• /
• pp.74-82
• /
• 2021

Stretch-flangeability, which is the ability of sheet steels to be deformed into complex shapes, is a critical formability property in automobile body parts. In this study, the center-hole for hole expansion test, which is normally used to evaluate the stretch-flangeability of sheet steels, was prepared by both punching and electrical discharge machining (EDM) methods. Hole expansion ratio (HER) of punched hole was far lower than the HER of EDM drilled hole because of damage/crack in hole-edge due to punching process. The effect of hole-edge condition on HER was quantified by mechanical, fractographic and geometric factors. Based on these factors, the empirical equation used to determine HER for various sheet steels was derived using non-linear regression.

• Journal of Korea Multimedia Society
• /
• v.9 no.9
• /
• pp.1139-1149
• /
• 2006

This paper describes a novel and efficient algorithm, which extracts focused objects from still images with low depth-of-field (DOF). The algorithm unfolds into four modules. In the first module, a HOS map, in which the spatial distribution of the high-frequency components is represented, is obtained from an input low DOF image [1]. The second module finds OOI candidate by using characteristics of the HOS. Since it is possible to contain some holes in the region, the third module detects and fills them. In order to obtain an OOI, the last module gets rid of background pixels in the OOI candidate. The experimental results show that the proposed method is highly useful in various applications, such as image indexing for content-based retrieval from huge amounts of image database, image analysis for digital cameras, and video analysis for virtual reality, immersive video system, photo-realistic video scene generation and video indexing system.

• Journal of Veterinary Clinics
• /
• v.28 no.1
• /
• pp.7-12
• /
• 2011

This study was performed to evaluate the size and asymmetry of the lateral ventricles in CT images of three different small breed dogs. CT examinations were performed on thirty Yorkshire terriers, malteses, and shihtzu dogs, respectively. The size and asymmetry of their lateral ventricles were evaluated at three different levels of brain, and dogs were categorized on the basis of the percentage of their ventricular height (Vh) to brain height (Bh). Degree of asymmetry was also categorized based on the rVh (ratio of right and left ventricular heights) as normal (rVh < 1.5), mild (1.5 < rVh < 2.0), or severe (2.0 < rVh). Clinically insignificant ventricular dilation was common in these breed dogs. However, severe asymmetry was not presented in clinically normal dogs. We suggested 11 mm as an upper limit of ventricular size in normal small breed dogs.

• The Korean Journal of Pesticide Science
• /
• v.6 no.2
• /
• pp.96-104
• /
• 2002

This study was carried out to investigate cytotoxicity of paraquat on NIH 3T3 fibroblasts, toxicity of paraquat and compensatory effects of 3-methylcholanthrene (3-MC) on the rat lung. In order to conduct MIT [3-(4,5-Dimethylthiazol-2-yl) -2,5-diphenyl -2H-tetrazolium-bromide] and NR (Neutral red) assay, the $5.0{\times}10^4cell/ml$ of NIH 3T3 fibroblast in each well of 24 multi-dish were cultured. After 24 hours, the cells were treated with solution of paraquat (1, 25, 50 and $100{\mu}M$ respectively). After the NIH 3T3 fibroblast of all groups were cultured in same condition for 48 hours. MIT and NR assay were performed to evaluate the cytotoxicity of cell organelles. $MTT_{50}\;and\;NR_{50}$ of paraquat were $1668.97{\mu}M\;and\;1030.85{\mu}M$, respectively. These $IC_{50}$ of Paraquat were decided as a low cytotoxicity by Borenfreund and Puemer (1984). In order to observe the toxicity and compensatory effects of paraquat on the rat lung, Spraque Dawley male rats were used as experimental animals and were divided into paraquat only treated group and simultaneous application group of paraquat and 3-MC, at 30 min and 1, 3, 6, 12, 24, 48 and 96 hrs interval after each treatment. The animals were sacrificed by decapitation and their or the lungs were immediately removed, immersed in fixatives, and were processed with routine method for light microscopic study. Paraffin sections were stained with H&E and iron hematoxylin of Verhoeff. Under the light microscopy, erythrocytes were full in alveolar capillaries at 3 hrs and congested at 24 hrs after paraquat administration. The great alveolar cells (Type II cell) were increased and mitosis of great alveolar were observed in interalveolar septa. Many lymphocytes, macrophages and polymorphonuclear (PMN) cells were observed in connective tissue surrounding lung tissue and germinal center in lymph follicles of terminal bronchiole. Alveolar macrophages were increased in interalveolar septa and alveoli at 48 hrs. And observed many alveolar macrophages at 96 hrs. In iron hematoxylin stain of Verhoeff, Collagen fiber were increased in respiratory bronchiole, interalveolar septa and alveoli and breath of alveoli, and alveolar pore were broaden. But, in paraquat plus 3-MC treated group, morphological changes were mild in lung tissue. These results indicate that 3-MC has a compensatory effects against toxicity of paraquat by conjugation with oxygen.

• Journal of KIISE:Information Networking
• /
• v.30 no.3
• /
• pp.329-342
• /
• 2003

Most of the existing multicast routing protocols for ad-hoc networks do not take into account the efficiency of the protocol for the cases when there are large number of sources in the multicast group, resulting in either large overhead or poor data delivery ratio when the number of sources is large. In this paper, we propose a multicast routing protocol for ad-hoc networks, which particularly considers the scalability of the protocol in terms of the number of sources in the multicast groups. The proposed protocol designates a set of sources as the core sources. Each core source is a root of each tree that reaches all the destinations of the multicast group. The union of these trees constitutes the data delivery mesh, and each of the non-core sources finds the nearest core source in order to delegate its data delivery. For the efficient operation of the proposed protocol, it is important to have an appropriate number of core sources. Having too many of the core sources incurs excessive control and data packet overhead, whereas having too little of them results in a vulnerable and overloaded data delivery mesh. The data delivery mesh is optimally reconfigured through the periodic control message flooding from the core sources, whereas the connectivity of the mesh is maintained by a persistent local mesh recovery mechanism. The simulation results show that the proposed protocol achieves an efficient multicast communication with high data delivery ratio and low communication overhead compared with the other existing multicast routing protocols when there are multiple sources in the multicast group.

• Journal of Science of Art and Design
• /
• v.9
• /
• pp.5-24
• /
• 2006

Human hunted and picked to survive and a vessel was made naturally to store something being hunted and picket, which was a great invention. In modern times, society changed and development of science gave us convenience in making a vessel and various kinds of store instruments which was made of pure natural material, of new stuff, such as plastic and iron. but human became to be inclined to regress into nature because of problems of environment. We can say that the representative trend is well-being, after all this is a symptom to return to life being persued by predecessors before the science civilization was developed. Ancestors have lived with nature, adapted themselves to it. For examples they have built the house which became to be a part of nature and just like it, and studied a method of storing food to eat for four seasons, then displayed a storagehouse and storage containers everywhere of the house. Now Korean has the custody of kimchi in refrigerator at every house, but our forefathers controled a timing to eat food with studying a method of storage to put to use nature. With hot wind of well-being, Korean food is becoming to be globalized, according to this, concern about the wisdom of progenitors is growing more and more. It's an example that the world shows concern seriously about the pottery, which have stored kimchi for a long time fleshly, in globalization of kimchi. This study have three purposes, the first. checking documents about the development history of pottery which is a kind of ceramic, and then the second, through an scientific experiment, with studying characteristic of pottery being built by the wisdom of ancestors, informing the merit of pottery and necessity to the world, and futhermore, the third, working up the development of close environmental vessels putting to use the characteristic of pottery.