Proceedings of the Korean Vacuum Society Conference
/
2016.02a
/
pp.345.1-345.1
/
2016
구리 피막은 열 및 전기를 잘 전달하는 특성으로 인해 전기 배선이나 Heat Sink 재료 등에 이용되고 있다. 최근에는 전자파 차폐나 FCCL (Flexible Copper Clad Laminate) 등의 피막으로 널리 이용되면서 연속 코팅 및 후막 제조를 위한 고속 소스의 필요성이 증가하고 있다. 연속코팅 설비에 적용하거나 후막을 경제적으로 제조하기 위해서는 정지상태의 기판을 기준으로 시간당 $100{\mu}m$ 이상의 증착 속도가 요구된다. 기존 마그네트론 스퍼터링 소스의 경우 일반적으로 증착율이 시간당 $20{\mu}m$ 이내이며, 고전력을 이용하는 소스의 경우도 $60{\mu}m$를 넘지 못하고 있다. 본 발표에서는 자기장 시뮬레이션을 통해 자석의 배열을 최적화하고 냉각 효율을 고려한 소스 설계를 통해 고속 스퍼터링 소스를 제작하고 그 특성을 평가하였다. 제작된 소스는 구리 코팅을 위한 스퍼터링 공정 조건을 도출하고 다양한 기판에 $20{\mu}m$ 이상의 구리 후막을 코팅하여 미소 형상 및 코팅 조직을 분석하였다.
Proceedings of the Korean Vacuum Society Conference
/
2016.02a
/
pp.319.2-319.2
/
2016
ZrN 코팅은 TiN과 특성이 유사한 옅은 금색의 질화 박막이나 내식성이 우수하여 의료용, 자동차 부품, 항공부품, 장식용으로 적용되고 있다. 스테인레스계 의료용 기구나 생활기구의 항균성 기능이 부여된 표면처리는 아직 널리 보급되고 있지 않아 장식성과 내부식성이 뛰어난ZrN 박막에 구리를 함유시킴으로서 항균성의 변화를 관찰하고자 하였다. 진공 아크 이온플레이팅 방법으로서 ZrN을 성장시키면서 스퍼터링법에 의하여 Cu를 함유시키는 방법으로 실험을 실시하였다. 기재는 SUS 304를 사용하였고, 공정온도 $400^{\circ}C$에서 질소분압 1-5 Pa, 아크전류 90 A의 조건에서 Cu 스퍼터링 타겟의 전류를 1-7A 까지 변화하여 구리함유 ZrN 박막을 합성하였다. 구리 함류량에 따른 XRD를 통한 결정구조분석과 SEM/EDX를 통한 성분변화분석을 실시하였다. 구리함유 박막에 대해서 시간에 따른 대장균을 성장을 분석하여 기재인 SUS304, ZrN, 구리 함유 ZrN에 대한 대장균 항균성을 조사하였다.
The effects of austempering temperature, austenitizing temperature and time, added copper content and prior heat-treatment on the processing window of 3.6wt%C-2.5wt%Si ductile cast iron during austempering. The maximum processing window was obtained at 350℃ of austempering temperature. The processing window was increased with increased austenitizing temperature from 850 to 900℃; however, it decreased at 950℃. The processing window was increased with increased austenitizing time from 0.5 to 2 hours and rather decreased for 4 hours. The optimum condition of austenitizing was obained at 900℃ for 2 hours. The processing window was increased with copper content added in the range of 0.0~0.8wt%. The processing window was increased by prior normalizing heat-treatment and decreased by prior annealing in comparison with that for the as-cast state,
A feasibility test was carried out for upcycling of waste jelly-filled communication cables together with the development of environmentally friendly processes and equipments. High pressure water injection is proved to be an exceptionally environmentally friendly and highly efficient mechanical process. A batch-type cable barking equipment is designed and built on the basis of computational fluid dynamics modelling. It is optimized in terms of energy consumption and productivity with very high copper recovery of 99.5%. Copper nano-powder is prepared by an electrical wire explosion in ethanol media in order to improve the value of final products, and the preliminary economical assessment is also conducted.
가속기의 저장링 및 빔라인에는 방사광을 차단 혹은 일부 통과 둥의 목적으로 Photon Absorber와 같은 진공 부품이 사용되고 있으며, 이는 일반적으로 구리와 스테인리스 스틸 등의 이종재료를 브레이징 공정을 이용하여 제작함으로써 부품이 구조적 건성의 확보와 더불어 진공환경 및 수밀을 유지하고 있다. 그러나, Photon Absorber는 사용 용도에 따라 구조적 형상이 서로 다르기 때문에 브레이징 공정을 적용하는 경우, 상대적으로 제품 생산가격의 상승, 유지보수 및 제작불량에 따른 공정 제어의 어려움이 나타나고 있다. 본 연구에서는 스테인리스 스틸 (STS 304)과 구리(OFHC Copper)의 이종금속에 접합에 GTAW 용접 공정 기술을 적용하여 제반 용접공정에 따른 용접부 성능 및 진공 특성 등을 검토하였다. 용접봉 (ER CuSi-A)을 직접 사용하여 이종 재료의 시험편에 GTAW 용접을 적용한 결과, 진공 누설율은 $1{\times}10^{-10}\;Torr{\cdot}l/s$ 이하를 얻을 수 있었으며, 용접 접합부의 인장강도 210 MPa로써 구리 모재와 유사한 기계적 특성을 나타내었다.
The microstructure of Cu thin films in various deposition conditions was characterized. Cr films (50 nm thick) and Cu films (500 or 1000 nm thick) were deposited on polyimide films by DC magnetron sputtering. The Ar pressure during Cu deposition was controlled to 5, 50 and 100 mtorr. The microstructure was characterized using conventional and high resolution SEM and TEM. As sputtering pressure increases, open boundaries are observed more frequently. The Cu film deposited at 5 mtorr has a dense and uniform structure, while low-density regions or open boundaries between columns exist in the film deposited at higher pressure. As the film grows thicker, open boundaries are wider and the density of open boundaries are higher. The comparison between SEM and TEM show that the small features shown in high resolution SEM are grains. High resolution SEM is very effective to characterize the microstructure of the thin films. One column in the films deposited at 50 and 100 mtorr consists of several grains, which are smaller than those deposited at 5 mtorr.
Electrokinetics technology is proposed for improving the recovery metals ion and oil from clay-sandy soil. In order to restore or extract them from clay-sandy soil, the gas produced by anode chamber is re-injected to the clay-sandy soil(sample). Samples produced in this study were completed to verify the proposed performance for 7 days by gradually increasing the pressure to the final pressure of 30psi($2.11kgf/cm^2$) through the compression process. Before compression, the copper rings were inserted into the sample, allowing us to observe the changes in appearance of copper ring after the end of the experiment. In this study, pressurized module and non-pressurized module were tested, respectively. The condition of test is a continuous process and the voltage gradient is 2V/cm during 24 hours. As a result, the efficiency of pressurized module is better than non-pressurized module.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.