• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.5
• /
• pp.869-875
• /
• 2017

Using TCAD simulation, performances of tunnel field-effect transistors (TFETs) was investigated. Drain current-gate voltage types of TFET structure such as single-gate TFET (SG-TFET), double-gate TFET (DG-TFET), L-shaped TFET (L-TFET), and Pocket-TFET (P-TFET) are simulated, and then as dielectric constant of gate oxide and channel length are varied their subthreshold swing (SS) and on-current ($I_{on}$) are compared. On-currents and subthreshold swings of the L-TFET and P-TFET structures with high electric constant and line tunneling were 10 times and 20 mV/dec more than those of the SG-TFET and DG-TFET using point tunneling, respectively. Especially, it is shown that hump effect which dominant current element changes from point tunneling to line tunneling, is disappeared in P-TFET with high-k gate oxide such as $HfO_2$. The analysis of 4 types of TFET structure provides guidelines for the design of new types of TFET structure which concentrate on line tunneling by minimizing point tunneling.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.6
• /
• pp.504-513
• /
• 2009

This paper proposes the new type LED driver modularization for illumination LED driver. The proposed LED driver circuit insulates a hot GND of AC input power and a cold GND of LED driver part by using a fly-back converter. In order to control easily the current of the LED, the fly-back converter is operated in the discontinuous mode with excellent dynamic characteristics, and the characteristics of the LED are verified after the closed loop control is performed using a KIA2431. The LED driver module allows the wide AC power input ranges and realizes the burst dimming function which directly regulates a PWM control IC. This paper describes the operation principle of the LED driver module and it is proved the usefulness through the real model with experimentation. Besides, this paper proposes the multi-channel LED driver which the miniaturized and modularized LED driver module are connected by parallel, and verified its propriety by experiments.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.2
• /
• pp.81-85
• /
• 2017

Fiber-reinforced polymer composites, which are made by combining a continuous fiber that acts as reinforcement and a homogeneous polymeric material that acts as a host, are engineering materials with high strength and stiffness and a lightweight structure. In this study, a shape memory alloy(SMA) reinforced composite actuator is presented. This actuator is used to generate large deformations in single lightweight structures and can be used in applications requiring a high degree of adaptability to various external conditions. The proposed actuator consists of numerous individual laminas of the glass-fiber fabric that are embedded in a polymeric matrix. To characterize its deformation behavior, the composition of the actuator was changed by changing the matrix material and the number of the glass-fiber fabric layers. In addition, current of various magnitudes were applied to each actuator to study the effect of the heating of SMA wires on applying current.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.5
• /
• pp.481-486
• /
• 2012

We discuss the design, fabrication, and testing of a large-displacement electromagnetic actuator with the meander springs partially exposed to a magnetic field. We compared two prototypes: a prototype (F) of the conventional actuator with the meander springs fully exposed to a magnetic field and a prototype (P) of the proposed actuator with the meander springs partially exposed to a magnetic field. For a 5 Hz square input current varying from 10.40 mA, P showed an increase of $16.9{\pm}1.2%$ in the amplitude, which was greater than the increase in the case of F. Thus, we experimentally demonstrated the large-displacement actuation performance of the proposed actuator in a small volume and at low currents (below 40 mA). The proposed electromagnetic actuator can be used for low-power and large-displacement manipulation of optical switches and optical choppers.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.285-291
• /
• 2013

In this paper, MOS-Capacitor and MOSFET devices with a Low Level Leakage Current of oxide thickness, channel width and length respectively were to investigate the reliability characterizations mechanism of ultra thin gate oxide films. These stress induced leakage current means leakage current caused by stress voltage. The low level leakage current in stress and transient current of thin silicon oxide films during and after low voltage has been studied from strss bias condition respectively. The stress channel currents through an oxide measured during application of constant gate voltage and the transient channel currents through the oxide measured after application of constant gate voltage. The study have been the determination of the physical processes taking place in the oxides during the low level leakage current in stress and transient current by stress bias and the use of the knowledge of the physical processes for driving operation reliability.

• JOURNAL OF ELECTRICAL WORLD
• /
• s.323
• /
• pp.69-75
• /
• 2003

불투명한 경제정세의 와중에서도 전기에너지를 지탱하는 근간이 되는 파워 일렉트로닉스 분야는 확실히 그 기술개발을 향상시켜 오고 있다. 특히 파워디바이스는, 지구환경과 생활환경을 보다 쾌적하게 하기 위하여 인버터 장치 등의 각종 전력절약기기와 풍력$\cdot$태양광$\cdot$연료전지 등 클린에너지의 전력제어장치에 없어서는 안되는 반도체디바이스로 성장했다. 파워디바이스 중에서도 IGBT(Insulated Gate Bipolar Transistor)의 기술혁신은 요 20년 사이에 비약적인 성과를 거두었다. 1980년대에 제품화된 IGBT는, 반도체메모리의 초미세가공기술을 도입하면서 $5{\mu}m$에서 서브미크론의 디자인툴로 발전하여, 2000년대에 들어 칩의 전류밀도는 약 2배, 포화전압은 약 $65\%$까지 개량되었다. 이와 같은 IGBT의 변천은, 전력손실을 대폭적으로 저감시켜 에너지절약기기의 전력변환효율 향상에 공헌하고 있다. 파워디바이스의 기술진보에서 또 한 가지 잊지 말아야 할 것은 주변회로의 집적화(集積化)에 의한 고성능$\cdot$고기능화이다. 최근의 인버터용 파워디바이스로 가장 많이 사용되고 있는 파워모듈은, IGBT등의 파워칩과 그 주변회로와의 컬래버레이션에 의한 제품이다. 다시 말하면 구동회로, 전류$\cdot$전압$\cdot$온도센서 및 그것들의 보호회로가 IC(집적회로)에 편입되어 고기능$\cdot$소형화를 촉진시키고 있다. 구동회로는 LVIC (저전압집적회로)에서 HVIC(고전압집적회로)로 발전하여 전류$\cdot$온도 등의 각종 센서도 동일 칩에 설계할 수 있게 되었다. 또 센싱이나 보호기능뿐만이 아니라 출력전류의 제어를 위한 연산기능과 di/dt의 제어기능이 내장되도록 되어 있어 보다. 고성능의 인텔리전트 파워모듈(IPM)이라고 불리우는 새로운 개념의 파워디바이스가 실현되었다. 또한 패키지 기술도 내부배선 인덕턴스의 저감과 트랜스퍼 몰드패키지의 개발로, 소형화뿐만이 아니라 파워칩의 성능$\cdot$기능을 충분히 발휘할 수 있도록 개발이 적극적으로 추진되고 있다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.123-123
• /
• 2003

탄소나노튜브는 지금까지의 많은 연구를 통해 다양한 분야에 대한 응용 가능성이 확인되었으며, 그 중에서도 특히 탄소나노튜브를 이용한 전계방출표시소자(carbon nanotube field emission display, CNT-FED)는 상용화를 눈앞에 두고 있는 상황이다. 본 연구에서는 탄소나 노튜브를 합성할 수 있는 여러 가지 방법 중에서 열화학기상증착법(thermal chemical vapor deposition, thermal CVD)을 이용하여 유리기판 위에 탄소나노튜브를 합성하였다. Electron beam evaporation으로 유리기판 위에 전극층으로 Cr을 150nm를 증착하고 연속하여 촉매층인 Invar(Fe-53%Ni-6%Co 합금)를 10nm의 두께로 형성하였다. 사진식각으로 Cr층을 line 패턴한 후 Cr line 내의 Invar층을 line 및 dot 패턴하였다. 나노튜브 합성을 위해 480-58$0^{\circ}C$까지 진공분위기 또는 질소 분위기에서 20분간 승온한 후 CO(150sccm)와 H$_2$(1200sccm)를 주입하여 20분간 성장시키고 질소 분위기에서 냉각시켰다. 성장된 탄소나노튜브는 SEM, TEM, Raman spectroscopy 등을 통하여 구조 및 형상분석을 하였다. 진공승온의 경우 탄소불순물인 a-C이 많은 양 증착 되었으며 탄소나노튜브는 온도에 따라 1-5$\mu\textrm{m}$의 두께로 성장하였으나, 질소분위기 승온의 경우는 a-C이 거의 증착되지 않았으며 나노튜브의 두께가 10-20$\mu\textrm{m}$였다. 본 연구에서는 diode구조를 갖는 탄소나노튜브 에미터의 수명예측을 위해 여러 가지 가속측정조건에서 전계방출 특성을 연구하였다. Anode와 cathode 간의 간격을 400$\mu\textrm{m}$로 유지한 diode 구조에 대해 $10^{-6}$ torr 이하의 진공에서 전계방출을 측정하였다. 100 line의 에미터를 60Hz의 주파수에서 1/100 duty로 구동하였으며, duty비 증가에 따라 pulse의 on-time을 고정하고 frequency를 변화시켰다. dc까지 duty비가 증가됨에 따라 방출전류의 양이 선형적으로 증가하였다. 전압을 일정하게 고정시키고 각 duty비에서 시간에 따라 방출전류를 측정한 결과 duty비가 높을수록 방출전류가 시간에 따라 급격히 감소하였다. 각 duty비에서 방출전류의 양이 1/2로 감소하는 시점을 에미터의 수명으로 볼 때 duty비 대 에미터 수명관계를 구해 높은 duty비에서 전계방출을 시킴으로써 실제의 구동조건인 낮은 duty비에서의 수명을 단시간에 예측할 수 있었다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.1
• /
• pp.13-18
• /
• 1999

This paper proposes a new overmodulation stategy to give a better voltage by the full utilization of the hexagon voltage range in the space vector PWM(SVPWM) inverter. This overmodulation strategy can apply to the vector control, leading to better output torque capability in the ac motor drive system. This strategy is that in the overmodulation range, the d-axis output current is given a priority to regulate the flux well, instead the q-axis output curent is sacrificed. Therefore, the vector control even in the overmodulation PWM operation can be achieved well. For this purpose, the d-axis output voltage of a current controller to control the flux is conserved. the q-axis output voltage to control the torque is controlled to place the reference voltage vector on the hexagon boundary in case of the overmodulation. The validity of the proposed overall scheme is confirmed by simulation and experiments for a 22[kW] induction motor drive system

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.6
• /
• pp.496-503
• /
• 2009

In this paper, a new three-phase interleaved isolated high efficiency boost dc-dc converter with active clamp is proposed. The converter is capable of increased power transfer due to its three-phase power configuration, and it reduces the rms current per phase, thus reducing conduction losses. Further, interleaved operation of three-phase boost converter reduces overall ripple current, which is imposed into fuel cells and realizes smaller sized filter components, increasing effective operating frequency and leading to higher power density. Each output current of three-phase boost converter is combined by the three-phase transformer and flows in the continuous conduction mode by the proposed three-phase PWM strategy. An efficiency of above 96% is mainly achieved by reducing conduction losses and switching losses are reduced by the action of active clamp branches, as well. The proposed converter and three-phase PWM strategy are analyzed, simulated and implemented in hardware. Experimental results are obtained on a 500 W prototype unit, with all of the design verified and analyzed.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.2
• /
• pp.140-148
• /
• 2000

A robust current control technique with a simple time delayed estimator for a permanent magnet synchronous m motor (PMSM) drive is presented. Among the various CWTent control schemes for a voltage source inverter-fed P PMSM drive, the predictive control is known to give a superior performance. This control technique, however, r requires the full knowledge of machine parameters and operating conditions, and gives an unsatisfactory r response under the parameter mismatch between the motor and controller. To overcome such a limitation, the d disturbances caused by the parameter valiations will be estimated by using a" time delay contTol approach and u used for the computation of the reference voltages by a simple feedforwal"d control. The proposed control $ scheme is implemented on a PMSM using the software of DSP TlVIS:32OC:30 and the effectiveness is verified d through the comparative simulations and experiments.periments.