• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04a
• /
• pp.157-159
• /
• 2004

본 논문에서는 분산 일시간 객체 엔진을 내장하는 TMO-LINUX/ARM 커널 상에서, 각종 센서 및 모터 제어로 구성되는 로봇 제어 시스템을 동적 분산 실시간 객체인 TMO로 모델링하고 구현하였다. TMO(Time-triggered Message-triggered Object)는 시간적 조건에 의해 구동되는 객체 내의 실시간 스레드와 메시지에 의해 구동되어 주어진 데드라인 안에 작업을 수행하는 메시지 구동 실시간 스레드들의 동적 멤버들로 구성되는 실시간 객체로, 외부의 입출력에 반응하며 내부 장치에 대한 실시간 작업을 병행해야 하는 로봇 제어 시스템에 대해 매우 적합한 모델이다. 본 논문에서는 이러한 로봇 제어 시스템 설계에의 TMO의 적용이 잘 정의되고 규격적인 설계 모델을 제공함을 보인다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.1
• /
• pp.82-90
• /
• 2013

In this paper, conducted emission from the MDS(Motor Drive System) of a HEV/EV was analyzed using high- frequency circuit modeling in system-level approach. The conducted emission by PWM process can cause RFI(radio- frequency interference) problems in the AM/FM frequency range. In order to mitigate this conducted emission, a high-frequency equivalent circuit model is proposed by analyzing the fundamental circuits, parasitic components in their parts and connections and non-linear characteristics of IGBTs, high-power capacitors, inverters, motors, high-power cables, and bus bars which are composed of the MDS. It is confirmed that the simulated result by the proposed model is well agreed with measured results in spite of a large-scaled analysis in system level. We are looking forward that this approach can be effectively used in the EMC design of HEV/EV.

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.527-529
• /
• 1999

본 논문에서는 압전 구동기의 모델링과 진상-지상 보상기를 이용한 정밀 위치 제어 시스템을 제안한다. 최근 압전 구동기는 고속, 고정밀도가 요구되는 분야에 널리 응용되고 있으나 압전 소자의 히스테리시스 현상으로 인하여 폐루프 제어가 어렵다. 압전 구동기는 개루프 제어 특성이 우수하지만 최근의 X-Y 스테이지나 반도체 공정과 같은 높은 정밀도가 요구되는 작업에서 필요한 성능을 얻기 위해서는 폐루프 제어가 수행되어져야 한다. 따라서 위치 피드백을 이용한 폐루프 제어를 위해 선형 압전 이론으로부터 압전 구동기의 모델링을 정립하고 이 모델로부터 진상-지상 보상기를 설계하며 제어기의 성능을 검토하기 위하여 모의 실험 결과를 보인다.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.9
• /
• pp.1-8
• /
• 2023

This paper presents the control strategy of Auto-leveling equipment (ALE) of Multi-function radar (MFR) for vehicle using Embedded System. MFR implements surveillance patrol missions such as surface-to-air missiles and fighters with constant rotation. ALE consists of 4 Auto-leveling modules (ALM) and retains the stability with maintaining level. The gradient of vehicle can be measured and controlled by embedded systems. This paper contributes for improvement the system design with the ALM 1 set modeling. The validity of the modeling is verified using MATLAB/Simulink.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.2
• /
• pp.17-28
• /
• 2015

In this paper, it is accomplished to design a control method for such an actuation system of simplified ON/OFF mechanism with actuation command limit. First of all, based on experimental data, the modeling works for nonlinear/linear actuation dynamics are performed, which are govern by PWM command as a control input. Using the linearized model, a classical PI control method is designed to satisfy the aimed control performance requirements, and a control algorithm is proposed to realize the required control performance in the effective control region through resolving the issue for the PWM command limit which reduces the control performance. Finally, through control simulations, the design method is verified and the corresponding control performance improvement is evaluated.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.7
• /
• pp.937-943
• /
• 2013

An independently driven electric corner module cannot be applied to an actual vehicle without some difficulty, because of vehicle safety problems in the case of malfunctions and degraded ride and handling performance owing to the increase in the unsprung mass. In this study, a simulator is developed to evaluate the vehicle driving performance in order to solve ride and handling problems. Component modeling of a small-sized electric vehicle with an independently driven electric corner module is performed using MATLAB/Simulink. The vehicle is modeled by using CarSim, which can be used to analyze the vehicle maneuvers with 27 DOFs. The control algorithm for the improvement of vehicle driving safety and ride and handling performance is validated by using the developed simulator.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.5
• /
• pp.436-443
• /
• 2013

This paper presents design methods of a fuzzy controller and an operator model for a wire-driven heavy material lifting system helping human workers. The wire-driven heavy material lifting system is a kind of human-assistive systems in which a human is involved in the control loop. Thus, human's control characteristics and requirement of reducing worker's force to lift a heavy material are considered in the design process of the proposed fuzzy controller. An automatic weight measurement algorithm during the early stage of lifting is also introduced. Finally, the effectiveness and performance of the proposed system are proved by experiments.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.267-268
• /
• 2014

본 논문에서는 LCI (Load Commuted Inverter) 시스템의 구동원리와 제어방식에 대해서 서술하였으며, 알고리즘 검증을 위한 모델링을 매트랩/시뮬링크를 사용하여 진행하였으며, 5kW급 프로토타입을 통해 제어 알고리즘의 성능을 확인하였다. 시스템 속도에 따라 달리하는 구동방식인 강제전류 모드와 자연전류 모드는 동기발전기의 정격속도 10%인 180rpm에서 모드 전환이 이루어지며, 과도상태 및 정격속도까지 안정적인 동작을 확인하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.411-411
• /
• 2000

본 논문에서는 새로운 형태의 정밀위치제어용 3자유도 매니플레이터를 제안하고, 기구학 해석을 수행하며, FEM과 수치해석적인 방법을 비교하여 메카니즘에 대한 모델링 방법이 크게 틀리지 않음을 확인 하고자 한다. 회전관절과 구형관절은 비구동관절로써 미소움직임이 가능하도록 하나의 모듈로 이루어진 flexure hinge들로 만들어진다. 따라서, 비구동관절에 대한 강성해석을 수행하며 구동관절의 토오크 벡터를 비구동관절의 강성과 변위로 표현하여 액추에이터의 구동용량을 결정한다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.3
• /
• pp.15-21
• /
• 2000

This paper presents the modeling method of $3\Phi$ phase-controlled rectifier for the DC motor drive in MATLAB/SIMULINK environment. This method has no need to extend the system mathematically and thus it's easy to integrate the various systems. The whole model consists of $3\Phi$ phase-controlled rectifier block, DC motor block and speed/current controller block. The simulation results show that the model outputs are almost similar to those of the real system and therefore that the presented method is suitable for the research of the closed-loop controlled power electronic systems.