• KSBB Journal
• /
• v.22 no.5
• /
• pp.288-296
• /
• 2007

Monascus pilosus (KCCM 60160) in submerged culture was optimized based on culture medium and fermentation conditions. Monacolin-K (Iovastatin), one of the cholesterol lowing-agent which was produced by Monascus pilosus may maintain a healthy lipid level by inhibiting the biosynthesis of cholesterol. Plackett-Burman design and response surface method were employed to study the culture medium for the desirable monacolin-K production. As a result of experimental designs, optimized production medium components and concentrations (g/L) were determined on soluble starch 96, malt extract 44.5, beef extract 30.23, yeast extract 15, $(NH_4)_2SO_4$ 4.03, $Na_2HPO_4{\cdot}12H_2O$ 0.5, L-Histidine 3.0, $KHSO_4$ 1.0, respectively. Monacolin-K production was improved about 3 times in comparison with shake flask fermentation of the basic production medium. The effect of agitation speed (300, 350, 400 and 450 rpm) on the monacolin-K production were also observed in a batch fermenter. Maximum monacolin-K production with the basic production medium was 68 mg/L when agitation speed was 500 rpm. And it was found that all spherical pellets (average diameter of $1.0{\sim}1.5mm$) were dominant during fermentation. Based on the results, the maximum production of 185 mg/L of monacolin-K with the optimized production medium was obtained at pH (controlled) 6.5, agitation rate 400 rpm, aeration rate 1 vvm, and inoculum size 3%.

• Journal of Sericultural and Entomological Science
• /
• v.15 no.1
• /
• pp.9-14
• /
• 1973

This study has been carried out to investigate proteinase activity of digestive juice and sucrase activity of midgust tissue in the 5th day of the 5th instar influenced by the dietary composition (quantitative ratio between carbohydrate and protein) and tile rearing temperature during the 4th moulting period. The larvae grew on three kinds of semi-synthetic diet. The A-diet has more carbohydrate than the others, the B-diet has carbohydrate in 1 : 2 with protein, and the C-diet has more protein than the others. All the diets were kept at 16$^{\circ}C$, 25$^{\circ}C$ and 33$^{\circ}C$ during the 4th moulting period. Proteinase activity of digestive juice at the 5th day of the 5th instar was analyzed by Anson's hemoglobin method. Sucrase activity of midgut tissue at the 5th day of 5th instar was analyzed by Somogyi-Nelson's method. The results were as follows. 1. The dietary composition influencing contents of blood sugar was not related to the rearing temperature during the 4th moulting period. The contents of blood sugar appeared to increase in A-diet, B-diet and C-diet order, while proteinase and sucrase activity were stronger in C-diet, B-diet and A-diet order. 2. All kinds of diets showed almost the same fact that proteinase activity at 16$^{\circ}C$ was stronger than that at 32$^{\circ}C$. 3. It was found that sucrase activity became gradualy stronger at 32$^{\circ}C$, 25$^{\circ}C$ and 16$^{\circ}C$ in order in all kinds of diets. 4. There was an interaction in proteinase activity between the dietary composition and the rearing temperature in male larval digestive juice during the 4th mouiting period. On the other hand, there was an inter-acion in sucrase activity between the dietary composition and the rearing temperature in both female and male larval midgut tissue during the 4th moulting period.

• Korean Journal of Environmental Agriculture
• /
• v.35 no.1
• /
• pp.79-86
• /
• 2016

BACKGROUND: This study was initiated to quantitatively evaluate the effects of five heavy metals on the growth and P removal efficiencies of Alcaligenes sp., known as the Phosphorus Accumulating Organisms (PAOs). It was cultivated in the batch system with five heavy metals, such as Cd, Cu, Zn, Pb and Ni, added in single and binary mixtures, respectively.METHODS AND RESULTS: IC₅₀ (half of inhibition concentration of bacterial growth) and EC₅₀ (half of effective concentration of phosphorus removal Efficiencies) were used to quantitatively evaluate the effects of heavy metals on the growth and phosphorus removal Efficiencies of Alcaligenes sp. In addition, Additive Index Value (A.I.V.) method was used to evaluate the interactive effects between Alcaligenes sp. and heavy metals. As a result, as the five heavy metals were singly added to Alcaligenes sp., the greatest inhibitory effects on the growth and P removal efficiencies of each bacteria was observed in the cadmium (Cd). In the binary mixture treatments of heavy metals, the treatments of lowest IC₅₀ and EC₅₀ were the Cd + Cu treatment. Based on the IC₅₀ and EC₅₀ of the binary mixtures of heavy metals treatments, most interactive effects between the heavy metals were found to be antagonistic.CONCLUSION: Based on the results obtained from this study, it appears that they could provide the basic information about the toxic effects of the respective treatments of single and binary mixtures of heavy metals on the growth and P removal efficiencies of Alcaligenes sp. through further study about the characterization of functional proteins involved in toxic effects of heavy metals.

• Horticultural Science & Technology
• /
• v.34 no.6
• /
• pp.818-829
• /
• 2016

This study evaluated the responses of 18 potato cultivars to three levels of salinity stress (electrical conductivity, EC: 1.0, 4.0, and $8.0dS{\cdot}m^{-1}$). Stem, leaf, root, chlorophyll, tuber yield, and proline content were investigated and statistically analyzed using analysis of variance (ANOVA) and correlations. Stem number and stem diameter were not affected by salinity, but stem length and aerial weight showed highly significant responses to salinity. Aerial weight decreased with increasing salinity levels in most cultivars, while it increased in some the cultivars 'Daejima', 'Goun', 'Haryeong', and 'LT-8'. Leaf number, leaf area index, and leaf weight were most significantly affected by salinity and the cultivar ${\times}$ salinity interaction. Root length, root weight, total chlorophyll and chlorophyll a were affected by salinity, but not by the cultivar ${\times}$ salinity interaction. The opposite trend was shown in chlorophyll b. Although there was great variability among cultivars, tuber yield decreased in all cultivars, and was most significantly influenced by salinity and the cultivar ${\times}$ salinity interaction. 'Superior', 'Kroda', 'Romana', and 'Duback' gave better tuber yields under salinity at EC 4.0 and $8.0dS{\cdot}m^{-1}$ than the cultivars with better aerial weights. Proline content was increased by salinity in all cultivars, and was more remarkable in the cultivars with better aerial weights than in cultivars such as 'Superior' and 'Kroda' with better tuber yields. Leaf number, leaf area index, leaf weight, and root length parameters were considered to be useful criteria in the evaluation of salt tolerance because of their high positive correlation with tuber yield; however, given its negative correlation with tuber yield under high salinity, proline content was not. Salinity tolerances varied greatly among potato cultivars. The low correlation between growth and yields of aerial parts under high salinity suggests that, in commercial agriculture, it might be more practical to compare relative yields to controls. Additionally, 'Superior', 'Kroda', 'Romana', and 'Duback' might be very useful cultivars to use in breeding programs to develop salinity-tolerant potatoes, as well as for sustainable potato production in saline areas.

• Journal of Hospice and Palliative Care
• /
• v.15 no.2
• /
• pp.68-76
• /
• 2012

Purpose: The study was designed to verify effects of aromatherapy on depression, anxiety and the autonomic nervous system in breast cancer patients who are undergoing adjuvant radiotherapy. Methods: Data were collected from November 2006 through March 2007 at the C university hospital in Seoul. The study included 33 patients and they were assigned to three groups. Group I had aroma oil inhalation for 2 minutes per time, three times a day for six weeks whereas Group II and a control group inhaled aroma oil for 2 minutes per time, once a day for six weeks. For Groups I and II, a mixture of lemon, lavender, rosewood and rose essential oils were used while control group inhaled tea tree oil. Results: Depression was significantly decreased in patients in the experimental groups only. In Groups I and II patients, anxiety level was lower than that in control patients. Patients in Groups I and II also showed stronger physical resistance to stress than control group patients. Conclusion: Aromatherapy should be considered as a method that can significantly decrease depression in breast cancer patients who are undergoing adjuvant radiotherapy.

• Asian Journal of Turfgrass Science
• /
• v.22 no.2
• /
• pp.197-216
• /
• 2008

Managing a mixture of zoysiagrass with tall fescue has been proposed in transitional zone as a practical practice to combine the advantages of the two species and compensate the limitations. To manage the mixture is a challenge because two species are involved. The objective of this study was to determine if zoysiagrass/tall fescue mixture can be maintained with proper mowing and fertilization under simulated sport traffic at an acceptable quality level. Zoysiagrass was seeded in June and tall fescue was overseeded in August 1996. In November 1996, zoysiagrass coverage was 62.36, 29.88, and 30.02% for 0, 50, and $100\;Kg\;ha^{-l}\;N$ rates, respectively. At the same time, zoysiagrass coverage was 23.53, 41.95, and 57.40% for the mowing heights of 6.5, 5.0, and 3.5 cm, respectively. Zoysiagrass and tall fescue coverage in July 1997 was showing the same trend as in the late season of 1996 although the differences were not as big. There were significant interactions between N fertilization rates and mowing heights. In November 1998, the zoysiagrass coverage was different among the two tall fescue variety mixtures, 21.68, and 32.25% in 'Arid' and 'Grasslands Garland', respectively. Zoysiagrass coverage was favored in lower mowing height, lower N rates, and lower traffic. Interaction effects on zoysiagrass were found between tall fescue variety and nitrogen rate, tall fescue variety and mowing height, and traffic and nitrogen rate. Zoysiagrass shoot density was 7.42, 25.47, and 58.95% for mowing heights of 6.5, 5, and 3.5 cm, respectively; and it was 47.27, 20.27, and 26.26% for N rates of 0, 50, and $100\;Kg\;ha^{-l}\;$, respectively in 1998. The effects on zoysiagrass shoot density from the interaction of N rate and tall fescue variety was significant in 1998. Shoot density responded to the N rate, mowing height, and traffic differently from the ground coverage, indicating that shoot and leaf growth have different adaptation strategies.

• Korean Chemical Engineering Research
• /
• v.44 no.6
• /
• pp.650-658
• /
• 2006

The recycling of TDA from solid waste of TDI plant(TDI-R) by near-critical hydrolysis reaction had been studied by means of a statistical design of experiment. The main and interaction effects of process variables had been defined from the experiments in a batch reactor and the correlation equation with process variables for TDA yield had been obtained from the experiments in a continuous pilot plant. It was confirmed that the effects of reaction temperature, catalyst type and concentration, and the weight ratio of water to TDI-R(WR) on TDA yield were significant. TDA yield decreased with increases in reaction temperature and catalyst concentration, and increased with an increase in WR. As a catalyst, NaOH was more effective than $Na_2CO_3$ for TDA yield. The interaction effects between catalyst concentration and temperature, WR and temperature, catalyst type and reaction time on TDA yield had been defined as significant. Although the effect of catalyst concentration on TDA yield at $300^{\circ}C$ as subcritical water was insignificant, the TDA yield decreased with increasing catalyst concentration at $400^{\circ}C$ as supercritical water. On the other hand, the yield increased with an increase in WR at $300^{\circ}C$ but showed negligible effect with WR at $400^{\circ}C$. The optimization of process variables for TDA yield has been explored with a pilot plant for scale-up. The catalyst concentration and WR were selected as process variables with respect to economic feasibility and efficiency. The effects of process variables on TDA yield had been explored by means of central composite design. The TDA yield increased with an increase in catalyst concentration. It showed maximum value at below 2.5 of WR and then decreased with an increase in WR. However, the ratio at which the TDA yield showed a maximum value increased with increasing catalyst concentration. The correlation equation of a quadratic model with catalyst concentration and WR had been obtained by the regression analysis of experimental results in a pilot plant.

• Restorative Dentistry and Endodontics
• /
• v.34 no.5
• /
• pp.406-414
• /
• 2009

The purpose of this study was to examine the effect of hydrogen peroxide at different application time and concentrations on the microtensile bond strength of resin restorations to the deep and the pulp chamber dentin. A conventional endodontic access cavity was prepared in each tooth, and then the teeth were randomly divided into 1 control group and 4 experimental groups as follows: Group 1, non treated; Group 2, with 20% Hydrogen peroxide ($H_2O_2$); Group 3, with 10% $H_2O_2$; Group 4, with 5% $H_2O_2$; Group 5, with 2.5% $H_2O_2$; the teeth of all groups except group 1 were treated for 20, 10, and 5min. The treated teeth were filled using a Superbond C&B (Sun medical Co., Shiga, Japan). Thereafter, the specimens were stored in distilled water at $37^{\circ}C$ for 24-hours and then sectioned into the deep and the chamber dentin. The microtensile bond strength values of each group were analyzed by 3-way ANOVA and Tukey post hoc test(p < 0.05). In this study, the microtensile bond strength of the deep dentin (D1) was significantly greater than that of the pulp chamber dentin (D2) in the all groups tested. The average of microtensile bond strength was decreased as the concentration and the application time of $H_2O_2$ were increased. Analysis showed significant correlation effect not only between the depth of the dentin and the concentration of $H_2O_2$ but also between the concentration of H202 and the application time(p < 0.05), while no significant difference existed among these three variables(p > 0.05). The higher $H_2O_2$ concentration, the more opened dentinal tubules under a scanning electron microscope(SEM) examination.

• Korean Journal of Soil Science and Fertilizer
• /
• v.20 no.3
• /
• pp.269-274
• /
• 1987

A laboratory experiment was conducted to find out the effect of inoculation with plant growth of associative $N_2$-fixing bacteria on the combination of eight different rice seedling with seven different associative $N_2$-fixing bacteria in which were isolated and identified from grasses and rice in saline and reclaimed saline paddy soil. Those were examined in N-free axenic culture medium. The result of this experiment exemplified the contribution of associative $N_2$-fixing bacteria to their host plant were varied much by the combination of rice cultivars and bacterial strains. Acetylene reduction ($N_2$-fixation) activity seems to be more variable with respect to the combination of rice cultivars and bacterial strains. The relationship between acetylene reduction activity and rice performance such as dry matter weight, plant height, root length, and number of root were statistically insignificant. However, in comparision with the control, the dry matter yield of Annapuruna was increased by inoculation of all the seven bacteria strains. Among the seven rice cultivars, the average acetylene reducing activity was the highest in Annapuruna, and Shingwang, and the lowest in IR-8 inoculated with Pseudomonas sp H8. Among the seven bacterial strains the highest acetylene reducing activity was obtained by the combination of Shingwang with Pseudomonas sp H8.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.04a
• /
• pp.219-226
• /
• 2003

보 유사법을 이용하여 연속 압축재의 유효길이 계수를 각 경간별로 결정하는 방법을 제안한다. 제안하는 보 유사법은 4가지 단계로 요약할수 있는데 그 첫 단계는 주어진 압축재를 이것과 동일한 단면성능 및 경간을 갖는 연속보로 치환하는 것이다. 제 2단계에서는 연속보 각 경간의 중앙에 가상 집중 횡하중을 작용시킨 후 이로 인한 지점들에서의 재단 moment를 계산한다. 이때 각 경간중앙의 가상 집중 횡하중 방향은 좌굴 mode를 고려하여 교호로 바뀌도록 한다. 제 3단계에서는 또 하나의 제안식과 재단 모멘트를 이용하여 Kinney의 부분 고정도를 결정한다. 최종단계에서는 부분 고정도를 이용하여 유효길이를 각 경간별로 산정 한다. 제안한 방법은 다 경간 압축재에서 어느 경간이 맨 먼저 좌굴을 일으키는지 또한 이때의 임계하중은 어떤 값을 갖는지를 예측하게 한다.