• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.4
• /
• pp.665-670
• /
• 2004

The mandibular buccal frenum becomes a problem when its attachment is too close to the marginal gingival. Heavy buccal frenum mucogingivally results in insufficient attached gingiva, inadequate vestibular depth and also difficulty in eruption of mandibular premolar. The aim of this study is to demonstrate the effectiveness of apically positioned partial-thickness flap as adequate method in order to remove heavy buccal frenum and expose impacted teeth. The author presents the case of a 12-year-old boy. He had problems that was prolonged eruption of #34, #35 due to high pull buccal frenum. After space regaining for normal eruption of #34, #35, we performed apically positioned partial-thickness flap on #34, 35 area. As a results, we confirmed that eruption of #34, #35 has been processed normally And vestibular depth, position of buccal frenum and width of attached gingival was within a normal range. Decrease in muscle pull, adequate width of attached gingiva and increased vestibular depth can be expected from this treatment.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.4
• /
• pp.343-352
• /
• 2019

Abnormal orofacial functions such as lip incompetency in the period of growth and development can cause morphological anomalies of the craniofacial complex. Therefore, it is crucial to make an early diagnosis based on the evaluation of the myofunctional conditions, and to make appropriate treatment plans. The objectives of this study were to quantitatively evaluate the standard lip closing force (LCF) of each age in the elementary school children, and to evaluate the relationships between LCF and affecting factors. The sample consisted of 765 children who were 7 - 12 years old in Jeonju city. Clinical examination about occlusal conditions and lip competency, and LCF measurement were performed by a single examiner. LCF was measured three times for each children with the LCF measuring device. The LCF was correlated positively with age in both sexes. The distribution of LCF groups was correlated significantly with Angle's classes and lip competency (p = 0.016, 0.004). The proportion of children with high LCFs was greater in the "competent lip" group, whereas the proportion of those with low LCFs was greater in the "incompetent lip" group.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.4
• /
• pp.361-369
• /
• 2008

The purpose of this study is to make porous oxide film on the surfaces of pure Ti through anodic spark discharge in electrolytic solution containing calcium and phosphate ions, to improve osseointergration by treating fluoride agent. In addition, it is to evaluate the fluoride modified effect on the surface. Commercial pure Ti plate with $20{\times}10{\times}2mm$ and Ti wire with a diameter of 1.5mm and a total length of 15mm were used. After making titanium oxide films converted by anodic spark discharge, anodizing was performed. Fluoride was spreaded to titanium laboratory plate and maintained for 30 minutes after anodizing breakdown. Fluoride ion discharge amount was measured per 24 hours after dipping titanium plate into saline (10ml) and sustaining 90rpm in a pyrostat. Some plates and wires were dipped in Hanks solutions for a month to examine biocompatibility using SEM and XRD. $TiO_2$ film formed by anodic discharge technique showed great roughness and uniform pores which were $1{\sim}3{\mu}m$ in a diameter. Roughness of the films treated with anodic discharge after blasting were higher than the turned ones(P<0.05). Rapid surface activity was observed in the samples treated with $TiF_3$ agent, which immersed in Hanks solution for 30 days. Taking the results into consideration, the fluoride modified implant with anodic discharge demonstrates that it makes uniformly porous oxide film on the surface of implant and properly increase roughness for osseointegration. The implants will achieve greater bone integration after short healing time by improving surface activity.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.4
• /
• pp.263-273
• /
• 2016

In the implant prosthetic procedure, the soft tissue reaction was varied with the material and surface treatment of the abutment. It may be the cause of the peri-implantitis, and hence it can affect the long-term prognosis of the implant prosthesis. Titania and zirconia abutment presented superior biocompatibility and stable soft tissue reaction, while gold alloy abutment showed unfavorable reaction sometimes. A soft tissue reaction can be differed by the surface characteristics even in the same material type. Because rougher surface induces a bacterial attachment, the part contacting a soft tissue should have smooth surface. Additional surface treatment can enhance the cellular response without increasing bacterial attachment. Repeated removal and insertion of the abutment and the shape of the abutment may affect the soft tissue reaction, also. Ultrasonic cleaning and argon plasma cleaning are effective way to clean the retained micro-dust on the customized abutment.

• Restorative Dentistry and Endodontics
• /
• v.30 no.4
• /
• pp.312-318
• /
• 2005

This study compared the microtensile bond strength $({\mu}TBS)$ of three single step adhesives to dentin. Occlusal superficial dentin was exposed in fifteen human molars. They were assigned to three groups by used adhesives: Xeno group (Xeno III). Prompt group (Adper Prompt L-Pop). AQ group (AQ Bond). Each adhesive was applied to dentin surface. and composite of same manufacturer was constructed. The bonded specimens were sectioned into sticks with an interface area approximately $1mm^2$, and subjected to $\mu$ TBS testing with a crosshead speed of 1mm/minute. The results of this study were as follows; 1. The ${\mu}TBS$ to dentin was $48.78\pm9.83MPa$ for Xeno III. $30.22\pm4.52MPa$ for Adper Prompt L-Pop. and $26.31\pm7.07MPa$ for AQ Bond. 2. The mean ${\mu}TBS$ of Xeno group was significantly higher than that of Prompt group and AQ group (p<0.05). 3. There was no significant difference between the ${\mu}TBS$ of Prompt group and AQ group.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.6
• /
• pp.833-840
• /
• 1997

Differentiation and degeneration of spikelets in paddy rice has been studied in high yielding Indica$\times$Japonica hybrid cultivar, Milyang 23 and a Japonica type cultivar, Koshihikari. Germinated seeds planted in 5000$^{-1}$ a pots filled with submerged soil and cultured under natural conditions. The young panicles of main stem were continuously dissected and observered by Cryo-SEM from the panicle initiation stage, and investigated about formation position of the differentiation and degeneration spikelet within a panicle of 7 days after heading. The degeneration of spikelet appeared simultaneously throughout panicle just after closure of spikelet by the palea and lemma. Differentiated and degenerated spikelets per panicle were about 240, 80 for Milyang 23 and 87, 6 for Koshihikari, respectively. The spikelets degeneration in Milyang 23 was mainly on the secondary and tertiary branch which were developed from primary branch of middle-basal panicle node and hardly not the spikelets of primary branch, and degeneration rate of secondary and tertiary rachis branch and spikelets for Milyang 23 were 2.5 times greater than those of Koshihikari. The proper relation equation between total differentiation or normal spikelets number per panicle(Y) and each rachis branch number were different between cultivars, Le., Y=5.5X$_1$＋3.0X$_2$ for Koshihikari as previously proposed, but those of Milyang 23, Y=5.7X$_1$＋3.5X$_2$＋2.8X$_3$ for total differentiation spikelets and Y=5.6X$_1$＋3.2X$_2$＋2.4X$_3$ for normally developed spikelets, where X$_1$, X$_2$, X$_3$ are number of primary, secondary, tertiary rachis branch, respectively.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.37 no.3
• /
• pp.123-129
• /
• 2021

Purpose: The purpose of this study was to investigate antifungal activity of shiitake mushroom yeast and hyphal type of Candida albicans. Materials and Methods: The extract from shiitake mushroom was collected by drying the supernatant after soaking shiitake mushrooms in water or ethanol. The antifungal activity of the extracts against yeast type of C. albicans was investigated by the susceptibility assay using microplate. C. albicans biofilm was formed on 12-well plate using Ham's F-12 medium in CO₂ incubator and treated with the ethanol extract. Furthermore, C. albicans biofilm was formed on denture base resin disk and treated with or without the ethanol extract in the presence of denture cleanser. Live C. albicans in biofilm was counted by cultured colony forming unit value after inoculated on agar plate. Results: Ethanol extract from shiitake mushroom showed stronger antifungal activity against yeast type of C. albicans compared to its water extract. The ethanol extract significantly reduced count of C. albicans in hyphal biofilm (P < 0.05). Also, the ethanol extract showed synergistically antifungal effect with denture cleanser on candidal biofilm on denture base resin disk (P < 0.05). Conclusion: The ethanol extract of shiitake mushroom may be a candidate for preventing candidal stomatitis as well as denture-related stomatitis.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.37 no.3
• /
• pp.101-110
• /
• 2021

Purpose: In this study, we intended to study the change in bond strength according to the thermal cycling of provisional resin and 3D printed resin for making provisional restoration. Materials and Methods: Through DLP method, 3D printed resin powder was used to produce 3D printed resin samples. The samples were grouped into eight groups, according to types of provisional resin (PMMA, bis-acryl resin) which is to be bonded on the samples and numbers of thermal cycling (control, 2,000, 3,000, 5,000 cycles). Shear bond strength of the bonded samples was measured on the universal testing machine. Results: As the number of thermal cycling increased, the shear bond strength of PMMA and bis-acryl resin for 3D printed resins decreased except between 3,000 cycles and 5,000 cycles in PMMA groups. In the PMMA group, there were significant differences in shear bond strength between less number than 3,000 cycles (P < 0.05) and no significant differences between more number than 3,000 cycles (P > 0.05). In the bis-acryl resin group, there were significant differences in shear bond strength between control and 2,000 cycles, control and 3,000 cycles, and control and 5,000 cycles (P < 0.05), no significant difference between 2,000 and 3,000 cycles, between 3,000 and 5,000 cycles (P > 0.05). Conclusion: The shear bond strength between 3D printed resin and provisional resin tended to decrease after thermal cycling.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.4
• /
• pp.272-281
• /
• 2020

Agenesis of permanent tooth in adolescent patients can be treated either by orthodontic treatment for space closure or by maintaining the space until implant restoration can be carried out in adult. However, gradual atrophy of alveolar bone width makes it difficult to restore the prosthesis in the future or may cause unaesthetic results. Therefore, maintaining of not only the missing space but also the alveolar bone width should be considered. This case is a treatment whereby a temporary replacement of missing 2 mandibular incisors in adolescent patient was carried out using 2 temporary anchorage devices (TADs). Two TADs were placed horizontally 2 - 3 mm below the top of alveolar ridge, and fixed with artificial teeth by stainless steel wires extended. During the 2 year follow-up, neither gingival inflammation nor loss of the TADs have occurred. In the radiographic evaluation, the growth of the adjacent alveolar bone was not inhibited, and the width of the alveolar bone was maintained.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.37 no.4
• /
• pp.177-185
• /
• 2021

Clinical applications of translucent zirconia as well as traditional zirconia (3 mol% yttria stabilized tetragonal zirconia polycrystal, 3Y-TZP) are increasing. For this reason, studies on factors affecting the optical properties of dental zirconia have been continuously reported. The optical effect of dental zirconia may vary depending on the yttria content, the thickness of the prosthesis, the sintering process, polishing, glazing and cementation in laboratory and clinical procedures. Increasing the yttria concentration can reduce the masking effect. Translucency decreases as the thickness of the restoration increases, but the required thickness may vary depending on the properties of the zirconia block. The high-speed sintering method can shorten the manufacturing time, but in some cases, the translucency of the prosthesis may decrease. In addition, the optical properties can be affected by the surface roughness of zirconia and the polishing process. The use of an appropriate colored cement can help with the masking effect of zirconia and can be useful for color matching for more esthetic results.