• Title/Summary/Keyword: 교합기

Search Result 295, Processing Time 0.021 seconds

A study of sagittal condylar inclination and occlusal plane inclination of two semiadjustablearticulators with different reference plane (기준면이 다른 반조절성 교합기의 전방시상과로각과 교합평면경사각에 대한 연구)

  • Kim, Hyo-Jung;Lee, Sung-Bok;Choi, Dae-Gyun;Bak, Jin
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.46 no.4
    • /
    • pp.420-430
    • /
    • 2008
  • Statement of problem & Purpose: Articulators are very important for education and overall clinical situation in the field of prosthodontics, however preexisting articulators are designed and built based on maxillofacial structures and mean values of mandibular movement of Western people. Purpose of this research is to find out a adequate basis for applicating these articulators, presently used for clinical education, for Korean. Material and methods: 59 Korean adults (41 males, 18 females), aged between 24 to 41, where selected for this study. Two pairs of both maxillary and mandibular models were made for each examinee. These models where attached to both KaVo PROTARevo 7 and Hanau Modular semiadjustable articulators by using facebow transfer, than sagittal condylar inclination, occlusal plane inclination and position of mandibular on the articulator where measured. Result and conclusion: 1. Mean sagittal condylar inclination for KaVo PROTAR semiadjustable articulator was $33.75^{\circ}$(standard deviation $12.46^{\circ}$) meanwhile Hanau Modular semiadjustable articulator showed $40.72^{\circ}$(standard deviation $12.09^{\circ}$) for mean sagittal condylar inclination. 2. Mean occlusal plane inclination for KaVo PROTAR semiadjustable articulator was $-2.76{\circ}$(standard deviation $3.63^{\circ}$) meanwhile Hanau Modular semiadjustable articulator showed $11.87^{\circ}$ (standard deviation $3.63^{\circ}$) for mean occlusal plane inclination. 3. On the average center of the mandibular dentition were in the range of 5 to 7 mm of the central position of the articulator. Both anterior and posterior dentition were positioned at the center of the articulator vernacularly for KaVo PROTAR semiadjustable articulators, meantime for Hanau Modular semiadjustable articulator, anterior dentition was positioned 5 mm downwards and 3mm upwards for posterior dentition from vertically central position of the articulator.

임상가를 위한 특집 4 - 교합기를 이용한 교합안정장치의 제작

  • Kim, Seong-Taek
    • The Journal of the Korean dental association
    • /
    • v.47 no.6
    • /
    • pp.359-363
    • /
    • 2009
  • 지난 수십여 년 간 턱관저 및 저작근의 질환과 광범위한 보철 및 교정 수복 시 사용되었던 교합안전장치의 작용기전에 관하연느 아직 논란이 많다. 그러나 현재까지의 연구는 기존의 하악을 생리적으로 안정된 위치로 변화시킨다는 개념보다는 구강 내 장치가 위치함으로 인해 저작계의 행동변경(behavioral modification)으로 인해 구강 내 부기능적인 습관이 일시적으로 개선되는 것이라는 개념이 지배적이다. 좀 더 면밀히 말하면 이에 대한 보다 체계적인 연구가 필요한 게 사실이다. 본문에서는 그동안 사용되었던 여러 교합안전장치의 제작법 중에서 교합기를 이용하는 방법을 기공과정을 통하여 알아보고자 한다.

  • PDF

Occlusal Adjustment (교합조정)

  • Heo, Yeong-Gu
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.17 no.3
    • /
    • pp.189-193
    • /
    • 2001
  • 교합조정은 비가역적인 술식이므로 예방적인 목적으로 사용하는 것은 바람직하지 않으며 환자가 증상을 호소하거나 환자의 구강검사시 교합간섭으로 인한 증상이 확인된 경우라도 자연치에서의 교합조정술은 반드시 신중을 기해야 한다. 교합조정술을 시행하기 전에 먼저 하악의 위치가 안정되어야 한다는 것을 명심하고 이를 위해 치과의사는 하악의 중심위에 대한 이해와 중심위로의 하악유도 방법에 대한 숙지도 필요하다. 또한 심한 악관절 장애나 통증 및 불안정한 하악의 위치를 보이는 경우 구강내 교합상이나 교합 안정장치가 선행되어야 하는 경우가 있다. 교합조정술을 시행해야 하는 치과의사 자신이 교합조정술에 대한 지식을 충분히 습득하고 있어야 하며, 교합조정술의 적응증을 분명하게 확인한 뒤 조심스럽고 정확하게 시술을 시행해야 한다. 즉, 잘못된 교합조정으로 오히려 교합간섭을 야기할 수도 있음을 명심해야 한다. 그러나 교합조정에 대해 올바로 이해하고 일반적인 교합조정의 원칙을 지켜 정확히 시행한다면 교합조정은 결코 환자에게 해를 주지 않고, 자유로운 하악운동을 가능케 하며, 교합의 안정성을 유지해 줄 것이다.

  • PDF

Reconfiguration of occlusal plane by Esthetic mounting(OP1) : a case report (Esthetic mounting (OP1)을 사용하여 교합면 재구성을 시행한 증례)

  • Cho, Sang-Ho
    • Journal of the Korean Academy of Esthetic Dentistry
    • /
    • v.23 no.1
    • /
    • pp.4-15
    • /
    • 2014
  • A face-bow and an articulator have been used as crucial devices in a prosthodontic reconstruction of a collapsed occlusal plane. In order to avoid inaccuracy of median line in maxilla and the canted occlusal plane both of which may result from using a facebow with ear rods, a facebow that locate a patient's facial median line as reference line has been under development. A mounting technique that tries to bring a center of patient's face into line with the center of the articulator, called esthetic mounting, is currently employed to overcome the imprecision resulted from mounting with ear-bow transfer. We would like to study a case that used OP finder 1, one of the esthetic mounting techniques.

치과용 석고의 사용에 따른 물성 변화

  • 차성수
    • Journal of Technologic Dentistry
    • /
    • v.30 no.1
    • /
    • pp.149-153
    • /
    • 2008
  • 1. 석고를 보관할 때는 건조한 곳에 밀봉하여 보관해야 한다. 따라서 용기 포장을 일단 개봉하면 밀봉용기에 담아 보관하는 것이 바람직하다. 2. 혼수비는 석고의 기계적 성질에 영향을 주기 때문에 정상적인 혼수비를 지켜야 하며, 모형은 경화된 후에도 물과 닿지 않도록 주의한다. 3. rubber인상재의 경우 비눗물을 붓이나 스프레이타입으로 뿌려준 후 흐르는 물에 씻고, 물기를 제거한 후 석고를 주입하면 기포 발생을 줄일 수 있다. 4. 석고를 인상체내에 너무 높이 올려쌓아도 무게로 인해 변형 된다. 5. 석고가 tray밖으로 흘러나가도 변형된다. (공기와 접촉되어 경화된 석고가 아직 경화되지 않은 석고를 잡아당김.) 6. 인상체에서 분리한 모형은 요오드 스프레이를 제조자 설명서에 따라 뿌려 소독한다. 7. 교합기에 모형 부착 시 base끼리 bar나 성냥개비등 다른 고정장치로 고정 시켜야하고, 교합기를 위에서 눌러주어야 한다. 그렇지 않을시 교합관계가 높아질 수 있다. 8. 재료를 구입시 물리적 특성이 많이 기재되어 있는 제품을 선택한다.

  • PDF

THE PALATAL MORPHOLOGY OF THE CHILDREN WITH CLASS II DIV.1 MALOCCLUSION IN MIXED DENTITION : A STUDY USING THREE-DIMENSIONAL LASER SCANNER (혼합치열기 II급 1류 부정교합 어린이의 구개형태 : 3차원 레이저 스캐너를 이용한 연구)

  • Yang, Jung-Hyun;Lee, Sang-Hoon;Hahn, Se-Hyun;Kim, Chong-Chul
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.32 no.2
    • /
    • pp.270-277
    • /
    • 2005
  • The purpose of this study was to clarify the palatal volume and anterior palatal slope of the children with class II div.1 malocclusion and normal occlusion in mixed dentition(Hellman dental age III A) using three-dimensional laser scanner. Samples were consisted of 31 children with skeletal class II div.1 malocclusion in mixed dentition and 29 children with normal occlusion and profile among the contestants in 2000-2004 Healthy Dentition Contest in Seoul. Totally 60 maxillary study model were taken. Each cast was scanned by three-dimensional laser scanner (Breuckmann opto-TOP HE, INUS, Korea) and shaped into the three-dimension image by Rapidform 2004 program(INUS, Korea). And the palatal volume and anterior palatal slope of each cast were calculated by Rapidform 2004 program(INUS, Korea). The values were statistically compared and evaluated by independent samples t-test with 95% of significance level. The results were as follows: 1. Palatal volume was significantly lesser in children with class II div.1 malocclusion than that of normal occlusion in mixed dentition(p<0.05). 2. No significant difference in the anterior palatal slope and palatal height was found between the children with class II div.1 malocclusion and normal occlusion in mixed dentition(p>0.05). 3. Palatal length was significantly greater in children with class II div.1 malocclusion than that of normal occlusion in mixed dentition(p<0.01). 4. Intercanine and intermolar width were significantly lesser in children with class II div.1 malocclusion than those of normal occlusion in mixed dentition(respectively p<0.05 and p<0.01).

  • PDF