• Title/Summary/Keyword: 교통 상태 추정

Search Result 103, Processing Time 0.025 seconds

Development of Nonsurvey Method of Input-Output Analysis for Production and Attraction Freight Flow Estimation According to Region (지역별 발생집중 화물량 추정을 위한 산업연관분석의 Nonsurvey법 개발에 관한 연구)

  • AN, Sihyoung;IIDA, Katuhiro;MORI, Yasuo
    • Journal of Korean Society of Transportation
    • /
    • v.16 no.1
    • /
    • pp.79-98
    • /
    • 1998
  • 교통계획의 수립은 사람과 화물의 이동상태에 대한 파악으로부터 시작되며 화물이동상태를 파악 하기 위한 가장 기본적인 데이터는 지역별 발생집중 화물량일 것이다. 이러한 지역별 발생집중 화물량의 추계방법중 추계의 간편성과 경제상황변화의 반영이 용이하다는 점에서, 최근 학자들의 상당한 주목 을 받으며 연구되고 있는 것이 산업연관분석을 응용한 물류해석방법이다. 그러나 이방법은 대상지역의 산업연관표를 기본 data로 하기 때문에 해당지역의 산업연관표의 존재 여부에 따라서 그 적용범위가 제한된다. 이러한 문제점을 해결하기 위해서 연구되고 있는 방법이 Nonsurvey법이다. Nonsurvey법은 대 지역의 산업연관표로부터 그 지역에 포함된 소지역의 산업연관표를 여러 가지 보조적인 데이터를 이용해 서 간접적으로 추계하는 방법이다. 본연구에서는 이러한 Nonsurvey법의 하나로서 대지역의 산업연관표 와 지역분해된 각 소지역의 산업부문별 생산량만을 이용해서 각 소지역의 발생집중화물량을 추계하는 방법을 제안했다. 그리고 일본의 긴키(Kinki)지역과 이에 속하는 4부현을 대상으로 본연구의 방법으로 추계된 이출입양과 실제의 산업연관표상의 이출입량을 비교.분석함으로써 본 연구의 방법에 대한 검증을 실시했다. 본 연구에서 제아한 지역별 발생집중 화물량 추계방법의 특징은 다음과 같다. 첫째, 대지역내 각 소지역간의 이출입량이 분기계수라고 하는 산업관계표의 산업관계표의 행방향의 합에 대한 비율을 사용함으로서 간단히 추계가능 하다. 둘째, 추계된 소지역의 산업관계표는 대지역에 대한 시스템전체의 정합성이 유지된다. 셋째 분해되는 소지역의 수에 관계없이 각소지역의 이출입양에 대한 추계가 가능하다.

  • PDF

Estimation of Freeway Traffic Accident Rate using Traffic Volume and Trip Length (교통량과 통행길이를 고려한 고속도로 교통사고 예측 연구)

  • Baek, Seung-Geol;Jang, Hyeon-Ho;Gang, Jeong-Gyu
    • Journal of Korean Society of Transportation
    • /
    • v.23 no.2
    • /
    • pp.95-106
    • /
    • 2005
  • Road accidents are considered as the result of a complex interplay between road, vehicle, environments, and human factors. Little study, however, has been carried out on the attributes of human factor compared to the road geometric conditions and traffic conditions. The previous researches focused on mainly both traffic and geometric conditions on specific location. Therefore, it's hard to explain phenomenon of the high traffic accident rates where road and traffic conditions are good. Because of these reasons, accident analysis has contributed on geometric improvement and has not contributed on traffic management such as selection of attention section, driver napping alert, etc. The freeway incident management is also associated with reliable prediction of incident occurrences on freeway sections. This paper presents a method for estimating the effect of trip length on freeway accident rate. A PAR (Potential Accident Ratio), the new concept of accident analysis, considering TLFDs (Trip Length Frequency Distributions) is suggested in this paper. This approach can help to strengthen freeway management and to reduce the likelihood of accidents.

Multi-Color Threshold Model For Traffic Sign Detection (교통표지판 검출을 위한 다중 색상 임계값 모델)

  • Woo, Byeong-Dae;Choi, Yeong-Woo;Byun, Hye-Ran
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2013.05a
    • /
    • pp.226-228
    • /
    • 2013
  • 본 논문은 실제 주행 도로영상에서 교통표지판을 검출하기 위하여 다중 색상 임계값 모델을 이용한 색상 분할 방법을 제안한다. 제안하는 방법은 하나의 모델을 이용하는 기존의 색 분할 방법과 달리 다양한 조명 환경에서도 동작할 수 있는 다중 색상 모델을 사용한 방법이다. 모델 생성을 위해 각 조명 모델에 해당하는 학습용 데이터를 이용하여 모델의 임계값 범위를 추정한다. 이 과정에서 임계값의 범위는 상위 0.5%와 하위 0.5%를 제외한 픽셀 값 분포에서의 최대 및 최소값으로 결정한다. 제안한 방법을 이용하여 다양한 조명 상태에서의 교통표지판도 검출이 가능하다.

Analyzing Relationship between Road Traffic Flows and Noise Trend using Korea Highway Traffic Noise Model (KHTN을 이용한 교통류 특성과 교통소음추이 분석)

  • Choi, Yoon Hyuk;Kim, Cheol Hwan
    • Journal of Environmental Policy
    • /
    • v.11 no.3
    • /
    • pp.49-65
    • /
    • 2012
  • Road traffic noise is closely related to road traffic environment, including traffic volumes by type and travel speed. In this study, we stated some issues and analyzed the relationships between road traffic noise and traffic flow characteristics. First, in attempt to find the answer to the question "When does the loudest traffic noise occur?" we reviewed the issue in the terms of traffic flow. As a result of analyzing level of service through Korea Highway Traffic Noise model, the actual maximum noise occurred in level of service D rather than level of service E, on the capacity state. It shows that maximum noise would be most likely to occur right before and after the peak hours. Second, this paper was looking for the method of a more easy and accurate traffic speed estimation to predict traffic noise. This paper proposed sketch planning techniques of speed-volume curve by level of service on Korea Highway Capacity Manual. As a result of trend line modeling, it was judged that quadratic form is a suitable function, and coefficient of determination ($R^2$) was higher than 0.96, respectively.

  • PDF

Estimating the appropriate Level of Transit Fare Discount for Transfer Passengers (대중교통 환승요금 적정 할인수준 추정 - 서울시 사례를 중심으로 -)

  • 황기연;이우철
    • Journal of Korean Society of Transportation
    • /
    • v.18 no.2
    • /
    • pp.27-37
    • /
    • 2000
  • 본 연구의 목적은 대중교통수단간 환승할인제도를 서울시에서 도입할 경우 할인의 대상적 범위를 확정하고 할인율을 결정하는 것이다. 최적대안을 찾기 위해 서울시 교통혼잡관리를 위해 개발된 SECOMM 모형의 수단 선택패러미터값을 활용한 모의분석방법을 사용하였다. 본 연구에서는 공간적인 범위를 서울시로 한정했고, 환승 할인 대상에서 마을버스와 좌석버스가 제외하였다. 모의분석결과 서울시에서 단기적으로 시행가능한 환승할인제도는 버스와 지하철간의 환승만을 대상으로 기존 요금을 500원에서 600원으로 100원씩 인상한 상태에서 이후 수단에 대해 30%가지 할인을 해주는 안이 현실적으로 가장 도입가능성이 높은 대안으로 분석되었다. 이 경우 지하철 이용수요는 0.2% 가까이 늘어나는 대신 버스이용자는 다소 감소할 것으로 분석되었으며 연간 802억원에 가까운 요금수입 증대효과가 나타날 것으로 분석되었다. 한편, 요금의 인상이 없을 경우 이후 수단에 대해 30%를 할인해 준다면 (버스-버스 환승할시) 연간 2,000억 이상의 정부지원이 전제되어야하며 그 이상 할인해줄 경우는 적자규모가 급격하게 늘어나기 때문에 현재 운영기관의 재정여건을 감안할 때 도입하기 힘든 대안으로 분석되었다. 본 연구결과는 분석시 버스와 지하철의 다양한 요금유형을 충분하게 반영하지 못했고 오전첨두시 데이터로 요금에 대한 민감도가 낮은 문제가 이으며, 모의분석 결과이기 때문에 현실에 적용하는데 있어서는 운영기관 실무진들의 추가적인 검토가 필요할 것으로 판단된다. 또한 실행을 위해서는 환승할인이 인정되는 시간간격, 할인 방식, 버스하차시 시간기록장치 설치여부 등이 선결되어야 할 것으로 판단된다.

  • PDF

An Application of GSIS Technique for Transportation Planning Model (교통계획모형에 있어서 GSIS의 적용기법)

  • Yang, In-Tae;Choi, Young-Jae
    • Journal of Korean Society for Geospatial Information Science
    • /
    • v.1 no.2 s.2
    • /
    • pp.105-112
    • /
    • 1993
  • The conventional method for solving transportation problems were mainly based on numerical methods, where the understanding of outputs is not easy. Some difficulties come from the seperation of three key steps-the preparation of input for transportation traffic simulation, and model output interpretation. GSIS can help to eliminate some of thoses difficulties by combining graphics, database, and transportation plaining models. As pilot study, this study shows an application of Geovision GSIS to TRANPLAN transportation planning model that is based on four-step travel demand forecasting procedure. Accrued benefits and procedure are presented.

  • PDF

Performance Evaluation of Asphalt Concrete Pavements at Korea Expressway Corporation Test Road (시험도로 아스팔트 포장의 공용성 변화 분석)

  • Seo, Youngguk;Kwon, Soon-Min
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.28 no.1D
    • /
    • pp.35-43
    • /
    • 2008
  • This paper mainly deals with the performance evaluation of 33 asphalt sections of Korea Expressway Corporation Test Road (KECTR) during the past four years. Since the construction of the KECTR in December 2002, key performance indicators of asphalt pavements have been collected five times with an Automatic Road Analyzer (ARAN), and have been analyzed for permanent deformation, surface distress, and road roughness. Linear viscoelastic characteristics of four dense graded HMAs used in KECTR were investigated with a series of complex modulus test. The effect of air void in HMAs on dynamic modulus was investigate at two air void contents for a surface course HMA (19 mm Nominal Maximum Size of Aggregate). Layer densification due to traffic was estimated from air void contents of field cored samples, and was correlated with pavement distresses and performances. One of findings of this study was that both permanent deformation and cracking were suspectible to pavement temperatures, rather than traffic. However, it was found that road roughness was mostly affected by traffic loading.

Correlation between Proximity Noise Measurement Method (CPX) and Roadside Measurement Method (SPB) for Road Traffic Noise (도로교통소음에 대한 근접소음 측정법(CPX)과 통과소음 측정법(SPB)의 상관관계)

  • Yoo, In-Kyoon
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.21 no.12
    • /
    • pp.310-319
    • /
    • 2020
  • Korea estimates the traffic noise by measuring the total traffic noise when the traffic passes (SPB; Statistical Pass-By). Another method (CPX; Close Proximity) directly measures the tire/road noise by installing a microphone near the tire. The CPX method is not a formal test method in Korea. There has been little research between CPX and SPB. This study proposes a method for estimating SPB, using the CPX, which is easy to measure. This study used the results of a large-scale test conducted by Korea Expressway Corporation (KEC) and a research paper on CPX in this section. The results by the KEC showed that the low noise pavement has a noise reduction of 10.4dB. In CPX research, the noise reduction was 10.7dB and was similar to 10.4dB in SPB. This study shows why the noise reduction is the same regardless of the position, the reason that the amount of noise reduction is similar, the difference of the noise according to the position of the microphone using the concept of noise summation and distance reduction. This study shows that including the CPX as a variable in the traffic noise prediction program is very important to improve noise prediction reliability.

Improving Methods for Estimating Transportation Mode Choice Model in Busan-Ulsan Metropolitan Area (부산·울산광역권 교통수단 선택모형 구축 방법론 개선)

  • Shin, Kangwon
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.15 no.7
    • /
    • pp.4580-4587
    • /
    • 2014
  • This study provides an improved transportation mode choice models applicable to the Busan-Ulsan Metropolitan area by scrutinizing previous study results developed using the multinomial logit model. Although the previous model has an appropriate modeling structure in terms of the sign of coefficient estimates and goodness-of-fit, the model ignores the total number of trips and traffic congestion condition between the two zones and partially reflects zone-specific variables and choice set. Therefore, this study considered all of these modeling faults by re-constructing the representative utility functions. The modeling results show that travelers in Busan-Ulsan metropolitan area tend to choose their mode using mode-specific characteristics rather than the classical travel time and/or cost variables.

A Study of Improvement of Urban Pavement Maintenance Technique based on Pavement Condition Evaluation and FWD Data (도로포장 표면조사와 FWD정보에 기반한 도심지 도로포장 유지보수 기법 개선방안 연구)

  • Lee, Sangyum
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.17 no.12
    • /
    • pp.532-541
    • /
    • 2016
  • The objective of this paper is to support accurate pavement condition assessment and decision of proper maintenance method and time by conducting visual inspection and calculating the remaining life of pavement from falling weight deflectometer(FWD) data. Each was implemented in the same long-term performance pavement(LTPP) sections. Visual inspection was executed to measure pavement condition indices such as crack, rutting and international roughness index(IRI) and the Seoul Pavement Index(SPI) was calculated based on these results. The dynamic modulus was back-calculated from the FWD data. The remaining pavement lives were determined from equivalent single axle loading(ESAL) and FWD data. Correlation of maintenance priority by each result value was examined. Consequently, the correlation between remaining life to Crack and Rutting was higher than the other factors or indicesbecause IRI is not related to FWD value and SPI value consists with IRI value and other indices. The R-square value of correlation of FWD with Crack and Rutting was 0.65, which indicated an insufficient correlation. Consequently, when decision of maintenance of method, time, etc. is determined, FWD data have to be considered with Crack and Rutting because of those relations.