• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.2
• /
• pp.255-260
• /
• 2017

In Korea, traffic accidents between pedestrians and vehicles in 2015 account for 38.8% of all accidents. This study proposes a system design that can measure the risk of conflict between a vehicle and a pedestrian. Firstly the systemdetect and estimate the position, speed, and directional data of the vehicle and the pedestrian. And then it estimate the conflict point between a vehicle and a pedestrian. The risk of conflict is quantified by estimating the pedestrian safety margin (PSM), which is the time difference between the arrival of the pedestrian at the crossing point to the point of conflict and the vehicle approaching the point. In this system each data is acquired through an external monitoring based evaluation module and an individual wearing module. In the future, such a system can be used for decision making such as the design of road hazard improvement facilities and the designation of the elderly protection area.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5A
• /
• pp.631-639
• /
• 2008

This paper reports the mode shapes of Seohae cable-stayed bridge extracted by TDD technique. In order to record total 72 acceleration points in the vertical direction of the bridge deck, a custom made data acquisition system with LAN communication has been especially developed and a set of ambient vibration tests has been conducted. For the measured acceleration responses, total twenty four mode shapes up to 2Hz has been extracted by TDD technique. The extracted mode shapes include many new modes that have not been identified in the current on-line health monitoring system installed in the bridge. It is confirmed that TDD technique is the most effective in extracting the high resolution mode shapes on a particularly long span bridge.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.2
• /
• pp.163-168
• /
• 2008

Ship detection from satellite remote sensing is a crucial application for global monitoring for the purpose of protecting the marine environment and ensuring marine security. It permits to monitor sea traffic including fisheries, and to associate ships with oil discharge. An automatic ship detection approach for RADARSAT Fine Synthetic Aperture Radar (SAR) image is described and assessed using in situ ship validation information collected during field experiments conducted on August 6, 2004. Ship detection algorithms developed here consist of five stages: calibration, land masking, prescreening, point positioning, and discrimination. The fine image was acquired of Ulsan Port, located in southeast Korea, and during the acquisition, wind speeds between 0 m/s and 0.4 m/s were reported. The detection approach is applied to anchoring ships in the anchorage area of the port and its results are compared with validation data based on Vessel Traffic Service (VTS) radar. Our analysis for anchoring ships, above 68 m in length (LOA), indicates a 100% ship detection rate for the RADARSAT single beam mode. It is shown that the ship detection performance of SAR for smaller ships like barge could be higher than the land-based radar. The proposed method is also applied to estimate the ship's dimensions of length and breadth from SAR radar cross section(RCS), but those values were comparatively higher than the actual sizes because of layover and shadow effects of SAR.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.1
• /
• pp.31-37
• /
• 2024

In this study, we propose a machine vision-based pedestrian signal detection algorithm that operates efficiently even in computing resource-constrained environments. This algorithm demonstrates high efficiency within limited resources and is designed to minimize the impact of ambient lighting by sequentially applying HSV color space-based image processing, binarization, morphological operations, labeling, and other steps to address issues such as light glare. Particularly, this algorithm is structured in a relatively simple form to ensure smooth operation within embedded system environments, considering the limitations of computing resources. Consequently, it possesses a structure that operates reliably even in environments with low computing resources. Moreover, the proposed pedestrian signal system not only includes pedestrian signal detection capabilities but also incorporates IoT functionality, allowing wireless integration with a web server. This integration enables users to conveniently monitor and control the status of the signal system through the web server. Additionally, successful implementation has been achieved for effectively controlling 50W LED pedestrian signals. This proposed system aims to provide a rapid and efficient pedestrian signal detection and control system within resource-constrained environments, contemplating its potential applicability in real-world road scenarios. Anticipated contributions include fostering the establishment of safer and more intelligent traffic systems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.77-84
• /
• 2017

Recently, interest in safety has been increasing in every area, especially in the field of transportation. The accurate evaluation of the stability of road facilities is needed to improve the level of safety in the field of transportation and the application of new technologies is required to reduce the number of natural disasters. In this study, the wind data were compared and analyzed according to the type of measurement, and an evaluation of the stability of road signs using the wind data was conducted. In addition, a stability plan to secure road signs was elaborated and its effect on the wind load was analyzed. It was found that the wind data measured by a mobile atmospheric observing system (MAOS) was 2.43 times bigger than that measured by the Korea meteorological administration (KMA) and road weather information system (RWIS). In terms of their stability, the road signs were susceptible to failure caused by gusty winds and it was found necessary to ensure their stability. In the future, it will be possible to evaluate the stability of road facilities using road line weather data and the application of wind load reduction technologies is expected to improve road safety.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.11a
• /
• pp.298-301
• /
• 2014

최근까지의 교통사고 통계에 따르면 주간 보다는 야간에 더 많은 사고가 발생하며, 사고 원인 중 하나는 부적절한 조명 시설로 인한 시야 미확보, 눈의 피로감 증가가 중요한 요소이다. 본 논문에서는 스마트폰 기반으로 야간 도로 밝기 측정 어플리케이션을 구현하여 야간에 부적절한 조명 시설이 설치된 지점을 파악하기 위해서 위치 정보와 밝기 정보, 이동 방향 정보를 실시간으로 데이터베이스에 저장하여 모니터링해주는 시스템을 설계 및 구현하였다. 이를 위해, 안드로이드 NDK을 이용하여 Native 환경에서 차선 검출 및 RGB 색 공간의 값을 휘도 값으로 변환 알고리즘을 작성하였다. 또한 스마트폰의 카메라를 이용하여 실시간으로 도로 영상을 입력 받은 후 ROI 설정 하여 연산 속도를 향상시켰고, 차선 검출을 통해 차선 사이의 도로 밝기 정보를 획득하고 GPS 센서를 이용하여 이동 방향 정보와 위치 정보를 획득하여 데이터베이스에 저장하였다. 어플리케이션 사용자들의 주행 정보를 바탕으로 도로 밝기 값 데이터베이스를 활용하여 눈부심 및 조명관련 사고 위험 구간을 자동으로 알려주는 후속 연구를 진행할 수 있을 것으로 기대한다.

• Korean Journal of Remote Sensing
• /
• v.37 no.3
• /
• pp.559-566
• /
• 2021

It is necessary to quickly detect and respond to ship accidents that occur continuously due to the influence of the recently increased maritime traffic. For this purpose, ship detection research is being actively conducted based on satellite images that can be monitored in real time over a wide area. However, there is a possibility that the wake may be falsely detected as a ship because the wake removal is not performed in previous studies that performed ship detection using spectral characteristics. Therefore, in this study, ship detection was performed using SDI (Ship Detection Index) based on the Sentinel-2A satellite image, and the wake was removed by utilizing the difference in the spectral characteristics of the ship and the wake. Probability of detection (POD) and false alarm rate (FAR) indices were used to verify the accuracy of the ship detection algorithm in this study. As a result of the verification, POD was similar and FAR was improved by 6.4% compared to the result of applying only SDI.

• Journal of the Society of Disaster Information
• /
• v.16 no.2
• /
• pp.310-317
• /
• 2020

Purpose: In this study, the characteristics of hazardous chemical transport vehicle accidents during the last six years from 2014 to 2019 was analyzed. This study is to prevent chemical transport accidents. Method: Using statistics from the Ministry of Environment, chemical transport vehicle accidents were classified into accident type, accident cause and vehicle type. Result: Of the total 506 cases chemical accidents, 105 cases were caused by transport vehicle. More than 20 percent of total accidents were reported. Most of the accidents were caused by spill·leak. The main causes of the accident were traffic accidents(49 cases) and management negligence(29 cases). This was more than 74% of all transport vehicle accidents. By vehicle type, 57 cases(54%) were most common in tank lorries, followed by trucks (39 cases, 37%) and trailers (9 cases, 9%). Conclusion: In order to prevent accident of transport vehicle, thorough inspection of the transport vehicle is required and safe operation of the driver. In addition, the government needs to expand real-time monitoring of transport vehicles and comprehensively manage different systems by the relevant ministries.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.4
• /
• pp.745-756
• /
• 2020

An ICS(industrial control system) is a complex system that safely and efficiently monitors and controls industrial processes such as electric power, water treatment, transportation, automation plants and chemical plants. Because successful cyber attacks targeting ICS can lead to casualties or serious economic losses, it becomes a prime target of hacker groups sponsored by national state. Cyber campaigns such as Stuxnet, Industroyer and TRITON are real examples of successful ICS attacks, and were developed based on the deep knowledge of the target ICS. Therefore, for incident investigation of ICSs, inspectors also need knowledge of control processes and accident investigation techniques specialized for ICSs. Because there is no applicable technology, it is especially necessary to develop techniques and tools for embedded controllers located at cyber and physical boundaries. As the first step in this research, we reviewed logging capability of 4 PLC(Programmable Logic Controller)s widely used in an ICS area, and checked whether selected PLCs generate logs that can be used for digital investigation in the proposed cyber attack scenario.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.7
• /
• pp.449-455
• /
• 2016

Fog causes economic losses in transportation. It also results in health problems when it is combined with air pollutants. Considerable research efforts have focused on developing fog removal systems. However, most systems operate themselves after monitoring the fog. Additionally, continuous energy supply and maintenance are required to retain the fog-removal efficiency of the system. This study included the demonstration of a moss filter (a polyolefin mesh interlaced with moss) as a fog-removal method overcoming the limitations of the fog removal system. Three types of mosses with different surface structures were investigated to elucidate the relation between the moisture absorption rate and the structures. Among the different moss types, Hypopterygium japinicum showed the highest efficiency based on the smallest pore diameter and the largest total pore area. The visibilities with the moss filter and the polyolefin mesh were compared to perform the fog removal tests. The moss filter could provide a cost-effective and eco-friendly fog removal system with sustainability.