• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.2D
• /
• pp.99-103
• /
• 2010

It is necessary to improve transfer impedance of express bus terminal users in order to increase the usage of public transportation. This study constructed a model for calculating transfer impedance based on bodily sensational transfer time in express bus terminal and calculated transfer impedance on major express bus terminals in Korea. The study results show that the addition of 100 meter exterior walking distance increases 3 minute travel time, 100 meter interior walking distance increases 5 minute travel time, 100 stairways increase 13 minute travel time, and escalators decreases 3 minute travel time. The calculated transfer impedance based on bodily sensational transfer time in this study can be utilized as objective criteria to compare transfer conditions of different bus terminals and to prioritize them for facility improvement. The calculated transfer impedance also can be used as facility guidelines for designing a new transit center.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.6
• /
• pp.688-696
• /
• 2023

In the present study, free roll decay and resistance performances of fishing vessels were evaluated with the combinations and variations of in the parameters of appendages which are attached to improve motion performance of fishing vessels. Computational Ffluid Ddynamics was used to perform free roll decay and resistance analysis. The roll period and decay coefficient were derived by the variations in the combination and dimensions of the primary appendages of the bilge keel and the under keel. It was observed thatThe variations of in the length of the under keel did not significantly impact to the roll damping coefficient. Conversely, for the bilge keel, an increase in the length and angle resulted in an increase in the roll damping coefficient. Comparison of resistance performance was additionally assessed among the selected hulls with the appendages and bare hull. The resistance of the hull with the appendages was higher than that of the bare hull due owing to the changes of in the pressure on the surface of the hull and trim angle. Throughout the present study, the impact of appendage parameter and arrangement on the free roll decay and resistance performance of fishing vessels were was assessed,. which This will be beneficial for the application of appendages to fishing vessels.

• Journal of Korean Society of Transportation
• /
• v.18 no.4
• /
• pp.19-30
• /
• 2000

The purpose of the Paper is to estimate values of transfer related variables on route choices of subway users in Seoul. Four attributes were estimated affecting route choices, i.e. in-vehicle time, transfer time, number of transfers and existence of escalators. Stated preference and revealed preference techniques were used to estimate these values. The values of transfer related variables can be shown by in-vehicle time equivalents. One minute of transfer is 1.5∼2 times one minute of in vehicle times one time of transfer is 10∼15 times, and the existence of escalator is 2∼8 times. Women generally show stronger impedance than men and the elder does than the younger. Working, commuting and educational trips show stronger impedance than others too.

• Journal of the Korean Institute of Gas
• /
• v.26 no.1
• /
• pp.27-33
• /
• 2022

As the scale of explosions diversifies along with the expansion of gas handling and storage facilities, studies on explosion-proof facilities in preparation for accidents is being actively conducted. The gastight door blocks the expansion pressure caused by blast waves or internal fires, and at the same time protects the personnel and equipment inside. For gastight doors, the regulations related to explosion-proof design are not clearly presented, and studies on the explosion pressure resistance performance evaluation of the facility are insufficient. In this study, the gastight door was modeled in a 3D shape with reference to the regulation ASTM regarding the gastight door standard. Afterwards, evaluation for blast-resistant performance of gastight door using Numerical simulation was evaluated by using ANSYS Explicit Dynamics to compare the deformation.

• Journal of Korean Society of Transportation
• /
• v.8 no.2
• /
• pp.99-107
• /
• 1990

This research addresses the effect of heavy vehicles (especially trucks) in terms of passenger car Equivalents from a capacity viewpoint. A formulation that estimate PCE in this paper is derived by introducing appropriate headway measurements into Huber's general equation for PCEs. In this equation, PCE value is expressed in terms of headways for four different kinds of pairs; pairs of leading and following vehicles ; P-P, P-T, P-T, T-T. The mean value of headway for each case is estimated through the regression analysis. Finally, the approach used in this research was compared with macroscopic approach which analyzed a speed-density relationship to evaluate PCE.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1607-1608
• /
• 2015

현대사회의 고속 고급 교통수단에 대한 요구에 부응하고, 고유가 및 온실가스 등 원유 기반의 교통 시스템의 문제를 해결하기 위해 교통 수단의 다양화 연구가 활발히 진행되고 있다. 석유문제가 심각한 상황으로 전개될 경우, 대륙과 대륙 그리고 국가와 국가 사이의 장거리 이동을 할 수 있는 교통수단은 전기로 추진되는 철도이다. 현재 대중화 되어있는 바퀴 식 철도차량은 초고속 운전 시 기하급수적으로 증가하는 소음, 공기저항 동력 전달의 한계, 레일의 마모라는 문제를 가지고 있으며 이러한 문제점을 가진 철도차량의 대안으로 선형 추진 시스템 연구가 진행 중이다[1] 국내에서는 LSM(Linear Synchronous motor)에 대한 연구가 활발히 진행되고 있으나 LPM 기반 철도 차량 추진시스템에 대한 연구는 이루어지지 않고 있다. 그러나 LSM 추진 시스템에 비하여 LPM 추진 시스템은 우수한 등판 능력, 광역범위의 주행 가능 영역, 경량화에 따른 높은 에너지 효율, 건설비 저감등 다양한 장점을 가지고 있으며 충분한 전략성을 가지고 있다.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2017.11a
• /
• pp.123-124
• /
• 2017

최근에 장시간 근무로 인한 대중교통 운전자들의 부족한 휴식과 수면, 통증, 정신적 스트레스 등은 피로 누적를 초래하여 대중교통 사고의 주요 원인으로 대두되고 있다. 이에 2016년 산업통상자원부 산업융합촉진사업의 일환으로 대중교통 운전자용 다중 생체 신호측정 스마트 의류 및 관련 시스템이 개발중에 있으며 본 논문에는 현재 개발중인 스마트웨어러블 의류의 내세탁성능에 대한 성능 시험방법을 제안하고자 한다. 성능시험 방법은 국내외 생체신호측정 스마트 의류의 care label(취급표시사항)을 통하여 hand wash의 조건으로 세탁을 표시하고 있으나, 1년의 warranty를 위한 시험을 위해서는 오랜기간이 필요하기 때문에, 좀더 가혹한 조건으로 진행하여 시간을 줄이고, 고객의 빠른 시장출시를 지원하도록 시험방법을 제안하였다.

• Journal of the Korean Society for Railway
• /
• v.6 no.2
• /
• pp.22-32
• /
• 2003

차륜없이 전자석에 의해 부상하고, 리니어모터에 의해 추진하는 시스템이다. HSST의 가장 큰 장점은, 접촉지짖에 의한 저소음 및 공기저항외에는 주행저항이 없기 때문에 고속주행이 가능하다. HSST도 당초에는 최고속도 200∼300km/h 정도의 시스템 HSST-200, HSST-300 타입을 목표로 개발을 진행해왔지만, 최근에는 급구배 및 급곡선 통과가 가능한 특성을 활용하여 도시내 교통을 대상으로 하는 최고속도 100km/h 정도의 시스템 HSST-100 타입 개발에도 주력함으로써 실용화에 달하고 있다. 경량전철로서의 취급하고 있는 시스템은 HSST-100 타입이다.(중략)

• Journal of the Korean Geotechnical Society
• /
• v.17 no.4
• /
• pp.191-198
• /
• 2001

국내 도로포장의 주요 파손형태는 주변환경 및 반복 교통하중 조건에 의한 소성변형(rutting), 피로균열, 반사균열, 온도균열 등이 있는데, 포장이 설계수명에 도달하기 이전에 주로 발생하며 이로 인한 도로포장의 유지관리에 막대한 국가예산이 낭비되고 있는 실정이다. 본 연구에서는 토목섬유 아스팔트 포장 시스템을 체계적으로 정립하기 위해 휠트래킹 시험과 균열저항성 시험을 수행하여 토목섬유 아스팔트 포장의 소성변형 및 균열 저항성을 분석하였다. 이러한 실험결과를 통해 아스팔트 포장에서의 토목섬유 보강 효과가 평가되었다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.1
• /
• pp.9-20
• /
• 2023

For highway concrete structures, the deterioration of the structure is accelerated due to the increase in the use of deicing materials, and sectional repair work is being frequently carried out to restore performance. However, after the repair work, re-damage such as cracks, delamination, and poor bond performance is exhibited in the repaired sectional area. In this study, overseas repair material requirements were first analyzed, and present domestic requirements were improved repair material performance through field surveys of common concrete structures, laboratory experiments, and test construction on a disused concrete bridge. In addition, performancebased quality requirements were presented so that all materials that meet the required performance can be applied, and different test methods for each material were unified into concrete test methods for consistent test results analysis. The considered performance requirements were compression strength, bending strength, and bond strength for structural properties, and length change rate, crack resistance, thermal expansion coefficient, and elasticity coefficient were for dimensional behavior. For resistance to chloride penetration resistance and freeze-thaw resistance were presented as durability. The proposed requirements for concrete repair materials are expected to contribute to the improvement of the quality of concrete sectional repair work in Korea.