• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.1D
• /
• pp.61-70
• /
• 2010

In case of low benefit project with low traffic or high-priced project, existing analysis of cost and benefit tends to present a low feasibility. However, considering the improvement of environment, intensification of disaster prevention, public stability of countryside area and formation of good scenery, these projects can have a feasibility. This paper analyzes and summarizes the indirect benefit of some ripple effects, caused by road projects, and presents the methodology and process in order to change the indirect benefit into monetary value.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.2
• /
• pp.68-75
• /
• 2015

This study established key factors causing deck slab deterioration based on GPR database of 747 highway bridges, and predicted deck slab damage rates with respect to bridge service life. To minimize the influence of bridge service life on deck slab deterioration, the deck slab damage rate database was corrected based on a linear regression model of bridge service life vs. deck slab damage rate. The corrected deck slab damage rates were analyzed to determine correlation considering the number of snowy days, the amount of snowfalls, the number of freeze-thaw days, average winter temperature, altitude, the amount of deicing chemicals and equivalent traffic volume, and then both the number of freeze-thaw days and the amount of deicing chemicals were determined to be key factors causing deck slab deterioration. The complex deterioration considering both key factors was represented deck slab damage rate charts, and the average deck slab life was derived. The results of this study will be used as a guideline for highway bridge maintenance to identify the progress of deck slab deterioration for a given bridge and predict the time required deck slab rehabilitation.

• Journal of Korean Society of Transportation
• /
• v.28 no.5
• /
• pp.65-75
• /
• 2010

The objective of this paper is to quantify economic values of parcel service attributes (safety, reliability, quickness, and kindness and customer service) using the contingent choice method and to investigate impact factors (such as sex, age, and education), which influence choice of desirable parcel services. As empirical results, the marginal willingness-to-pay for multiple attributes of parcel service is calculated as about 2,349.6 KRW for the safety attribute, about 829.3 KRW for the reliability attribute, about 588.5 KRW for the quickness attribute, and about 358.8 KRW for the kindness and customer service attribute, according to the estimation model without covariates. The overall results indicate that the safety attribute ranks highest among parcel service attributes, followed by the reliability attribute, quickness attribute, and kindness and customer service attribute. These results can be useful in the decision-making process for establishing desirable pricing policies for parcel service.

• Journal of Korean Society of Transportation
• /
• v.23 no.1
• /
• pp.93-102
• /
• 2005

An Origin-Destination (O/D) is considered as one of the important information in route choices and trip assignments. A household interview survey is deemed to be the traditional and the most widely used method in making sample O/D and its conversion to the total O/D. Some researchers have studied to estimate dynamic O/D from the relationship between link volumes and trip assignment model. Nowadays, owing to the recent rapid spread of cellular phones. Location information of the cellular phone through the Base Station(BS) is considered as an alternative to O/D estimation. In this study, the methodology of generating BS-based O/D and the methodology of converting this O/D into an administrative district-based O/D are proposed. The information of GPS positions and cellular BS positions have acquired by establishing GPS equipment and cellular phone on taxies in Cheongju. Three weeks data are collected and used in estimating O/D by matching them on a digital map. Scatter diagram and sample correlation coefficients are used to investigate the similarity of the GPS-based O/D pattern among weeks, among days, and among times in day. The results show that there are few significant differences among weeks. But there is a difference in O/C pattern between weekday and weekend. Furthermore, there is a difference between morning peak and afternoon peak. Two methodologies are proposed to convert BS-based O/D into an administrative district-based O/D. The first one is to use the distribution pattern of GPS coordinates, the other is to use the coverage area of the BSs. To validate such converted O/D, GPS O/D is used as a true value. The statical analyses through scatter diagram, MAE and RMSE shows that there is few significant defference of pattern between the estimated BS-based O/D and GPS O/D. In the case of using only cellular information, the methodology using coverage area of the BSs is recommended for estimating O/D.

• Journal of Korean Society of Transportation
• /
• v.28 no.6
• /
• pp.133-146
• /
• 2010

The objective of this study is to develop a supply chain-based freight distribution channel choice model considering shippers' logistics behaviors which will be used for freight demand estimation. For this purpose, this study utilized the distribution channel data of the petrochemical and automobile industries collected by KTDB center. The distribution channel choice models for these industries were developed by including transport mode, time, cost, and shipment size. It was found that the multinomial logit model with transport cost, time and shipment size is the best, and as shipment increases, bigger transport mode is preferred. Generally direct distribution channel with small truck was preferred over the one using distribution center and/or big truck.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.6
• /
• pp.1655-1665
• /
• 2014

Dynamic displacements of structures shows general behavior of structures. Generally, It is used to estimate structure condition and trustworthy physical quantity directly. Especially, measuring vertical displacement which is affected by moving load is very important part to find or identify a problem of bridge in advance. However directly measuring vertical displacement of the bridge is difficult because of test conditions and restriction of measuring equipment. In this study, Artificial Neural Network (ANN) is used to suggest estimation method of bridge displacement to overcome constrain conditions, restriction and so on. Horizontal strain and vertical displacement which are measured by appling random moving load on the bridge are applied for learning and verification of ANN. Measured horizontal strain is used to learn ANN to estimate vertical displacement of the bridge. Numerical analysis is used to acquire learning data for axis strain and vertical displacement for applying ANN. Moving load scenario which is made by vehicle type and vehicle distance time using Pearson Type III distribution is applied to analysis modeling to reflect real traffic situation. Estimated vertical displacement in respect of horizontal strain according to learning result using ANN is compared with vertical displacement of experiment and it presents vertical displacement of experiment well.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.4
• /
• pp.531-544
• /
• 2024

The purpose of this study is to analyze traffic flow characteristics according to the market penetration rate (MPR) of autonomous vehicles (AV) on road sections where bus rapid transit (BRT) is actually operating. Furthermore, the maximum traffic volume was set through estimation of future traffic demand, and traffic flow characteristics were analyzed through traffic simulation for each scenario considering of a combination of BRT introduction and AV's MPR. To test statistical significance, Kruskal-Willis test and Jonckheere-Terpstra test were used to examine the impact of the market penetration rate of Autonomous vehicles on travel time and delay time etc. At the same time, the existence of the order relationship among travel time data according to the market penetration rate of autonomous vehicle was examined. As a result of the analysis, it was founded that the travel time significantly decreased as the MPR of AV increases in both intermittent flow and continuous flow environments. In particular, in the case of continuous flow, the law of increasing returns was satisfied in the effect of increasing travel speed and reducing travel time as the MPR of AV increases. The results of this study are expected to be used as a basic information for design plans for road reconstruction and space utilization after the commercialization of AV in the future.

• Journal of Korean Society of Transportation
• /
• v.24 no.3 s.89
• /
• pp.143-153
• /
• 2006

This paper annually estimates the economies of density, scale and scope with the data of cost and output of 27 leading air carriers to suggest the political findings and strategies of raising the cost efficiency of our air transport industry. The estimation results and their implications are as follows. First, KAL and Aha would reduce their cost if they could increase international route density. Second, KAL and AAR would reduce their cost if they could expand the network but save their cost more effectively if they could increase international route density rather than expand the network. Third, the minimum efficient scale that minimize average cost of two national flag carriers which operate by the present output ratio among domestic passenger, international passenger and freight appears to be larger than each present output level of KAL and AAR. Meanwhile, it appears that minimum efficient scale of small size low cost carriers which operate domestic-oriented route is much smaller than minimum efficient scale of national flag carriers. Finally, it appears that there exists the diseconomies of scope between domestic passenger and the other outputs, that is, international passenger and freight and therefore save their cost if freight output ratio is higher and domestic passenger output ratio is lower than the Present level.

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 2007.05a
• /
• pp.39-50
• /
• 2007

Sexing from bovine embryos fertilized in vitro implicates a possibility of the sex controlled cattle production. This study was carried out to produce the sex determined cattle through the embryonic sexing by fluorescence in situ hybridization (FISH) technique. FISH was achieved in in vitro fertilized bovine embryos using a bovine Y-specific DNA probe constructed from the btDYZ-1 sequence. Using this probe, a male-specific signal was detected on 100% of Y-chromosome bearing metaphase specimens. The analyzable rate of embryonic sexing by FISH technique was about 93% (365/393) regardless of embryonic stages. As tested single blastomere by FISH and then karyotype with their biopsied embryos, the accuracy of sex determination with FISH was 97.6%. We tried the embryo transfer with sex determined embryos on 15 cattle. Among them, the 5 cattle delivered calf with expected sex last year.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1972.03a
• /
• pp.5-6
• /
• 1972

Noise and air pollution, which accompany the development of industry and the increase of population, contribute to the deterioration of urban environment. The air pollution level of Seoul has gradually increased and the city residents are suffering from a high pollution of noise. If no measures were taken against pollution, the amount of emission of pollutant into air would be 36.7 thousand tons per year per square kilometer in 1975, three times more than that of 1970, and it would be the same level as that of United States in 1968. The main sources of air pollution in Seoul are the exhaust has from vehicles and the combustion of bunker-C oil for heating purpose. Thus, it is urgent that an exhaust gas cleaner should be instaled to every car and the fuel substituted by less sulfur-contained-oil to prevent the pollution. Transportation noise (vehicular noise and train noise) is the main component of urban noise problem. The average noise level in downtown area is about 75㏈ with maximum of 85㏈ and the vehicular homing was checked 100㏈ up and down. Therefore, the reduction of the number of bus-stop the strict regulation of homing in downtown area and a better maintenance of car should be an effective measures against noise pollution in urban areas. Within the distance of 200 metres from railroad, the train noise exceeds the limit specified by the pollution control law in Korea. Especially, the level of noise and steam-whistle of train as measured by the ISO evaluation can adversely affect the community activities of residents. To prevent environmental destruction, many developed countries have taken more positive action against worsening pollution and such an action is now urgently required in this country.