• Journal of Korean Society of Transportation
• /
• v.16 no.3
• /
• pp.101-111
• /
• 1998

현재 고속도로 교통관리시스템(FTMS)에 사용되고 있는 차량 검지기는 주로 루프 식 검지기가 이용되고 있으나, 유지관리에 많은 어려움이 있다. 본 연구에서는 이러한 문제 점을 갖고 있는 루프 검지기를 대체하기 위한 대체 검지기를 개발하는데 그 목적이 있다. 자기 검지기 신뢰도 평가는 현장 실험으로 이루어지며 비디오 촬영 및 루프 검지기, test car를 이용하여 교통량·속도·점유율의 기준자료를 마련하고 자기 검지기 자료와 비교·분석 및 통계적 검정을 실시하였다. 1차 실험과 2차 실험의 결과, 교통량과 속도는 실측자료와 유사했으나 점유율은 실측치와 다소 차이가 발생함을 보였다. 향후 점유율에 대한 보정이 이루어진다면 현재 사용중인 루프 검지기를 대체할 수 있을 것으로 기대된다.

• Proceedings of the KOR-KST Conference
• /
• 2007.05a
• /
• pp.610-619
• /
• 2007

• Journal of Environmental Policy
• /
• v.14 no.3
• /
• pp.3-19
• /
• 2015

In this paper, we reviewed the method of replacing the number of registered vehicles with the number of trips to more realistically calculate vehicle emissions. Using the Korea Transport Data Base (KTDB) in replacing the number of registered vehicles with adjusted number of registered vehicle by specific vehicle type in the metropolitan area, the results by region showed that Seoul had the widest rate of error and that, among vehicles, trucks had the widest rate of error. Also, the absolute value of deviation of registered vehicles and adjusted number of registered vehicle influenced by the calculation of the quantity of vehicle emissions showed that out of the metropolitan regional government all trucks showed the widest deviation. The results of calculating the quantity of vehicle emissions showed an average of 9% difference between the emissions based on the number of registered vehicles and the emissions based on adjusted number of registered vehicle.

• Journal of Korean Society of Transportation
• /
• v.33 no.5
• /
• pp.449-460
• /
• 2015

The reliability of air quality evaluation results for green transportation could be improved by applying correct emission factors. Unlike previous studies, which estimated emission factors that focused on vehicles in laboratory experiments, this study investigates emission factors according to road types and time using real driving data. The real driving data was collected using a Portable Activity Monitoring System (PAMS) according to road types and time, which it compared and analyzed fuel consumption from collected data. The result of the study shows that fuel consumption on national highway is 17.33% higher than the fuel consumption on expressway. In addition, the average fuel consumption of peak time is 4.7% higher than that of non-peak time for 22.5km/h. The difference in fuel consumption for road types and time is verified using ANOCOVA and MANOVA. As a result, the hypothesis of this study - that fuel consumption differs according to road types and time, even if the travel speed is the same - has proved valid. It also suggests correction factor of emission factors by using the difference in fuel consumption. It is highly expected that this study can improve the reliability of emissions from mobile pollution sources.

• Journal of Korean Society of Transportation
• /
• v.20 no.5
• /
• pp.131-144
• /
• 2002

도로의 그룹핑(Grouping)이란 도고 계획, 설계, 관리, 조사 계획 및 정비 방침 등을 세우기 위해 유사한 성격의 도로 구간을 군집화하는 방법이다. 기존에 일반적으로 적용되고 있는 도로 그룹핑 방법은 그룹 수를 미리 지정함으써 분석가의 주관적 판단이 개입되었고, 그룹핑 변수 선정에 대한 근거가 부족하였다. 이에 본 연구에서는 기존에 일반적으로 적용되고 있는 도로 그룹핑 방법을 개선하여 새로운 방법론을 제시하였다. 또한 새로 제시된 방법론의 검증을 위해 도로 교통량 통계연보에서 제공하고 있는 일반국도의 2000년 294개 상시조사 지전의 교통량 자료를 이용하여 분석하였다. 연구 결과 기존의 월, 요일 변동계수만을 적용한 그룹핑 방법보다는 기타 교통지표(AADT, $\Sigma$K1000(K값의 상위 1000번 순위까지의 누적 값), 중차량 비율, 주야율)를 동시에 적용할 때 좀 더 효율적이면서 세부적으로 분류됨을 알 수 있었다. 또한 기타 교통지표론 적당한 그룹핑 결과로는 5그룹의 국도 기능 분류가 가능함을 알 수 있었다. 그 결과 기존의 소재지역과 기능에 따른 국토의 구분을 지방 산업도로 그룹, 지역 간선도로 그룹, 대도시 주변형 도로 그룹, 중소도시 주변형 및 관광도로 그룹, 관광도로 그룹으로 분류할 수 있었다. 본 연구에서의 도로 그룹핑 결과에 각 지역특성을 추가하여 분석한다면 도로의 계획, 선계, 관리 등에 매우 유용한 자료로 활용되리라 예상한다. 또한 본 연구의 결과를 이용하면 좀 더 효율적으로 설계시간계수 선정, 전역 조사 지점의 AADT추정, 상시 교통량 조사 자료의 누락 데이터 보정 및 교통량 조사의 스케줄링에 많이 활용할 수 있을 것으로 기대된다.

• Proceedings of the Korea Contents Association Conference
• /
• 2004.11a
• /
• pp.501-504
• /
• 2004

Straight traffic signal information is understanded by roation traffic signal.Ten traffic rotation street flew system saturated without forseed quantaty of traffic vehicle and length oftraffic street.Optimul traffic signal forcasting is needed departmemtstore sale season. for solution of this problem, at least before 10 hour traffic quantity reported policy department.For traffic forcasting of traffic jamed building pushed vehicle, neural network method is adapted Single traffic network is more needed to through traffic signal compared of traffic network. traffic network system is first analysed for artificial traffic network system and networked traffic systen is constructed by ubiquatous.

• Journal of Korean Society of Transportation
• /
• v.31 no.3
• /
• pp.86-95
• /
• 2013

In this study, a model of compensation and amendment of forecasted travel demand was developed to calculate the range of values depends on the changes in the risk factors, selecting factors that might affect traffic demand changes among risk factors. Selected factors are as follows: influenced area population, the number of registrated vehicle per person, ratio of service industry workers, and city intervals. Then this model is applied to six routes of expressway and the calculated value were compensated with error rate being reflected on each quartile value with respect to influenced area population (200,000 people standards). Result from appling developed model to Cheongwon-Sangju expressway suggests that the model could compensate the error rate by more than 50%, which in turn validate the effectiveness of the model developed. Some limitations and future research agenda have also been identified.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.6
• /
• pp.32-48
• /
• 2023

Autonomous driving technology is shaping the future of personalized travel, encouraging personalized travel, and traffic impact could be influenced by individualized travel behavior during the transition of driving entity from human to machine. In order to evaluate traffic impact, it is necessary to estimate the total number of trips based on an understanding of individual travel characteristics. The Activity-based model(ABM), which allows for the reflection of individual travel characteristics, deals with all travel sequences of an individual. Understanding the relationship between travel and travel must be important for assessing traffic impact using ABM. However, the ABM has a limitation in the data hunger model. It is difficult to adjust in the actual demand forecasting. Therefore, we utilized a Tour-based model that can explain the relationship between travels based on household travel survey data instead. After that, vehicle registration and population data were used for correction. The result showed that, compared to the KTDB one, the traffic generation exhibited a 13% increase in total trips and approximately 9% reduction in working trips, valid within an acceptable margin of error. As a result, it can be used as a generation correction method based on Tour, which can reflect individual travel characteristics, prior to building an activity-based model to predict demand due to the introduction of autonomous vehicles in terms of road operation, which is the ultimate goal of this study.

• Proceedings of the KOR-KST Conference
• /
• 1995.05a
• /
• pp.165-169
• /
• 1995

다원화투자,공사화경영, 시재건립시장경제조건하,해결성시기출설시건설 자김긴결적유효도경. 이시정부제공토건부분건설자김,철로국여연선구토지절가인고, 용상술량항자본수익보정상업투자15 %적회보솔, 래흡인외상제공구치차량설비적투자, 합삼위일,성립항목법인실체,재정부적정책부지하,자주개발경영,사상해시남북궤도 교통건설조도최가적투자경영방식.

• Journal of Korean Society of Transportation
• /
• v.22 no.4 s.75
• /
• pp.43-56
• /
• 2004

The KHCM procedure is a micro level analysis at signalized intersections requiring a lot of input variables and complex computations. The research was to investigate the possibility of simplifying the analysis procedures by using the generalized or the combined variables that less influence on the adjusted traffic volume and through-car equivalents of left or right turns. It was also tried to make lane grouping into directional flow ratio(v/s) based on a field surveys. The maximum and minimum values of each variables were compared with each other through the KHCM analysis procedures in terms of control delay. The lane grouping and the synthetical influence of a simplified method was evaluated with the scenario built in prevailing maximum and minimum conditions. The study showed that the control delay was not significantly sensitive to the selected variables and the lane grouping and their synthetical influence as well.