• Journal of Energy Engineering
• /
• v.29 no.2
• /
• pp.1-9
• /
• 2020

In recent days, fuel cell has received attention from the world as an alternative power source to hydrocarbon used in automobile engines. With the industrial advances of fuel cell, There have been a lot of researches actively conducted to find a way of generating hydrogen. Among many hydrogen production methods, Solid Oxide Electrolysis Cell(SOEC) is not only a basic way but also environment-friendly method to produce hydrogen gas. Solid Oxide Electrolysis Cell has lower electrical energy demands and high thermal efficiency since it is possible to operate under high temperature and high pressure conditions. For these reasons, experimental researches as well as studies on numerical modeling for Solid Oxide Electrolysis Cell have been under way. However, studies on numerical modeling are relatively less enough than experimental accomplishments and have limited performance prediction, which mostly is considered as a result from inadequate effects of electrochemical properties by temperature and pressure. In this study, various experimental studies of commercial Membrane Electrode Assembly (MEA) composed of Ni-YSZ (40wt%, Ni-60 wt% YSZ)/8-YSZ (TOSOH, TZ8Y)/LSM (La_0.9Sr_0.1MnO₃) was utilized for improving effectiveness of SOEC model. After numerically analyzing effects of electrochemical properties according to operating temperature, causing the largest deviation between experiments and simulation are that Charge Transfer Coefficient (CTC), exchange current density, diffusion coefficient, electrical conductivity in SOEC. Analyzing temperature effect on parameter used in overpotential model is conducted for modeling of SOEC. cross-validation method is adopted for application of various MEA and evaluating feasibility of model. As a result, the study confirm that the numerical model of SOEC based on structured process of effectiveness evaluation makes performance prediction better.

• Journal of Bio-Environment Control
• /
• v.25 no.3
• /
• pp.193-199
• /
• 2016

The research discussed experimental results on slip resistance force of rafter-purlin connection of plastic greenhouse and suggested a test method for evaluating slip resistance performance of the connection. Slip resistance forces were measured by four kinds of constraint conditions for specimens, for example, fixing or rolling the end of specimen. According to tests, it is noticed that constraint condition is able to significantly affect the slip resistance force. From a post-hoc comparison result, slip resistance force of test under fixing ends condition was larger than those under the other three constraint conditions. But the slip resistance force results in the fixing ends condition had greater measure of dispersion and three times of standard deviation than those from other constraint conditions. Based on the results obtained, effect of constraint condition for specimen on the slip test should be studied to enhance reliability of evaluation test of the slip resistance performance.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.9
• /
• pp.71-80
• /
• 2007

This paper presents a new push-push VCO technique that extracts a second harmonic output signal from a capacitive commonnode in a negativegm oscillator topology. The generation of the $2^{nd}$ harmonics is accounted for by the nonlinear current-voltage characteristic of the emitter-base junction diode causing; 1) significant voltage clipping and 2) different rising and falling time during the switching operation of core transistors. Comparative investigations show the technique is more power efficient in the high-frequency region that a conventional push-push technique using an emitter common node. Prototype 12GHz and 17GHz MMIC VCO were realized in GaInP/GaAs HBT technology. They have shown nominal output power of -4.3dBm and -5dBm, phase noise of -108 dBc/Hz and -110.4 dBc/Hz at 1MHz offset, respectively. The phase noise results are also equivalent to a VCO figure-of-merit of -175.8 dBc/Hz and -184.3 dBc/Hz, while dissipate 25.68mW(10.7mA/2.4V) and 13.14mW(4.38mA/3.0V), respectively.

• Korean Journal of Optics and Photonics
• /
• v.9 no.2
• /
• pp.111-116
• /
• 1998

Thirteen InGaAs/InGaAsP separate-confinement heterostructure multiple quantum well lasers were designed such that the strain in the active layer from 0.9% compressive strain to 1.4% tensile, and their threshold current density was caluculated to see the effects of strain on the threshold current density. The well width was adjusted such that the bandgap of the quantum well is 1.55 ${\mu}{\textrm}{m}$, For the calculation of the band structure and transition matrix element needed for the gain calculation, a block diagonalized 8$\times$8 second-order $\to{k}.\to{p}$ Hamiltonian was used to incorporate the conduction band nonparabolicity and the valence band mixing. The threshold current density shows discontinuity at 0.4% tensile strain where the first heavy-hole subband and the first light-hole subband cross and at 0.5% tensile strain where the second conduction subband begins to exist. The threshold current density at room temperature has a maximum around these 0.4-0.5% tensile strains, and as strain varies in either direction it decreases first and then increases a little after a local minimum. This calculated trend is consistent with the other reported experimental results. We discussed the results of this calculation in comparison with other theoretical or experimental papers on the effect of strain.

• Journal of the Korean Geophysical Society
• /
• v.2 no.1
• /
• pp.27-38
• /
• 1999

The errors between track segments or at the cross-over points of shipborne gravity were successfully reduced by applying a cross-over error adjustment technique using satellite gravity. The integration of shipborne and satellite altimeter-implied free-air gravity anomalies after the cross-over error adjustment resulted in a high resolution gravity map which contains both short and long wavelength components. The successful adjustment of the cross-over errors in the shipborne gravity using the satellite gravity suggests that the shipborne gravity can be combined with the satellite anomalies characterized by a stable and long wavelength component. The resulting free-air anomaly map is evenly harmonized with both short and long wavelength anomalies. Thus the corrected anomaly map can be better used for the geological interpretation. Free-air anomalies with more than 140 mGal in total variations generally correspond to the seafloor topographic changes in their regional patterns. A series of gravity highs are aligned from the Korea Plateau to the Oki Island, which are interpreted to be caused by seamounts or volcanic topographies. The gravity minima along the western and southern shelf edge are associated not only with the local basement morphology and thick sediment fill at the continental margin, but also possibly with the crustal edge effect known for passive continental margins. Series of NE-trending linear anomalies are possibly caused by a swarm of volcanic intrusions followed the initial opening of the Ulleung Basin. The linear high anomalies in the Ulleung Plateau are terminated by the straightly NNW-trending anomalies with a sharp gradient in its western boundary which indicates a fault-line scarp. The opposite side adjoined with the fault-line scarp shows no correlation with the fault-line scarp in geometry indicating that the block might be horizontally slided from the north. A gravity high in contrast to the deepening in seafloor toward the northeastern central Ulleung Basin is probably responsible for the thin crust and shallow seated mantle. The gravity minima along the western and southern shelf edge are associated not only with the local basement morphology and thick sediment fill at the continental margin, but also possibly with the crustal edge effect known for passive continental margins. Series of NE-trending linear anomalies are possibly caused by a swarm of volcanic intrusions followed the initial opening of the Ulleung Basin. The linear high anomalies in the Ulleung Plateau are terminated by the straightly NNW-trending anomalies with a sharp gradient in its western boundary which indicates a fault-line scarp. The opposite side adjoined with the fault-line scarp shows no correlation with the fault-line scarp in geometry indicating that the block might be horizontally slided from the north. A gravity high in contrast to the deepening in seafloor toward the northeastern central Ulleung Basin is probably suggestive of a thin crust and shallow seated mantle.

• Journal of Animal Science and Technology
• /
• v.50 no.5
• /
• pp.621-632
• /
• 2008

Genetic polymorphisms was investigated at five single nucleotide polymorphisms(SNP) sites in four porcine genes(ADCYAP1R1, FABP3, MC4R, and MYL2) and analyzed their statistical association with growth traits in F2 reciprocal-crossbred population between Landrace and Jeju native black pig(JNP). All populations, JNP, Landrace and their F2 were polymorphic for all five SNP loci tested, however, the homozygote T/T of FABP3 g.-158T>C and the homozygote G/G of ADCYAP1R1 intron 2 337A>G were not found in JNP and Landrace, respectively. The genotypes of ADCYAP1R1 were significantly associated with body weights(BW) at 3 weeks and at 20 weeks(P<0.05), respectivley, those of FABP3 g.-135delT were associated with late average daily gain(LADG) (P<0.01), and those of FABP3 g.-158T>G were associated with body weights during late growth period such as, BW20 and LADG(P<0.01). Those of MC4R were also significantly associated with BW10 suggesting by the difference of early average daily gain(EADG) (P<0.05), and with LADG(P<0.01). The body length of F2 animals was affected by the genotypes of ADCYAP1R1, MC4R, and MYL2(P<0.05), respectively. Among these, MC4R A/A homozygotes showed over 3 cm longer in body length than those of other genotypes. As the useful basic information, these results suggested that SNP markers showing statistical association with growth traits and the results help to select the sires of JNP for improving the productivity in JNP-related crossbreeding system in pig industry and also to construct the molecular breeding system for breed improvement of JNP itself.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.12 no.1
• /
• pp.11-22
• /
• 2010

According to IPCC 4th Assessment Report, concentration of carbon dioxide has been increasing by 30% since Industrial Revolution. Most of IPCC $CO_2$ emission scenarios estimate that the concentration will reach up to double of its present level within 100-year if the current tendency continues. The global warming has resulted in the agro-climate change over the Korean Peninsula as well. Accordingly, it is necessary to understand the future agro-climate induced by the increase of greenhouse gases in terms of the agro-climatic indices in the Korean peninsula. In this study, the future climate is simulated by an atmosphere/ocean/land surface/sea ice coupled general circulation climate model, Pusan National University Coupled General Circulation Model(hereafter, PNU CGCM), and by a regional weather prediction model, Weather Research and Forecasting Model(hereafter, WRF) for the purpose of a dynamical downscaling. The changes of the vegetable period and the crop growth period, defined as the total number of days of a year exceeding daily mean temperature of 5 and 10, respectively, have been analyzed. Our results estimate that the beginning date of vegetable and crop growth periods get earlier by 3.7 and 17 days, respectively, in spring under the $CO_2$-doubled climate. In most of the Korean peninsula, the predicted frost days in spring decrease by 10 days. Climatic production index (CPI), which closely represent the productivity of rice, tends to increase in the double $CO_2$ climate. Thus, it is suggested that the future $CO_2$ doubled climate might be favorable for crops due to the decrease of frost days in spring, and increased temperature and insolation during the heading date as we expect from the increased CPI.

• The Korean Journal of Nuclear Medicine
• /
• v.34 no.1
• /
• pp.82-93
• /
• 2000

Purpose: We characterized the signals obtained from the components of a small gamma camera using Nal(Tl)-position sensitive photomultiplier tube (PSPMT) and optimized the parameters employed in the modules of the system. Materials and Methods: The small gamma camera system consists of a Nal(Tl) crystal ($60{\times}60{\times}6mm^3$) coupled with a Hamamatsu R3941 PSPMT, a resister chain circuit, preamplifiers, nuclear instrument modules (NIMs), an analog to digital converter and a personal computer for control and display. The PSPMT was read out using a resistive charge division circuit which multiplexes the 34 cross wire anode channels into 4 signals (X+, X-, Y+, Y -). Those signals were individually amplified by four preamplifiers and then, shaped and amplified by amplifiers. The signals were discriminated and digitized via triggering signal and used to localize the position of an event by applying the Anger logic. The gamma camera control and image display was performed by a program implemented using a graphic software. Results: The characteristics of signal and the parameters employed in each module of the system were presented. The intrinsic sensitivity of the system was approximately $8{\times}10^3$ counts/sec/${\mu}Ci$. The intrinsic energy resolution of the system was 18% FWHM at 140 keV. The spatial resolution obtained using a line-slit mask and $^{99m}Tc$ point source were, respectively, 2.2 and 2.3 mm FWHM in X and Y directions. Breast phantom containing $2{\sim}7mm$ diameter spheres was successfully imaged with a parallel hole collimator. The image displayed accurate size and activity distribution over the imaging field of view Conclusion: We proposed a simple method for development of a small gamma camera and presented the characteristics of the signals from the system and the optimized parameters used in the modules of the small gamma camera.

• Korean Journal of Food Science and Technology
• /
• v.43 no.5
• /
• pp.618-623
• /
• 2011

Escherichia coli O157:H7 has been considered as a significant food-borne pathogen since its role in causing hemorrhagic colitis and hemolytic uremic syndrome in humans was recognized. In this study, we developed an immunochromatography (ICG) assay for the detection of E. coli O157:H7. E. coli O157:H7 monoclonal antibody (EC MAb) and colloidal gold were conjugated and its specificity was determined by the ICG treated with EC MAb and antimouse IgG at test and control lines, respectively. The detection limit of the ICG was $1{\times}10^5$ CFU/mL, and no crossreactivity was observed to other E. coli strains and major food-borne pathogens. To determine the minimum enrichment time for the ICG, meats and sprouts were inoculated with $1{\times}10$ CFU/100 ${\mu}L$ of E. coli O157:H7. After enrichment time of 10 and 2 h for meats and sprouts, respectively, up to $1{\times}10$ CFU/100 ${\mu}L$ of E. coli O157:H7 could be detected by ICG.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.2
• /
• pp.57-66
• /
• 2010

In reviewing 'Dongkukesangkukjip(東國李相國集)' a selection of prose and poetry describing Toesikje, the house of Kee Heung-soo, a military official in the middle Goryeo Dynasty, the outcome of the study intended to infer garden scenery and landscape culture managed and possessed by high society at that time is outlined as follows. First, Kee Heung-soo, the owner of the house and Lee Kyu-bo, the author of Toesikje Palryeng(退食齋八詠) are thought to be those who first designated the 8 scenic points and recreated the concept of public enjoyment of into the concept of personal enjoyment in Korea. Second, the spatial configuration of the Toesikje garden is presumed to be in the Gee-Seung-Jeon-Gyul(introduction-development-turn-conclusion) style in which a fairyland is built to enjoy a free and peaceful life, while anticipating coming days and pursuing creation-prosperity-transcendence-return. Third, the viewpoint structure of the scenery Wongyeong(Toesikje), Donggyeong(Youngcheondong), Cheonggyeong(Cheokseojung), Myunggyeong(Dokrakwon), Jingyeong(Yeonmukdang), Sigyeong(Yeoneuiji), Yunggyeong(Nokgunheon), and Hyungyeong(Daehoseok) contains a symbolic universal vision of Palchejigyeongsek(the 8 scenic points) which incorporates Samwon(heaven, earth and water) and Obangwi(orientations), and the harmonization principle of the scenic points where the building and garden are harmonized. Fourth, Je, Dang, and Heon, Jeong(齋, 堂, 軒, 亭) are introduced to the garden, and Geehwayeecho, Jingeumgeesoo, Gasan and Goeseok(stone) were used in a variety of ways. Fifth, it was found that the management of Shinseongyeong and enjoyment of Yoosanggoksu events, with the study and seeking of perfect knowledge and discipline, wandering and rest led to a sublime appreciation of aesthetic beauty and divine glory. Sixth, a miniature garden was built to enjoy the view from above, together with the view in the distance, and a culture of secluded living, along with scenery expressing the heart's desire for Utopia was induced.