• The Journal of Engineering Research
• /
• v.1 no.1
• /
• pp.5-14
• /
• 1997

The purpose of thesis is to analyze the radiation characteristics of an offset gregorian antenna in order to design the satellite-loaded antenna. In order to compute the radiation pattern of the sub-reflector, the reflected wave is obtained by GO(Geometric Optics) at an arbitrary shaped sub-reflector. Then the total radiation EM wave is obtained by summing the diffracted fields obtained by UTD(Uniform Geometrical Theory of Diffraction) and the GO fields. In order to calculate the far field radiation pattern of the main reflector, the radiation integral equation is derived from the induced current density on reflector surface using PO(Physical Optics). The kernel is expanded in terms of Jacobi-Bessel series for increasing the computational efficiency, then the modified radiation integral is represented as the double integral equation independent of observation points. When the incident fields are assumed to be x-or y-polarized field, the characteristics of radiation patterns in the gregorian antenna is analyzed in case of the main reflector having the focal length of 62.4$\lambda$, diameter of 100$\lambda$, and offset height of 75$\lambda$, and the sub-reflector having the eccentricity of 0.501, the inter focal length og 32.8$\lambda$, the horn axis angle of $9^{\circ}$ and the half aperture angle of $15.89^{\circ}$. The cross-polarized level and side lobe level in the offset geogorian reflector are reduced by 30dB and 10dB, respectively, in comparison with those of the offset parabolic antenna.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.5
• /
• pp.853-859
• /
• 2007

This paper presents a microstrip patch array antenna having transmission feed and reception feed for satellite communication in the Ku band. In this paper, the element of the patch array antenna is a three-stacked structure consisting of one radiation patch and two parasitic patches for high gain and wide bandwidth characteristics. To obtain higher gain, the unit elements are expanded into a $1{\times}8$ may using a mixture of series and parallel feeds. The proposed antenna has horizontal polarization for the Rx band and vertical polarization for the Tx band. To verify the practicality of this antenna, we fabricated a three-stacked patch array antenna and measured its performance. The gain of the array antenna in the Rx and Tx bands exceeds 17 and 18 dBi, respectively. The impedance bandwidth is over 10 % in both bands. The cross-polarization level is below -25 dB, and the sidelobe level is below -9.4 dB.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1015-1022
• /
• 2023

In this paper, we propose DLP(Dual Linear Polarization) antenna with aperture coupled feeding structure for private network. The proposed antenna has general aperture coupled structure and design two port between top and bottom layer to obtain the enhanced isolation. Also, The size of each substrate(top and bottom layer) is 34.0 mm(W)×34.0 mm(L), which is designed on the FR-4 substrate which thickness (h) is 1.0 mm, and the dielectric constant is 4.4. Also, the size of patch antenna is 12.70 mm(W2)×14.60 mm(L3), and it is located on the top layer. The size of feeding line is 24.0 mm(W2)×1.6 mm(L3), and is located at the bottom layer Also, rectangular slot is located on the ground plane between top layer and bottom layer. From the fabrication and measurement results, bandwidths of 300 MHz (4.52 to 4.82 GHz) for feeding port 1, and 170 MHz (4.65 to 4.82 GHz) for feeding port 2 are obtained on the basis of -10 dB return loss and transmission coefficient S21 is got under the -30 dB. Also, cross polarization isolation between each feeding port obtained

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.7
• /
• pp.3450-3453
• /
• 2013

We implemented double-negative metamaterials using cross-polarized split-ring resonators in a microstripline. The split-ring resonators comprised quad ring structures and were connected with the microstripline in series. Four different structures, with the shorted rings in varying locations, were fabricated to demonstrate reconfigurable band-pass characteristics. The effective permittivities and permeabilities were extracted using the Ziolkowski method. Excellent agreement between the developed circuit model and the measurement was observed up to 10 GHz.

• Journal of Broadcast Engineering
• /
• v.16 no.3
• /
• pp.483-489
• /
• 2011

In this paper, we propose a new antenna, which has wide bandwidth, good radiation patterns, and high-gain characteristics. We analysis the antenna using FDTD(Finite Difference Time Domain) method. And the antenna parameters are optimized to get maximum bandwidth. From the measured results, the bandwidth of the antenna is 0.839 octave, for the S11${\leq}$-10 dB. And the measured cross polarization level of the proposed antenna is less than -25 dB at the center frequency. Experimental data of the return loss and the radiation pattern of the proposed antenna are also presented, and the experimental bandwidth characteristics are relatively in good agreement with the FDTD results. The proposed antenna can be applied to MIMO, LAN, biomedical instruments, broadcasting-network system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.79-80
• /
• 2016

In this paper, we considered a design method for a microstrip patch antenna fed through two radiating edges by two feeding microstrip lines. Two feedlines are made to have a phase difference of 180 degree with each other in order to reduce cross-polarization level radiated from the antenna. The operation principle and design procedure for the considered antenna are explained using equivalent circuits. In order to check the validity of this study, the results for reflection coefficients of the antenna obtained by the proposed equivalent circuit method and the simulation using commercial antenna design tool are compared with each other.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.2
• /
• pp.251-258
• /
• 2023

In this paper, we propose DLP(Dual Linear Polarization) stack antenna for private network. The proposed antenna has general stack structure and design airgap between two substrate to obtain the maximum gain. Also, to improve cross polarization isolation, two feeding port is designed to separate for each substrate. The size of each patch antenna is 17.80 mm(W1)×16.70 mm(L1) for lower patch and 18.56 mm(W2)×18.73 mm(L2) for upper patch, which is designed on the FR-4 substrate which thickness (h) is 1.6 mm, and the dielectric constant is 4.3, and which is 40.0 mm(W)×40.0 mm(L) for total size of substrate. From the fabrication and measurement results, bandwidths of 100 MHz (4.74 to 4.84 GHz) for feeding port 1, and 150 MHz (4.67 to 4.82 GHz) for feeding port 2 are obtained on the basis of -10 dB return loss and transmission coefficient S21 is got under the -20 dB. Also, cross polarization isolation between each feeding port obtained

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.5 s.108
• /
• pp.461-475
• /
• 2006

In this paper, it is described about the tri-band mobile antenna system design to provide broadband multimedia and direct broadcasting services using goo-stationary Koreasat 3, simultaneously operated in Ka/K/Ku band. The radiating part of the antenna system with a fan beam characteristic in the elevation plane is composed of the quasi-offset dual shaped reflector and the tri-band feeder. The tri-band feeder is also composed of the Ka/K dual band feeder with the protruding dielectric rod, the circular polarizer, the ortho-mode transducer and the circular-polarized Ku band feed array. Especially, the Ka/K dual band circular polarizer was realized firstly using the comb-type structure. For fast satellite-tracking on the movement, the Ku band feed array has the structure of the $2{\times}2$ active phased array which can make electrical beams. And, the circular-polarized characteristic in the feed array was improved by $90^{\circ}$ rotating arrangement of four radiating elements polarized circularly by a $90^{\circ}$ hybrid coupler, respectively. Four beam forming channels to make electrical beams at Ku band are divided into the main beam channel and the tracking beam channel in the output, and noise temperature characteristics of each channel were analyzed on the basis of the contributions of internal sub_units. From the fabricated antenna system, the output power at $P_{1dBc}$ of Ka_Tx channel was measured more than 34.1 dBm and the measured noise figures of K/Ku_Rx channels were less than 2.4 dB and 1.5 dB, respectively, over the operating band. The radiation patterns with co- and cross-polarization in the tri-band were measured using a near-field measurement in the anechoic chamber. Especially, Ku radiation patterns were measured after correcting each initial phase of active channels with partial radiation patterns obtained from the independent excitation of each channel. The antenna gains measured in Ka/K/Ku band of the antenna system were more than 39.6 dBi, 37.5 dBi, 29.6 dBi, respectively. And, the antenna system showed good system performances such as Ka_Tx EIRP more than 43.7 dBW and K/Ku_Rx G/T more than 13.2 dB/K and 7.12 dB/K, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.11
• /
• pp.1090-1099
• /
• 2004

In this paper a novel design of equilateral-triangular microstrip antenna using PIN diode fur switching the resonant frequency is presented and experimentally studied. The proposed antenna has changed the resonant frequency by length of spur-lines on the patch, and PIN diodes are utilized to switch the spur-line on and off. The shape of the spur-line is changed according to the on and off states of PIN diode and the equilateral triangular microstrip antenna has different resonant frequencies in accordance with them. The resonant frequency is 1.22 GHz with off states since the surface currents flow the periphery of T shape spur-lines, while the resonant frequency is 1.82 GHz with on states since the surface currents are little effect with the conventional equilateral triangular microstrip antenna. The radiation pattern of the proposed antenna has a good linear polarization with the cross polarization of -20 dB both with on and off states.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.4
• /
• pp.357-365
• /
• 2013

The 4 by 4 series slot sub-array antenna is proposed using substrate integrated waveguide(SIW) technology for 35 GHz of Ka band application. The proposed antenna is realized with multi-layered structure for compact size and easy integration features. 4 by 4 radiating slots are arrayed on top PCB with equal spacing and the feeding SIWs are arranged on middle and bottom PCBs for uniform power distribution. The multi-layered antenna is realized using RT/Duroid 5880 that has dielectric constant of 2.2 and the total antenna size is $750.76mm^2$. The individual parts such as radiators and feeding networks are simulated using full-wave simulator CST MWS. Furthermore, the total sub-array antenna also fabricated and measured the electrical performances such as impedance bandwidth under the criteria of -10 dB(490 MHz), maximum gain(18.02 dBi), sidelobe level(SLL)(-11.0 dB), and cross polarization discrimination (XPD)(-20.16 dB).