• Economic and Environmental Geology
• /
• v.46 no.2
• /
• pp.165-178
• /
• 2013

This study is for the genetic differences of two closed asbestos mines from Jeongjeon and Ocheon areas in Boryoung, Chungnam. They are mined asbestos for past several decades. Host rocks are serpentinites for Jeongjeon mine and dolomites for Ocheon mine. Asbestos samples and their host rocks are collected from the field trips and examined with microscopes and FESEM, and analysed with XRD and EDX to confirm for the type and/or compositions of the minerals. The asbestos occur as layers, cracks and fractures assummed as a pathway of the hydrothermal water, but show different characteristics. The serpentinites from the Jeongjeon mine contain chrysotile, tremolite and actinolite asbestos. Non-asbestos minerals including tremolite and actinolite were also found. The chrysotiles occur as a cross fiber or slip fiber at veins and along cracks of several mm to cm thickness. Tremolite and actinolite asbestos occur along cracks and fractures of several cm to ten cm thickness. It suggests that the asbestos from Jeongjeon area were formed by the reactions between serpentinite and hydrothermal water. The dolomites of the Ocheon mine only contain tremolite and actinolite asbestos. The asbestos occur along layers, cracks and fractures, suggestive of asbestos from Ocheon area formed by the reactions between dolomite and hydrothermal waters influxed along layers, cracks and fractures. Overall results suggest that two asbestos mines showing different host rocks are located in a Boryoung area. They show a different type of asbestos minerals, reflecting variety of petrogeneses.

• Analytical Science and Technology
• /
• v.29 no.6
• /
• pp.261-268
• /
• 2016

TXRF is a powerful technique for the soil sample analysis due to its ability to conduct quantitative analysis of powder sample without complicated pre-treatment processes. The conventional internal standard method used for this technique suffers from relatively low accuracy because of varying matrix effects of soil. In order to improve the accuracy, external standard method was applied to analyze two types of soil samples; acid-dissolutionized soil solution and detergent-suspended soil powder. Individual ICP-AES/MS grade standards were mixed, diluted and measured to create standard curves, but applying these curves for analyzing the soil solution sample did not make any improvement in comparison with the internal standard method. On the other hand, standard curves were created with using standard soil powders for the analysis of soil powder samples, and we found that this method increased the accuracy significantly relative to the internal standard method. Especially, Al, Fe, K, Ca, Ti, Ba, Mn, Sr, Rb, Cu was measured with relatively high accuracy (relative error = ${\pm}20%$).

• The Journal of Engineering Geology
• /
• v.17 no.3
• /
• pp.483-494
• /
• 2007

The properties of fracture system on road-cut slopes along the Busan-Ulsan express way under construction are investigated and analyzed. Fracture spacing distributions show log-normal form with extension fractures and negative exponential form with shear fractures. Straight line segments in log-log plots of cumulative fracture length indicate a power-law scaling with exponents of -1.13 in site 1, -1.01 in site 2 and -1.52 in site 3. It is likely that the stability and strength of rock mass are the lowest in site 1 as judged from the analyses of spacing, density and inter-section of fractures in three sites. In contrast, the highest efficiency of the fracture network for conducting fluid flow is seen in site 3 where the largest cluster occupies 73% through the window map. Based on the field survey data, this study modified weighting values of the RMR system using a multiple regression analysis method. The analysis result suggests a modified weighting values of the RMR parameters as follows; 18 for the intact strength of rock; 61 for RQD; 2 for spacing of discontinuities; 2 for the condition of discontinuities; and 17 for ground water.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.7
• /
• pp.39-50
• /
• 2013

Crib wall is one of the segmental grid retaining walls using headers and stretchers to establish the framework of the wall. In this method, grids formed by the intersection of headers and stretchers are generally filled with the gravel to maintain the weight of the wall. Therefore, the construction can be carried out with higher speed and much economically when compared with the concrete retaining wall. Furthermore, it has high drain capacity, and environmentally friendly aspects also have been pointed out because the possibility of the planting at the front of the wall. However, in the wooden crib wall method, the relative movement between the individual headers and stretchers was generally recognized, and stress redistribution in the gravel filling was also observed when subjected to the external loading and self-weight of filling. In this study, it was analyzed fracture types and causes of wooden crib wall through detailed investigation and analysis of a large crib wall construction site. As a results, it occurred the damage in the members of 5.7% in a total of 2,315 locations and the damage of header occurred in the members of a header 80.2%. The 65.7% of the damaged header are concentrated in the lower part of crib wall. Therefore, it was analyzed the differences of fracture types and causes of wooden crib wall depending on the installation position and the kinds of members. It is considered basically the members of various forms of distortion and the grain affecting.

• Korean Chemical Engineering Research
• /
• v.48 no.6
• /
• pp.717-724
• /
• 2010

The flash point is one of the most important physical properties used to determine the potential for fire and explosion hazards of flammable liquids. Despite the needs of the experimental flash point data for the design and construction of chemical plants, there is often a significant gap between the demands for the data and their availability. This study have built and compared two models of partial least squares(PLS) and support vector machine(SVM) to predict the experimental flash points of 893 organic compounds out of DIPPR 801. As the independent variables of the models, 65 functional groups were chosen based on the group contribution method that was oriented from the assumption that each fragment of a molecule contributes a certain amount to the value of its physical property, and the logarithm of molecular weight was added. The prediction errors calculated from cross-validation were employed to determine the optimal parameters of two models. And, an optimization technique should be used to get three parameters of SVM model. This work adopted particle swarm optimization that is one of heuristic optimization methods. As the selection of training data can affect the prediction performance, 100 data sets of randomly selected data were generated and tested. The PLS and SVM results of the average absolute errors for the whole data range from 13.86 K to 14.55 K and 7.44 K to 10.26 K, respectively, indicating that the predictive ability of the SVM is much superior than PLS.

• Journal of Energy Engineering
• /
• v.29 no.2
• /
• pp.1-9
• /
• 2020

In recent days, fuel cell has received attention from the world as an alternative power source to hydrocarbon used in automobile engines. With the industrial advances of fuel cell, There have been a lot of researches actively conducted to find a way of generating hydrogen. Among many hydrogen production methods, Solid Oxide Electrolysis Cell(SOEC) is not only a basic way but also environment-friendly method to produce hydrogen gas. Solid Oxide Electrolysis Cell has lower electrical energy demands and high thermal efficiency since it is possible to operate under high temperature and high pressure conditions. For these reasons, experimental researches as well as studies on numerical modeling for Solid Oxide Electrolysis Cell have been under way. However, studies on numerical modeling are relatively less enough than experimental accomplishments and have limited performance prediction, which mostly is considered as a result from inadequate effects of electrochemical properties by temperature and pressure. In this study, various experimental studies of commercial Membrane Electrode Assembly (MEA) composed of Ni-YSZ (40wt%, Ni-60 wt% YSZ)/8-YSZ (TOSOH, TZ8Y)/LSM (La_0.9Sr_0.1MnO₃) was utilized for improving effectiveness of SOEC model. After numerically analyzing effects of electrochemical properties according to operating temperature, causing the largest deviation between experiments and simulation are that Charge Transfer Coefficient (CTC), exchange current density, diffusion coefficient, electrical conductivity in SOEC. Analyzing temperature effect on parameter used in overpotential model is conducted for modeling of SOEC. cross-validation method is adopted for application of various MEA and evaluating feasibility of model. As a result, the study confirm that the numerical model of SOEC based on structured process of effectiveness evaluation makes performance prediction better.

• The Journal of the Petrological Society of Korea
• /
• v.23 no.4
• /
• pp.311-324
• /
• 2014

The Hongjeom formation of the Pyeongan Supergroup in the Munkyeong coalfield mainly consists of metapsammite and metapelites. Metampelites occur as slate preserving chloritoid+chlorite+muscovite and andalusite+biotite+chlorite+muscovite mineral assemblages. Chloritoid and andalusite occur as porphyroblast, and the matrix composed of fine-grained micas. Metamorphic P-T conditions for these mineral assemblages are $510-520^{\circ}C$ and 3.0-3.5kbar based on P-T pseudosection in $MnO-K_2O-FeO-MgO-Al_2O_3-SiO_2-H_2O(MnKFMASH)$ system and isopleth intersections of Fe/(Fe+Mg) ratios in chloritoid and chlorite. The medium temperature and low pressure metamorphism resulted from a higher geothermal gradient ($40-45^{\circ}C/km$) condition than that of burial metamorphism. The youngest (SHRIMP U-Pb age; ca. 327-310 Ma) detrital zircon grains from the Hongjeom formation display oscillatory zoning and relatively high Th/U ratio (0.60-1.12). Based on the previous sedimentary, paleontological, and geochronological studies in the Taebaeksan basin together with results of this study, we suggest that (1) initial deposition of the Hongjeom formation was contemporaneous with a magmatic activity in the provenance, (2) the Pyeongan Supergroup was deposited in an arc-related basin at an active continental margin during the Carboniferous to Permain, and (3) magmatic activities occurred repetitively in relatively short interval in the active continental margin had continuously supplied sediments to the basin.

• Korean Journal of Plant Resources
• /
• v.20 no.4
• /
• pp.336-341
• /
• 2007

This study was carried out to investigate geographic variation in needle characteristics of Pinus densiflora, one of the most economically important tree species in Korea. Needles were collected from 35 natural populations and their morphological and anatomical characteristics were studied. ANOVA showed statistically significant differences among populations as well as among individuals within populations in needle length, needle width, number of stomata row, density of stomata in $0.25mm^{2}$, number of serrations in 0.5mm, and number of resin ducts. In all these traits, variance components among individuals within populations were larger than those among populations. The density of stomata in $0.25mm^{2}$ increased as the latitudes and elevations of the populations increased, while the number of serrations in 0.5mm decreased as the decrease of latitudes and elevations. The number of resin ducts was higher in inland populations than in coastal populations. The resin duct index appeared to be higher in western populations than in eastern populations. Cluster analysis based on morphological characteristics divided populations into three groups. The third group was composed of populations selected from the Taebaek mountains. The number of serrations in 0.5mm of this group was lower than that of other two groups, while the density of stomata in $0.25mm^{2}$ was higher.

• Journal of Music and Human Behavior
• /
• v.9 no.2
• /
• pp.53-67
• /
• 2012

Improvisational music therapy is known to promote social engagement in children with autism. This study investigated salient features that characterize the engagement of the child with autism and the therapist in improvisational music therapy. Through video analysis of the children's behavior, this study sets out to investigate what engages children with autism into mutual play with the therapist in improvisational music therapy by measuring the shared musical elements between the child and the therapist during musical synchronicity episodes and the children's choice of instruments. A repeated measures, a crossover design was employed in two different conditions (n = 10). Children were randomly assigned into two groups; group 1 participated music therapy first, followed by play therapy second. Group 2 followed the reverse order. Specific target behaviors were analyzed in the selected sessions 1, 4, 8 and 12. As expected, improvisational music therapy produced markedly more and longer events of musical synchronicity in children with autism than the play sessions with toys (p < .001). Rhythm and dynamic appeared to be the two most salient elements during musical synchronicity events between the child and the therapist. Observational findings confirmed that horns and whistles were the most frequently selected instruments in music therapy, whereas a dollhouse set was in play therapy by children with autism. The clinical implications and the details of these findings are discussed further.

• Microbiology and Biotechnology Letters
• /
• v.26 no.3
• /
• pp.238-243
• /
• 1998

For simple and rapid detection of Pseudomonas tolaasii (PT), a bacterial brown blotch pathogen of oyster mushroom, enzyme-linked immunosorbent assays (ELISA) were developed. To produce specific antibody, PT ($5{\times}10^7$ cfu) and Freund's adjuvant were subcutaneously immunized into rabbits several times. By using the antiserum showing the highest titer, we established noncompetitive and competitive ELISA's. Standard curves of the ELISA's showed that the detection limits were $2{\times}10^2$cfu/ml and $3{\times}10^2$cfu/ml, respectively When investigated by noncompetitive ELISA, cross reactivities of the anti-PT antibodies against P. agarici, P. reactans, and other fluorescent Pseudomonas spp. were very low (<1/10$^3$), but those against P. solanacearum, Erwinia chrysanthemi, Streptococcus mutans, Xanthomonas citri, and a fungus Fusarium oxysporum were almost none. However, when investigated by competitive ELISA, the reactivities against any other strains except PT were almost none. When the ELISA's were applied to 18 strains derived from mushrooms in order to identify PT, only 11 strains showing both pathogenicity and white line reactivity were obviously positive. These results showed that the ELISA's could be convenient tools to detect PT in accordance with existing methods.