• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.11a
• /
• pp.1455-1456
• /
• 2013

최근 스마트 이동단말에 장착된 영상 센서를 통해 획득한 영상에서 실시간으로 사용자의 눈을 인식하거나 시선을 추적하여 콘텐츠 제어, 행태 분석 등을 수행하는 기술에 대한 필요성이 증가하고 있다. 기존의 영상 분석 기반 시선 추적 기술은 고가의 시선 추적기를 기반으로 하며, 추적한 시선 좌표를 통해 실제 응시객체를 분석하는 사후 작업이 필요하다. 이에, 본 논문에서는 OpenCV를 기반으로 스마트 이동단말의 전면에 장착된 영상 센서에서 사용자의 눈을 인식하고, 시선을 추적한 후, 이를 실시간으로 시선 좌표와 화면의 콘텐츠 내 객체 영역을 매칭함으로써, 응시객체를 분석하는 스마트 이동단말 기반 시선 추적기를 설계하였다. 본 논문의 시선 추적기는 시선 추적을 수행하기 위해, 사용자에게 5개의 화면 교정점을 제공하고 응시하도록 하여 시선 추적 범위를 측정한다. 또한, 스마트 이동단말에 내장된 자이로스코프 센서를 통해 기울기가 변경될 시, 이를 반영하여 시선 교정을 수행하도록 설계하였다.

• Journal of agricultural medicine and community health
• /
• v.42 no.2
• /
• pp.69-78
• /
• 2017

Objectives: This study investigated whether the impacts of orthodontic treatment of malocclusion on oral health-related quality of life and happiness are positive with middle and high school students Methods: Subjects were 157 orthodontic patients and 83 non-orthodontic in malocclusion patients. Questionnaires were collected with the self-administered method, and consisted of the general characteristics, self-esteem, social support appraisal scale(friends, family, teacher), Oral Impact on Daily Performance (OIDP) and oxford happiness questionnaire (OHQ). Results: A physical factor was lower in the orthodontic treatment group ($5.8{\pm}2.48$) than in the non-orthodontic treatment group ($7.7{\pm}2.10$)(p<0.001), and OIDP was lower in the orthodontic treatment group ($7.0{\pm}1.79$) than in the non-orthodontic treatment group ($7.8{\pm}1.80$)(p=0.002). A feeling of happiness was higher in the orthodontic treatment group($4.6{\pm}0.81$) than in the orthodontic treatment group ($4.3{\pm}0.89$) (p=0.009). As results of multiple regression analysis, OIDP was affected of orthodontic treatment(${\beta}=-0.0222$, p=0.001) and OHP was affected of orthodontic treatment(${\beta}=0.087$, p=0.030) and OIDP(${\beta}=0.116$, p=0.003). Conclusions: Orthodontic treatment of malocclusion may positively affects happiness in teenager. Support policy for orthodontic treatment of malocclusion is necessary for adolescents.

• Journal of dental hygiene science
• /
• v.11 no.6
• /
• pp.489-495
• /
• 2011

The present study was designed to grasp the oral health behavior practice levels and PHP index and gingival index of orthodontic patients' orthodontic related characteristics. A survey and oral examination were conducted for 206 orthodontic patients with fixed appliances. The collected data were analyzed with a t-test, one way ANOVA and stepwise multiple regression. Women were higher than men of the toothbrushing parts(p<0.05), toothbrushing frequency(p=0.001) and use of more oral hygiene products(p<0.01). As for the use of more oral hygiene products practice, it has higher when experience of more education(p<0.05), toothbrushing method practice difference when it comes to age(p<0.05). As for toothbrushing times, difference was purpose of orthodontics(p<0.05) and period of orthodontics(p<0.05) and orthodontics equipment(p<0.05). As for orthodontic equipment, conventional-ligating bracket high score compared to the self-ligating bracket with Buccal PHP index(p<0.001) and gingival index(p<0.05). The factors with lowest possible Buccal PHP index; when age is greater(p<0.05), toothbrushing method practice is higher(p<0.001) and when patients have self-ligating bracket(p<0.001). Education for the orthodontic patients on the oral health behavior practice should be carried out structurally to the group of patients who are 17 years old or younger, to the group with conventional-ligating bracket and to the men. Moreover, it is critical to ensure that there won't be oral health problem during on orthodontic period.

• Journal of Digital Convergence
• /
• v.17 no.9
• /
• pp.185-192
• /
• 2019

The introduction of smart technology provides accuracy, safety, and efficiency to both physicians and patients. Although interest in a clear aligner is increasing among users worldwide, the current clear aligner requires a visit to the hospital every one or two weeks for replacement, which is a very cumbersome process. There is also confusion among dentists and patients because about 40 to 80 devices are made, and calibration is done based on the order and duration of the clear aligner. Therefore, this study designed and developed a clear aligner management system so that communication between the patient and dentist can be smoothly performed by inserting the QR code into the transparent correction device. As a result, the size of the QR code was recognized as $6{\ast}6mm^2$ which can be used in the oral and the recognition distance was 100% within 12 cm. Since the dentist can remotely manage the patient with the proposed system and improve the correction effect, it is possible to manage patients abroad, as well as domestically.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.4
• /
• pp.121-126
• /
• 2008

Purpose: To study the minimum diopter of spherical lens with normal binocular function in induced anisometropia by over-correction or under-correction in single eye. Methods: Stereoacuity of subjects without ophthalmic disease history in their twenties was measured by using Titmus-fly stereotest at 40 cm after overcorrection or under-correction in non-dominant eye or dominant eye, respectively. Results: In induced anisometropia, the stereoacuity decreased with increase of the power of added spherical lens in either nondominant eye or dominant eye. And the first reduction of stereoacuity was more prominent with the addition of (+) spherical lens than (-) spherical lens. In addition, there was more strikingly decrement of stereoacuity with addition of spherical lens to dominant eye than non-dominant eye. Conclusions: In induced anisometropia, the most outstanding reduction of stereoacuity was obtained with increment of the power of added (+) spherical lens in case of non-dominant eye with full correction and dominant eye with addition of spherical lens.

• Journal of the Korean Vacuum Society
• /
• v.12 no.3
• /
• pp.157-161
• /
• 2003

Nowadays there are increasing demands for more accurate measurement of atmospheric pressure according to the development of environmental industries. One of the most important pressure gauges for satisfying these demands is a quartz resonance barometer. In order to calibrate such an accurate barometer, laser/ultrasonic mercury manometers have been used. However, complexity and cost of mercury manometers made it out of use gradually. As a substitute, a gas-operated pressure balance is used for calibration of precise barometers. In such a case, commercially available pressure balances cannot be entirely suitable because consequent exposure of the piston, cylinder and masses to the atmosphere causes the problem of contamination. In this paper a device for changing the masses in situ without breaking the vacuum is described. This device made it possible to add or remove weights in the absolute mode, thereby greatly reducing the time between observations. At the same time, we investigated the characteristics of a commercial precise barometer using this new apparatus.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.3
• /
• pp.180-190
• /
• 2019

Patients who have a moderate periodontitis with pathologic tooth migration of maxillary incisors, it is necessary not only periodontal treatment for reduce periodontal inflammation, but also orthodontic treatment to teeth repositioning. For orthodontic treatment, it is necessary to apply less force and careful considerations of the center of resistance of the tooth and optimal force of tooth movement. At this time, the segmental arch applied only to the target teeth, is more effective and predictable, because applied force and direction can be controlled. In addition, to design the orthodontic appliance that can prevent the unwanted tooth movement that used as an anchorage is important. In recent years, various types of skeletal anchorage system have been used for preventing loss of the anchorage. We reported the patient who had extruded maxillary central incisor due to pathologic tooth migration, treated by a successful periodontal-orthodontic multidisciplinary treatment using an orthodontic appliance designed to apply less traumatic force and reduce an anchorage loss.

• The korean journal of orthodontics
• /
• v.30 no.4 s.81
• /
• pp.377-386
• /
• 2000

At the finishing stage, the use of asymmetric elastics to treat mild skeletal and dental midline discrepancies often creates several side effects such as canted occlusal plane, tipped incisors and unesthetic results. This report presents the clinical cases with midline discrepancies, following a differential diagnosis, optimal mechanics, and considerations in treatment. Differential diagnosis and treatment mechanics with three-piece basal archwire can obtain predictable midline correction with minimal side effects.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.1188-1191
• /
• 2017

Thrust is one of the crucial performance parameter of a combustion chamber in the combustion chamber development test. So it is very important to measure an accurate thrust. Thrust calibration test was performed to identify the system characteristics, resistance and linearity of a vertical thrust measurement system(TMS) for accurate thrust measurement. It has been found 6.9% ~ 8.6% errors between the measured thrust by TMS calibration equations and theoretical thrust. It has been confirmed that the TMS calibration is necessary to be performed with the propellant lines connected to the combustion chamber for accurate thrust measurement.

• The korean journal of orthodontics
• /
• v.30 no.6 s.83
• /
• pp.677-685
• /
• 2000

Anchorage plays an important role in orthodontic treatment. Because of limited anchorage Potential and acceptance problems of intra- or extraoral anchorage aids, endosseous implants have been suggested and used. However, clinicians have hesitated to use endosseous implants as orthodontic anchorage because of limited implantation space, high cost, and long waiting period for osseointegration. Titanium miniscrews and microscrews were introduced as orthodontic anchorage due to their many advantages such as ease of insertion and removal, low cost, immediate loading, and their ability to be placed in any area of the alveolar bone. In this study, a skeletal Class II Patient was treated with sliding mechanics using M.I.A.(micro-implant anchorage). The maxillary micro-implants provide anchorage for retraction of the upper anterior teeth. The mandibular micro-implants induced uprighting and intrusion of the lower molars. The upward and forward movement of the chin followed. This resulted in an increase of the SNB angle, and a decrease of the ANB angle. The micro-implants remained firm and stable throughout treatment. This new approach to the treatment of skeletal Class II malocclusion has the following characteristics . Independent of Patient cooperation. . Shorter treatment time due to the simultaneous retraction of the six anterior teeth . Early change of facial Profile motivating greater cooperation from patients These results indicate that the M.I.A. can be used as anchorage for orthodontic treatment. The use of M.I.A. with sliding mechanics in the treatment of skeletal Class II malocclusion increases the treatment simplicity and efficiency.