• Title/Summary/Keyword: 교정치료진단

Search Result 343, Processing Time 0.029 seconds

Orthodontic Treatment Combined with Occlusal Splint in Regressive Condyle Resorption Patients (퇴행성 과두 흡수 환자에서 교합 안정장치 병용 교정치료)

  • Tae, Ki-Chul
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.23 no.1
    • /
    • pp.1-10
    • /
    • 2007
  • 악관절 잡음과 동통,과두 흡수를 동반한 퇴행성 측두하악장애는 교합 불안정과 개구장애 를 동반하기도 한다. 진단을 위해 CT나 MRI를 이용해 과두 형태 및 디스크 위치를 파악하 는 것이 유용한 접근법이다. 퇴행성 측두하악관절 환자는 CT나 MRI를 이용하여 진단하고, 과두-원판 재위치와 근 기능 개선을 위해 장기간 교합 안정장치 사용이 필요하므로 교정치료 기간에 변형된 교합 안정장치의 병용이 필요하다. 이에 본 연구에서 교합 안정장치를 병용하여 교합 재구성 증례를 CT나 MRI로 고찰해 보고자 한다.

Design and Implementation of a Simple 3D-Orthodontia Simulation System for Malocclusion Treatment (부정교합 치료를 위한 간단한 3D 치열교정 시스템의 설계 및 구현)

  • Kim, Chul-Hun;Lee, Shin-Ku;Shin, Jung-Hoon;Lee, Sang-Jun
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2012.06c
    • /
    • pp.350-352
    • /
    • 2012
  • 최근 의료 분야 소프트웨어가 발전함에 따라 3차원 가상 모델을 이용한 의료 소프트웨어의 개발도 꾸준히 증가하는 추세이다. 치열 교정 분야는 이러한 3차원 가상 모델을 적용할 수 있는 분야 중 하나이다. 치열교정 분야에서는 3차원 가상 모델을 이용하여 부정 교합 환자의 치료 초기부터 끝까지 여러 단계의 치아이동 과정을 제공한다. 치아 이동의 각 단계별로 Stereolithographic Model이 만들어지는데, 이는 투명하고 얇은 Overlay 장치를 제작하는 기초가 된다. 투명한 재질의 Overlay 장치는 심미적이고 사용이 간편하여 많은 환자들이 선호하고 있다. Overlay 장치를 제작하는 시스템을 구축한 회사로는 Invisalign System이 가장 대표적이다. Invisalign System은 미국에 본사를 둔 회사로 한국에 지사를 두고 적극적인 마케팅을 통해 3D 치열 교정 분야의 국내시장을 거의 독점하고 있다. 독점적이다 보니 비용이 다른 교정 치료보다 2배 가까이 들고 있지만, 현재 한국에서는 개발이 적극적으로 이루어지지 않는 실정이다. 이에 본 논문에서는 환자 치아의 정확하고 과학적인 진단자료를 얻어 높은 치료비용에 대한 개선과 치료 전 과정에 대한 시뮬레이션 및 Stereolithographic Model을 미리 환자에게 제공하여 만족도를 높일 수 있는 3D치열 교정 시스템을 제안한다.

The use of miniscrew as an anchorage for the orthodontic tooth movement (Miniscrew를 고정원으로 이용한 교정치료)

  • Kyung, Seung-Hyun;Lim, Jung-Ki;Park, Young-Chel
    • The korean journal of orthodontics
    • /
    • v.31 no.4 s.87
    • /
    • pp.415-424
    • /
    • 2001
  • Anchorage in orthodontics is very important factor for orthodontist to treat malocclusion from diagnosis and treatment planning to end of treatment. Skeletal anchorage like miniscrew is supposed to be more effective method in anchorage control than conventional anchorage which needs patient's good cooperation. So this article will be mentioned about various clinical application of miniscrew through the general investigation and case reports about orthodontic use of miniscrew, specially about screwing area and clinical consideration of miniscrew's screwing on midpalate. The changes of treatment philosophy and methods by using skeletal anchorage were summarized and following results were obtained. 1. The orthodontic anchorage changed from relative concept to absolute one. 2. Bodily movement of teeth gets easier and determinate force system is possible on biomechanical consideration. 3. Some part of treatment that needs surgical intervention is possible by just orthodontic treatment.

  • PDF

Case report: Laminate prosthesis with orthodontic treatment for achieve anterior esthetics and functional occlusion (심미와 기능 회복을 위한 교정- 라미네이트 수복 치료 증례)

  • Lee, Han Na
    • Journal of the Korean Academy of Esthetic Dentistry
    • /
    • v.23 no.2
    • /
    • pp.80-85
    • /
    • 2014
  • Orthodontic treatment is obviously the first choice to get aligned teeth cause of conservative treatment. But it is impossible to get highly esthetic result only orthodontic treatment in case of peg lateralis, discrepancy tooth size, discolored teeth or fractured teeth. As all treatment does, especially in esthetic treatment it is always required interdisciplinary diagnosis and treatment plan; orthodontics, periodontology, prothetics, implant therapy. As also, the treatment should be maintained long-term treatment with stable and harmonious state by esthetic satisfaction and functional occlusion those who needs various dental care as interdisciplinary treatment. This case is the laminate treatment with the orthodontic treatment on 37 ages/ Female patient who has cross bite at anteriors and premolar area and abrasion on centralis at right maxilla. By orthodontic treatment aligned teeth positions, it makes functional occlusion. As laminate treatment with minimum teeth preparation is able to release anterior esthetics. Follow up check for 2 years has been performed since the final prosthetics delivery to the patient. No sign of relapse, fracture of laminate were detected.

DIFFERENT IAL APPROACHES IN THE MALOCCLUSION WITH CANINE IMPACTION (견치 매복을 동반한 부정교합자의 다각적 교정치료)

  • Choi, Eun-Ah;Suhr, Cheong-Hoon
    • The korean journal of orthodontics
    • /
    • v.28 no.4 s.69
    • /
    • pp.669-679
    • /
    • 1998
  • During diagnostic process of the orthodontic patients, it is not unusual to find canine impaction. Generally, the chief complaint of the patients is crowding or antetior crossbite which is not related with canine impaction, but sometimes they complainted delayed eruption of the canine or deviation of the adjacent teeth caused by canine impaction. Orthodondists have to make the proper treatment plan according to final treatment goals. On the following cases, two patients were diagnosed as a malocclusion with canine impaction, and were treated by different accesses, one by extraction, and the other by non-extraction each.

  • PDF

A comparative study of pre- and post-treatment cephalometric measurements: Upper premolar extraction only vs. upper/lower premolar extraction groups (상악 편악 소구치발치와 양악 소구치발치에 의한 교정치료 전후의 측모 두부방사선계측법적 비교 연구)

  • Kim, Young-Seok;Kim, Su-Jung;Kang, Seung-Goo;Lee, Young-Jun
    • The korean journal of orthodontics
    • /
    • v.37 no.6
    • /
    • pp.421-431
    • /
    • 2007
  • The objective of this study was to provide guidelines for the diagnosis and successful treatment of orthodontic treatment with upper premolar extraction only Methods: The sample group consisted of 40 patients (20 with upper premolar extraction only, 20 with both upper and lower premolar extractions) who showed an overjet of more than 7 mm and were finished successfully. Lateral cephalographs were taken before and after orthodontic treatment. Landmarks showing the position of the upper and lower incisors and the position of the upper and lower lip were determined and angular measurement of these values were obtained for statistical analysis (Mann-Whitney test). Results: At pre-treatment, the position of the lower incisor was less labially inclined and the convexity of the lower lip was smaller in the upper premolar extraction only group than in the upper/lower premolar extraction group. At post-treatment, there was no difference in all measurements except for the position of the lower incisor. A comparison of changes between pre- and post-treatment showed that the retraction of upper & lower incisors and the decrease in convexity of the lower lip were greater in the upper/lower premolar extraction group. Conclusions: Treatment by upper premolar extraction can be of benefit for patients whose lower incisor proclination and lower lip protrusion are not excessive.

An Efficient Correction Process of CT-Simulator Couch with Current Diagnostic CT Scanners (진단용 CT-모의치료기 테이블의 효율적인 교정 방법)

  • Goo, Eun-Hoe;Lee, Jae-Seung;Cho, Jung-Keun;Moon, Seong-Kwon
    • The Journal of the Korea Contents Association
    • /
    • v.9 no.11
    • /
    • pp.254-261
    • /
    • 2009
  • This study suggested that the table of CT-simulator and the laser alignment system using diagnostic CT scanner have an efficient method for improvement in alignment between the planned target center of traverse image with CT scanner. It was conducted on the daily QA when presented in the AAPM TG66 with correcting the laser alignment system using geometric trigonometric functions and investigated the effectiveness of correction methods as compared with those before and after correction. Before correction error was 3.82mm between the planned target center of image, the table longitudinal axis was twisted with 0.436o. The laser alignment system using geometric trigonometric functions in after correction was satisfied with tolerance limits of ${\pm}2mm$ when occurred about 0.7mm in errors between the planned target center. The table correction to satisfy the geometric accuracy is very inefficient over against the time and economic loss as well as technical limits in the case of application as only radiation therapy associated with CT-simulator with diagnostic CT scanner in use. But, the method which corrects the laser alignment system is economic and relatively simple with possibility of getting well geometric accuracy and we suppose that it is efficient method for applying in the clinic.

Relationship between locus of control and treatment compliance in adult orthodontic patients (성인교정환자의 내외통제소재와 치료협조도에 대한 연구)

  • Lee, Shin-Jae
    • The korean journal of orthodontics
    • /
    • v.32 no.2 s.91
    • /
    • pp.71-78
    • /
    • 2002
  • It could be suggested that adult orthodontic patients may have peculiar psychological features as well as different periodontal tissue conditions compared with adolescent patients. The aims of the present investigation were to explore the relationships between psychological characteristics and treatment compliance of patient to orthodontist and assistants (dental hygienists). Two types of locus of control data (I-score, Internal locus of control score ; E-score, External locus of control score) were obtained for 312 adult patients and 765 adolescents and then analyzed in relation to their sex and treatment compliance. In general, orthodontic patients showed higher I-score trends than ordinary persons and adult patients manifested higher I-score than adolescent patients. Unlike adult patients, female adolescent patients showed higher I-score than male adolescent patients. Adult patients with higher E-score and adolescent patients with higher I-score than their counter-part subgroup were classified into more compliant group. Orthodontist performed more generous decision about patients' compliance than assistants. The results of this study also suggest that psychological survey in orthodontic field could comprise useful diagnostic criteria.