• Applied Biological Chemistry
• /
• v.39 no.4
• /
• pp.327-331
• /
• 1996

This experiment was conducted to establish the efficient extraction condition for anthocyanin and tannin pigments contained in rice bran of colored rices. Efficiency of the pigment extraction was maximum when the concentration of mired solvent of methanol(3) : ethanol(7) was 70%. In purple rite(anthocyanin pigment), ‘Kilimheugmi’, 80% ethanol containing 0.5% malic acid showed the highest extraction efficiency and stability with a maximum absorbance wavelength$(\lambda_{max})$ at 538 nm. In red rice(tannin pigment), ‘Jagwangdo’, 80% ethanol containing 0.01% citric acid showed the highest extraction efficiency and stability with a maximum absorbance wavelength$(\lambda_{max})$ at 456 nm. The relative optical density of the pigments increased until the solvent temperature was reached at $70^{\circ}C$, but drastically decreased over at $90^{\circ}C$ due to color change. The higher amount of the pigment was ertracted from the longer shaking time of the solvent. Ten minutes was enough for the grinding time of rite bran in solvent. Supernatant of the pigment extractives after one day storage at $4^{\circ}C$ in dark chamber revealed higher optical density than the filtration of the pigment extractives.

• Journal of Life Science
• /
• v.21 no.1
• /
• pp.56-61
• /
• 2011

This study was performed to investigate effective extract conditions in fronds of the Ostrich fern (Matteuccia struthiopteris) to increase antioxidant compound contents and antioxidant capacity. Powder (1 g) of lyophilizated fronds were mixed with 3 kinds of solvents (MeOH, 80% EtOH and water). Extractions were carried out using not only immersion (room temp.), heating ($60^{\circ}C$) and stirring (200rpm) for 6 hr, but also through sonication in a 42 kHz ultrasonic bath for 15, 30 and 45 min. Extracts were filtrated and measured for contents of soluble solids (SS), total polyphenols (TP; tannic acid as a standard) and total flavonoids (TF; Naringin as a standard). Antioxidant activity was expressed as $RC_{50}$ for DPPH and ABTS radical scavenging. SS (0.317 $g{\cdot}g^{-1}$ db), TP (70.90 $mg{\cdot}g^{-1}$ db) and TF (41.53 $mg{\cdot}g^{-1}$ db) contents reached their highest levels when 30 minute sonication extraction with 80% EtOH was performed, and the highest DPPH and ABTS scavenging activity was observed in the same extraction conditions ($RC_{50}$=0.14 $mg{\cdot}ml^{-1}$ and 0.09 $mg{\cdot}ml^{-1}$, respectively). From the present investigation, it can be concluded that fronds of the ostrich fern can be used as a natural material for antioxidants, and sonication for 15-30 min with 80% EtOH is an ideal extraction method for increasing their antioxidant effects and saving extraction time.

• Analytical Science and Technology
• /
• v.13 no.5
• /
• pp.666-674
• /
• 2000

The present study describes an analytical method for the determination of polybrominated biphenyls (PBBs) in biota samples by gas chromatography-mass spectrometry (GC/MS). PBBs are extracted twice from 20 g samples with mixture solvent 40mL acetone and 80mL hexane using ultrasonic agitation for 20 min. Lipids in extracts are degraded by concentrated sulfuric acid and then PBBs are purified with Florisil column. The purified extracts are analyzed by GC/MS-selected ion monitoring mode for the quantitation of PBBs in biota sample. The overall recovery yields of PBBs range between 77 and 111% under these experimental conditions.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.1
• /
• pp.60-66
• /
• 2008

Laboratory soil washing experiments with HCl or EDTA were conducted to remediate lead-contaminated soil in a firing range. After lead bullets were removed by standard sieve #18 (1.0 mM), Pb concentrations were measured by EPA Method 3050B (9,443 mg/kg) and Korea Standard Test (4,803.5 mg/kg). The results of the batch test showed that the removal efficiency curve was logarithmic and approximately 90% of lead in soil was removed, when HCl was used. In case of EDTA, the removal efficiency increased proportionally to the concentration of EDTA, up to 98% lead removal with 0.1M EDTA. High mixing strength resulted in increase of removal efficiency and kinetics showed that the most lead was extracted in 10 min.

• KSBB Journal
• /
• v.8 no.3
• /
• pp.295-299
• /
• 1993

The effect of fungal elicitor, Pluronic F-68 and methylcellulose on suspension culture of M piperita cells was investigated in shake flasks. About a two-fold increase in oil production was observed in response to the treatment of the fungal elicitor prepared from Rhodotorula rubra. Low concentration of Pluronic F-68 or methylcellulose enhanced Peppermint cell growth at 100 rpm of agitation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.6
• /
• pp.1000-1005
• /
• 2004

Structured lipids (SLs) were synthesized by acidolysis of crude oils (corn and peanut oil) and conjugated linoleic acid (CLA) with a molar ratio of 1:3 (extracted oil:CLA) in a shaking water bath. The reaction was performed for various reaction time (1, 2, 3, 6 and 24 hr) at 55$^{\circ}C$ with 175 rpm catalyzed by sn -1,3 specific IM 60 lipase from Rhizomucor miehei. The content of the incorporated CLA increased with the prolonged reaction time, showing 7.5∼9.3 ㏖% in the synthesized SL triacylglycerol molecules from the extracted corn and peanut oil. However, total tocopherol content in SLs decreased up to about 20% compared to the content in extracted oils. Among the CLA isomers, 6.3∼7.5 ㏖% of cis 9,trans 11- and trans 10,cis 12-CLA known as physiologically active compounds are contained in corn and peanut SLs.

• The Korean Journal of Pesticide Science
• /
• v.18 no.4
• /
• pp.358-363
• /
• 2014

We was investigated parasporal inclusion proteins change to use industrial medium of new strain Bacillus thuringiensis CAB 565, CAB 566. To confirm medium's oxygen efficient consist of glucose and yeast extract, we was conducted oxygen transfer coefficients (KLa) of medium's concentration and impeller in 20 l-Jar fermentor. When to increase air flow rate and medium concentration, KLa rate is rise. Also it is effective on agitation rate 200 rpm, but KLa rate is decrease when to rise agitation rate. To hold dissolved oxygen rate (upper 50%), Air flow rate is steadily increase on culture to use microsparger. When 16 hour of culture stage, B.t. CAB 565 and B.t. CAB 566 harvested respectively $2.3{\times}10^{10}$, $1.8{\times}10^{10}$ viable cell/ml. When 54 hour, B.t. CAB565, 566 harvested respectively $1.9{\times}10^{10}$, $1.4{\times}10^{10}spore/ml$. To resulting carbon's concentration, It is the most effective that glucose concentration is contained 5% in medium.

• Applied Chemistry for Engineering
• /
• v.26 no.2
• /
• pp.234-238
• /
• 2015

The separation of nitrogen heterocyclic compound (NHC) contained in a model coal tar fraction was compared by the methanol and formamide extraction. The model coal tar fraction comprising four kinds of NHC (NHCs : quinoline, iso-quinoline, indole, quinaldine) and three kinds of bicyclic aromatic compound (BACs : 1-methylnaphthalene, 2-methylnaphthalene, dimethylnaphthalene), biphenyl and phenyl ether was used as a raw material. The aqueous solution of methanol and formamide were used as solvents. A batch-stirred tank was used as the raw material - a solvent contact unit of this work. Independent of the solvent used, the distribution coefficient of NHCs sharply increased by decreasing the initial volume ratio of water to the solvent and increasing the equilibrium operation temperature, whereas, the selectivity of NHCs in reference to BACs decreased. Decreasing the initial volume ratio of solvent to feed resulted in deteriorating distribution coefficients, but the selectivity of NHCs in reference to BAC was almost the constant. The distribution coefficient of NHCs by the methanol extraction was 3~5 times higher than that of NHCs by the formamide extraction, inversely, the selectivity of NHCs based on BACs by the formamide extraction was 3~7 times higher than that of NHCs by the methanol extraction. Furthermore, two different solvent extraction methods by adding the extraction processing speed to the balance between solvency and selectivity of NHCs were compared.

• Journal of the Korean Chemical Society
• /
• v.56 no.5
• /
• pp.583-590
• /
• 2012

The HF (Hollow fiber) extraction method was optimized to analysis seven species of pesticides in aqueous sample and analyzing samples by GC/MS. Hollow fiber extraction showed good efficiency when it was conducted under these conditions: organic solvent was toluene and agitation speed was 1200 rpm. The 15% concentration of NaCl was optimized when it was experimented between 5% and 25%. The equilibrium time was determined at 15 minutes. The pH 5 showed the best effect on the extraction efficiency. The linearities of calibration curves of seven species were good with correlation of regression ($r^2$) over 0.995 when they were experimented over a concentration range of $5{\mu}g/L$ to $50{\mu}g/L$. The analytical data exhibited the detection of limits (LODs) range of $0.37{\mu}g/L$ to $1.23{\mu}g/L$ and the limit of quantification (LOQs) range of $1.19{\mu}g/L$ to $3.91{\mu}g/L$. The optimized HF-LPME extraction method provides a simple and effective preparation and requires small amount of organic solvents and samples compared to conventional pre-treatment methods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.438-445
• /
• 2017

Tanzania has abundant copper deposits, but copper-metal extraction remains low there, owing to the lack of suitable copper recovery processes and insufficient funds for developing mining technologies. Accordingly, leaching and solvent extraction methods for the extraction of copper from copper ore were studied with a particular emphasis on developing a simple processing method for small-scale copper mining. Chrysocolla ore was used as the copper-bearing mineral and sulfuric acid was used as the leaching reagent. A maximum copper recovery of 95.1% was obtained when the particles in the sample were smaller than $53{\mu}m$, the concentration of 98%(w/w) sulfuric acid in the leaching solution was 5.0 g/L and the stirring rate was between 60 and 80 rpm. The highest selectivity of $Cu^2+$ in the solvent extraction was obtained using 15% LIX-70 in kerosene. In the pH range from 0.5 to 3.0, the efficiency of $Cu^2+$ extraction increased with increasing pH. However, at pH values higher than 3.0, other metal ions were extracted into the organic phase more readily than $Cu^2+$. The highest solvent extraction rate obtained was 96.5% at pH values of 2.0 and 3.0 using 15% LIX-70.