• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.8
• /
• pp.641-648
• /
• 2009

The study presents sewage sludge flotation and thickening efficiencies which changes chemical conditioning and mixing conditions using a flotation thickening system with a microbubble generating pump. Flotation and thickening of sewage sludge are shown to significantly influence kinds of coagulants more than Gt values. It is found that the flotation and thickening efficiencies for kinds of coagulants follows the order: $Al_2(SO_4)_3$ < PSO-M < $Fe_2(SO_4)_3$. We shows that the flotation thickening system(1.6 $m^3$/d) could be continuously operated during two hours on operation conditions in the lab-scale experiments. Sludge thickening efficiency in the A/S ratio of 0.029 - 0.019 mL/mg was found to be very efficient, reaching to 300.0~335.7%.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.40 no.2
• /
• pp.18-28
• /
• 1998

현재의 가축분뇨처리 형태와 축종별 적용대상은 표 3과 같이 분류되며, 축분 퇴비화 뇨오수 정화방식의 고액분리 형태에서 분뇨혼합물의 동시처리 즉, 깔감축사(소, 돼지), 슬러리 발효 퇴비화를 통한 무방류 시스템으로 변화되는 추세이다. 이러한 현상은 최근의 방류수질 규제강화에 따른 무방류화 저비용 단순화를 지향하고 있으며, 무방류화의 가장 큰 걸림돌은 톱밥과 같은 수분조절재 부족이라 할 수 있다. 현재 이용되고 있는 주요 시스템별 개선안은 다음과 같다. $\square$ 주요 처리 시스템 적용의 문제제기 $\circ$ 축분발효시설 - 톱밥 등 부자재 무이용을 위한 축분의 예비 건조시설 이용 - 교반식 발효기의 악취확산방지를 위하여 밀폐형 하우스 및 강제환기 장치 설치에 의한 악취 포집 및 탈취 - 중소규모 발효시설 개발 $\circ$ 화력건조 - 예비건조를 통한 톱밥, 연료비용 절감 - 악취방치 장치부착 의무화 $\circ$ 활성오니 정화시설 - 시설 운전관리 단순화 - 1차 고액분리를 통한 유입수 오염부하량 감소 및 균일화 $\circ$ 깔감축사 - 경제적으로 흡수를 극대화할 수 있는 수분조절재의 조합비 결정 및 혼합물을 깔감으로 재이용 기술개발 $\circ$ 슬러리 발효퇴비화 시설 - 톱밥 등 수분조절재 사용량 절감기술 - 증발량 극대화 기술개발 및 소요에너지 최소화기술개발 우리나라는 사계절이 뚜렷하여 외기상에 따라 편차가 심하며, 고밀도 사육 및 지역적 편중성, 경지면적 협소, 고비용 시장구조 등의 축산환경을 고려한다면 근원적으로 가축분뇨문제 해결한다는 것은 결코 쉬운 일이 아니다. 이는 저공해 사료개발에서부터 분뇨가 발생단계에서 분리, 수거할 수 있는 수거시설, 고효율 분뇨처리시스템의 정립, 액비 및 퇴비의 가공, 토양환원되었을 때 작물생장장애, 액비, 퇴비의 유통, 가축분뇨처리 정책 및 규제법 등의 각 분야에서 복합적 노력이 필요하다.

• Journal of agriculture & life science
• /
• v.53 no.5
• /
• pp.137-143
• /
• 2019

To manufacturing of solid fuel by reuse of the wastes, the drying unit which have 500 kg/hr of drying capacity was developed and experimentally evaluate the performance. The spinach grown in Nam-hae island were used for the experiments and investigated of the heated-air drying characteristics as the inlet amount of raw materials, raw material stirring status, conveying type and drying time. The drying air heated by the energy derived from the steam which is supplied from the incineration plant. The moisture contents of raw materials were measured 85.65%. The inlet flow rate of drying air made a difference as the depth of the raw materials loaded on the drying unit and temperature has showed 108~144℃. The drying speed of the mixed drying more than doubled as that of non mixed drying under the same drying type, inlet amount, drying time and drying air temperature. In each experiment, the drying capacity have showed over 500 kg/hr. A drying efficiency of the ratio of drying consumption energy to input energy was 33.46%, lower than the average of 57.76% for the 157 conventional dryers. Because developed dryer must have a drying time of less than one hour, it is considered that the dry efficiency has been reduced due to the loss of wind volume during drying. If waste heat from incineration plant is used as a direct heat source, the dry air temperature is expected to be at least 160℃, greatly improving the drying capacity.

• Korean Journal of Organic Agriculture
• /
• v.17 no.2
• /
• pp.253-264
• /
• 2009

This study was conducted to establish agricultural practices to control diseases and insects for chemical pesticide-free cultivation of leafy vegetables. Two diseases, gray mold(Botrytis cinerea) and soft rot(Erwinia carotovora), on lettuce were reduced by controlling temperature and humidity using air-circulation fan. The aphidophagous lady beetle(Harmonia axyridis) and primary parasitoids(Aphidius colemani) showed activity to control aphids density on Chinese cabbage. Co-application of cooking oil and yolk mixture (COY) and BT(Bacillus thuringiensis) decreased diseases including soft rot(Erwinia carotovora), downy mildew(Peronospora brassicae Gaumann), and powdery mildew(Eryslphe polygoni), and insects such as diamondback moth(Plutella xylostella) and beet armyworm(Spodoptera exigua Hubner). Neem extract treatment reduced downy mildew(Peronospora destructor) on Welsh onion.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1995.10a
• /
• pp.41-42
• /
• 1995

기존의 정수처리 공정은 응집-침전-급속여과처리를 주로 사용하면서 생물 활성탄처리-오존처리 등을 거치는 공정으로 이루어져 왔다. 그러나 응집제의 투여시 최적 응집제량, 최적 응집제 투여위치, 교반시간, pH 조절 등 번거러운 test가 선행 되어야 하며 처리수에 남아있는 응집제에 의해 2차 오염을 일으켜 침전조의 부지 면적에 따른 대형화등을 초래할 단점이 있다. 따라서 최근에는 이러한 단점을 보완하고 장치의 간소함, 높은 효율의 유지에 따른 후처리 공정의 부하감소 및 운전 조건 인자등의 감소라는 경제적 효과를 기대할 수 있는 막분리공정이 도입되었다. 그러나 분리막 처리공정의 경우 원수에 다량 포함되어 있는 콜로이드 입자들에 의한 flux의 감소 및 fouling 현상으로 인한 막의 수명감소, 처리수량의 감소 및 최적 설계 및 운전 방법등의 새로운 공정에 대한 많은 자료의 확보가 필요하다. 따라서 본 연구는 기존의 정수처리 공정에 있어서 전처리 부분에 해당하는 응집-침전-급속여과처리 공정을 분리막 공정으로 대체 하였을 때 분리막의 재질 및 module의 차이에 따른 처리 능력을 비교하고 각 단위 공정들에 의한 flux 변화, 각 공정별 수질분석, 회복율, 회수율 등을 검토하여 최적 조건의 공정을 확립하여 후처리 공정의 효율을 극대화 하는데 있다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.59.1-59.1
• /
• 2009

레독스 흐름 배터리 (Redox Flow Battery)는 외부의 탱크 등에 저장해 둔 활성물질(이온 가수가 변화는 금속) 의 용액을 펌프로 전해셀에 공급하여 충전 방전하는 배터리로 신재생 에너지인 풍력과 태양광 발전, 야간의 잉여 전력 저장 등 대용량 전력 저장 장치로 관심이 높아지고 있다. 대표적인 레독스 흐름 배터리로 알려진 바나듐 레독스 흐름 배터리는 이온 교환막 사용으로 인하여 전기전도도, 기계적 강도, 투과도 및 전해질 내의 화학적 안정성 등 여러 가지 문제점과 함께 비용 문제점을 야기한다. 하지만 새로운 용해 납 레독스 흐름 배터리는 이온 교환막을 사용하지 않아 바나듐 레독스 흐름 배터리의 문제점 및 시설비가 절약되는 장점이 있어 새로이 연구되지고 있다. 본 연구는 레독스 흐름 배터리에 주로 이용되는 카본 전극재료의 따라 형성되는 Pb, $PbO_2$ 박막의 미세 구조를 및 에너지 효율 특성을 분석하였다. 실험은 half-cell로 이루어졌으며 작업전극은 Carbon felt, Ordered Graphite, Disordered Graphite, Glassy Carbon 등을 여러 카본 재료를 사용하였고, 상대전극은 Pt, 기준전극으로 Ag/AgCl를 사용하여 Cyclic Voltammetry특성과 충방전 특성을 연구하였다. 전해질은 Lead Carbonate ($PbCO_3$)+Methanesulfonic acid ($CH_3SO_3H$) 들어간 수용성 전해질을 교반을 통해 이용하였다. 여러 carbon 전극재료와 생성된 Pb, $PbO_2$ 막의 표면구조, 미세구조, 상들의 변화는 XRD, SEM, EDX, Raman등을 통하여 분석하였으며, 전기화학 공정의 변수와 전극에 따른 에너지 효율특성에 대하여 고찰해 보았다.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.5
• /
• pp.303-310
• /
• 2014

This study investigated the reduction of food waste through the slurry phase decomposition in a source of food waste by microorganisms. The reactor used in the experiment was composed of both woodchip with wood material and sponges with polyurethane material as media of attached microorganisms, and food waste was mixed with a constant cycle consisted of a stirring device. During the experimental period of 100 days, the change in weight over the cumulative total amount of food waste added was reduced by 99%. Approximately, 1% of the residual food waste could be inherently recalcitrant materials (cellulose, hemicellulose, lignin, etc.) and thus was thought to be the result of the accumulation. The initial pH in wastewater generated from food waste was low with 3.3 and after 24 hours treatment this pH was increased to 5.8. The concentrations of COD, BOD, SS, salinity, TN and TP were gradually decreased. Food waste decay was proceeded by the seven species microorganisms identified and confirmed in this study, making a slurry phase and thus reducing residual food wastes. In the initial phase, the microbial population was approximately $3.3{\times}10^4$ cell/mL, and after 15 days this population was a constant with $5.1{\times}10^6$ cell/mL which means a certain stabilization for the reduction of food wastes. From these results, it can be considered that organic matter decomposition as well as the weight loss of food wastes by microorganisms is done at the same time.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.4
• /
• pp.129-137
• /
• 2000

In this study, biological treatment process of MWWT(Municipal wet-waste Treatment) has been developed through a moduling of the containerized closed ATAD(Auto thermal aerobic digestion) system & closed vertical dynamic acerator, which were used for food waste and cattle manure, respectively. Though biological process has several advantages such as low concentrations of heavy metals and salts, proper and stable C/N ratio and constant reaction rate against the process treating two wastes separately, it has a obstacles of salt concentration and much usage of bulking agent such as wood chip. After rapid oxidation in the boxed tower reactor for 5 days, the content of sewage sludge would be reduced 65% on around, might be mixed with the food waste that had been treated in the static closed reactor during 6 days and put in the secondary static reactor for curing. During composting process, the odor contained in the gas generated from the reactor was removed by passing it through a biofilter as well as the leachate was treated in the wastewater treatment facility. Consequently, it seemed to be possible to compost sewage sludge at mild and stable operating condition and at low cost through the biological ATAD process resulting in the production of organic compost satisfying the specifications regulated by itself.

• Clean Technology
• /
• v.13 no.1 s.36
• /
• pp.34-45
• /
• 2007

Phase behavior of the ternary systems of water-insoluble simvastatin drug, which is well known to be effective drugs for hypercholesterolemia therapy, in solvent mixtures of dichloromethane and supercritical carbon dioxide was investigated to present a guideline of establishing operating conditions in the particle formation of the drugs by a supercritical anti-solvent recrystallization process utilizing dichloromethane as a solvent and carbon dioxide as an anti-solvent. The solubilities of simvastatin in the mixtures of dichloromethane and carbon dioxide were determined as functions of temperature, pressure and solvent composition by measuring the cloud points of the ternary mixtures at various conditions using a high-pressure phase equilibrium apparatus equipped with a variable-volume view cell. The solubility of the drug increased as the dichloromethane composition in solution and the system pressure increases at a fixed temperature. A lower solubility of the drug was obtained at a higher temperature. The second half of this work is focused on the particle formation of the simvastatin drug by a supercritical anti-solvent recrystallization process in a cylindrical high-pressure vessel equipped with an impeller. Microparticles of the simvastatin drug were prepared as functions of pressure (8 MPa to 12 MPa), temperature (303.15 K, 313,15 K), feed flow rate of carbon dioxide, and stirring speed (up to 3000 rpm), in order to observe the effect of those process parameters on the size and shape of the drug microparticles recrystallized.

• Microbiology and Biotechnology Letters
• /
• v.29 no.4
• /
• pp.240-247
• /
• 2001

The effect of microsparged aeration in mammalian cell bioreactor on the oxygen transfer rate and cell viability was studied. The microspargers with differ- ent micron-sized pores were used to supply oxygen to the medium. The oxygen transfer coefficients (k$_{L}$a) measured in the bioreactor were markedly increased, which is due to the increase of the contacting area between air bubbles and liquid medium when the pore size of microsparger decreases. When the impellers of two different types (square-pitch marine impeller and $45^{\circ}$ pitched flat blade impeller) were used for agitation, the k$_{L}$a values were slightly higher with the marine impeller than with the blade impeller. The detrimental effect of direct gas sparging with microsparger on mammalian cells was investigated in bubble columns with various air flow rates and different pore sized microspargers. The first-order cell death rate constant ($k_{d}$ /7) was shown to be directly proportional to the air flow rate and inversely proportional to the pore size. During the cultivation of hybridoma cells using microsparger with the pore size of $0.57\mu$m in the mammalian cell culture bioreactor, the continuous sparging caused the cell death and suppressed the cell growth. However, cells grew normally and cell viability was maintained above 90% in the logarithmic phase when the air was intermittently sparked in order to maintain the dissolved oxygen level above 20%.