• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.157-160
• /
• 2008

The confined concrete subjected multi-axil stresses have been known as the strength of concrete increases significantly. Many researchers have studied in confining effect of concrete, and now are studying in many fields. Lap splices were located in the plastic hinge region of most bridge piers that were constructed before the adoption of the seismic design provision of Korea Highway Design Specification on 1992. But sudden brittle failure of lap splices may occur under loading. This study introduces a new method to retrofit RC bridge columns with lap splice which do not have enough ductility during an earthquake. The new method use mechanical external pressure and steel plates around RC columns. The jacketing built following the new method shows good results of increasing the compressive strength and ductility of concrete cylinders. The thicker steel jacket shows larger compressive strength, however, the ductility at failure depends on the welding quality of steel jackets. In this study, The effect of the new method is verified through comparing the results of the compressive tests and analysis results.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.57-60
• /
• 2008

Maglev is a system that a train runs levitated above a rail. Therefore it is very important to maintain a constant levitation gap for achieving serviceability and ride comfort. This study is a cooperation research subject of the 3-1 subject, performance improvement of maglev track structures, of the Center for Urban Maglev Program in Korea, started in 2006. The aim of this study is development of rapid constructions of bridge superstructure for maglev. At present, precast deck is widely used because of its superiority to cast-in-place concrete on quality and the term of works. The research group suggested basic systems of maglev guideway with PSC-U type and trapezoidal open steel box type girder, and precast deck, cooperating with Korea Railroad Research Institute, the managing institute of the 3-1 subject. In this study, a mock-up consisted of girders, decks and rail was fabricated and test was performed for constructability, serviceability and maintenance evaluation of PSC U-type girder, precast deck, and new guide rail system.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.5
• /
• pp.259-266
• /
• 2018

This is the study for developing the hetero-core optical fiber sensors which are purpose to measure the prestress of PSC bridges during the life cycle period. The goal of this study is to improve the resolution of hetero-core sensors. As a result of the test, it is possible to measure the displacement in $2{\mu}m$ increments. In other words, if the length of the sensor module is 30cm, it is possible to measure the prestress variations in 0.2MPa increments at specified compressive strength of concrete(fck) of 40MPa by Hook's Law. So it can be useful for development of a sensor module measuring internal prestress measurement.

• Journal of the Korea Concrete Institute
• /
• v.13 no.4
• /
• pp.397-405
• /
• 2001

In clod weather regions, a strong seasonal wind brings sea salts to the land. In addition to it, recently, the spreading amount of deicing salts has increased numerously for purpose of removing snow and ice. Thus the salts environment around concrete structures becomes so severe that various damages of concrete due to applied salts will be brought up. Much of countries such as America, Europe etc. is carried out study for effects of deicing salts on concrete. However, there are not test methods for deterioration of concrete subjected to both freezing-thawing and chloride in Korea. In this study, we carried out test for the compound deterioration subjected to both freezing-thawing and chloride attack, to investigate the effects of sodium chloride on the deterioration of concrete. The test was performed to investigate the effects of cement type, strength and air content on the scaling deterioration of concrete. As a result, the scaling deterioration was accelerated in the presence of salts. And the resistance to scaling was strongly influenced by the type of cement, the strength and air content of concrete.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.5 no.4
• /
• pp.227-233
• /
• 2001

최근 비약적인 경제발전에 힘입어 장대교량, 항만, 댐, 도로, 원자력 발전소 등과 같은 대규모 기간구조물의 건설이 증가하고 있으며, 구조물은 대형화 혹은 고강도화되는 추세에 있다. 특히, 전술한 구조물을 매스콘크리트로 가설하게 되면 초기재령시에 수화열로 인한 균열이 발생할 가능성이 매우 높기 때문에 효율적인 매스콘크리트의 개발과 매스콘크리트 구조물의 설계기술 및 시공방법이 중요한 연구대상으로 등장하게 된다. 본 논문에서는 가로 52.6m, 세로 14.4m, 높이 8.5m의 기계기초 매스콘크리트의 시공에 적합한 온도관리기법을 다음과 같은 단계로 제안하고자 한다. 먼저 온도상승요인을 최소화하는 콘크리트의 배합비를 산정한다. 산정된 콘크리트의 열특성을 측정하기 위해 단열온도실험을 수행하여 각종 열특성상수와 단열온도 상승곡선식을 도출한다. 이와 같은 열특성치를 콘크리트 구조체에 적용하여 열응력해석을 수행한다. 이와 같은 열응력해석을 통하여 구조물의 분할타설높이에 따라 온도균열이 발생하지 않는 콘크리트 내외부의 온도차를 결정한다. 이때 열응력해석에 범용 유한요소 프로그램인 Diana을 사용한다. 콘크리트의 타설은 현장조건과 타설시점을 최대로 고려하고 양생방법으로 콘크리트 내외부의 온도차를 최소화하기 위해 이중단열효과가 있는 거푸집과 가열장비을 사용한다. 또한 콘크리트의 온도관리를 위하여 구조물 내외부에 온도게이지를 매립하고 30분마다 계측을 수행하면서 콘크리트 내외부 온도차가 허용 해석범위를 유지하도록 한다. 양생기간은 7-10일 정도를 유지한다. 전술한 온도관리기법을 통하여 완공후 수평정밀도가 기초의 허용침하량으로 환산하여 $1{\mu}m$ 인 고정밀도의 기계기초는 완벽하게 시공되었다. 따라서 매스콘크리트의 온도균열을 제어할 수 있는 시공방법으로 제안한다. 또한 매스콘크리트의 내외부 온도차를 단열온도실험과 온도해석으로부터 정한 값이내로 제어하고 충분한 양생관리를 병행하면 수화열에 의한 콘크리트의 온도균열을 최소화할 수 있을 것으로 기대한다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.4
• /
• pp.27-34
• /
• 2016

A new algorithm for determining optimal accelerometer locations is proposed by using a frequency-domain Hankel matrix which is much simpler to construct than a time-domain Hankel matrix. The algorithm was examined through simulation studies by comparing the outcomes with those from other available methods. To compare and analyze the results from different methods, a dynamic analysis was carried out under seismic excitation and acceleration data were obtained at the selected optimal sensor locations. Vibrational amplitudes at the selected sensor locations were determined and those of all the other degrees of freedom were determined by using a spline function. MAC index of each method was calculated and compared to look at which method could determine more effective locations of accelerometers. The proposed frequency-domain Hankel matrix could determine reasonable selection of accelerometer locations compared with the others.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.610-610
• /
• 2012

한강하구는 국가하천인 한강, 한강의 1지류인 임진강과 북한 황해도의 예성강이 만나 한강하류 수역을 형성하여 서해 중부해역과 합류하여 매우 복잡한 수리학적 특성을 지닌다. 또한 한강하구의 경우 교량, 수중보 등의 하천 구조물이 설치되어 있다. 수리학은 크게 수위와 관계되는 현상, 하상변화와 관계되는 현상, 외부 환경과 관계되는 현상으로 살펴 볼 수 있다(최계운, 2005). 하천구조물이 설치됨에 따라 구조물 주변에서 국부적으로 수위가 상승되거나 유속이 변화, 세굴현상 등의 하상 변화, 구조물 설치에 따른 생태계의 단절 현상 등 수리학적 현상에 영향을 미치게 된다. 한강하구는 이러한 복잡한 흐름현상에 더해 군사적으로 민감한 지역의 특성으로 현장의 접근성에 한계가 있어 이 지역의 연구조사는 더욱 어렵다. 그간 한강하구의 흐름 현상을 규명하기 위한 연구 방법으로 수치모의를 통한 다양한 연구가 진행되어 왔다. 수리학적 흐름 현상을 계산하기 위한 필수 조건인 하류경계조건 설정에도 어려움이 수반된다. 이 때문에 한강의 수리학적 수치모의 실험에 관한 연구들은 한강하구의 얕은 수심과 해석의 공간적 범위를 소홀히 하고, 공릉천 합류부를 기준으로 하류지점에 대해서는 인천 조위관측소의 조위자료를 사용하거나 하천정비기본계획상의 기점수위를 일괄적으로 적용하여 지점에 따른 수위의 차이를 적용하지 못하는 한계를 지닌다. 따라서 본 연구에서는 남북접경지역 접근의 어려움으로 인하여 발생되는 한강하구 흐름해석의 불확실성을 명확히 하기 위한 방안으로 한강하구지역에 해당 군부대와 군사정전위원회의 출입허가 승인을 얻어 현장조사를 실시하였다. 사전조사를 통하여 성동교, 대산교, 공릉천, 화도돈대, 철곶돈대 전방 수변, 애기봉전망대 전방 수변을 조사 지점으로 선정하였다. 기존 연구에서는 한강하구의 공릉천 합류부 지점을 하류경계조건으로 채택하고 있으나, 현장조사를 통하여 얻을 자료를 분석한 결과 공릉천 합류부 지점의 수위는 강우발생에 대한 하천의 영향을 받는 것으로 나타나 하류경계조건으로 적정하지 않은 것으로 판단되었으며, 공릉천보다 하류지역에 위치한 지역에 대하여 하류경계조건으로 적정한 지역을 찾을 수 있었다. 수치해석 시에는 공간적 범위와 연구의 목적을 고려하여 각 지점의 실제 관측 자료를 활용한 경계조건을 사용하는 것이 적합한 것으로 판단되며 보다 많은 현장조사와 특성분석을 통한 정확한 경계조건의 구축이 필요할 것으로 사료된다.

• Tunnel and Underground Space
• /
• v.21 no.1
• /
• pp.1-10
• /
• 2011

In these days, the development of optical fiber sensor technology is so remarkable that it can measure various physical and chemical quantities ranging from a few millimeters to over several kilometers. In addition, it is attempted to assess the structural integrity of the state of the advanced technologies and existing structures such as ships, aircrafts, and bridges. This paper introduced the case histories of the measuring technology of optical fiber applied on structures such as roads and tunnels. The case history using OTDR (Optical Time Domain Reflectometery) was also introduced in this paper. Measurement of the pre-convergence of a tunnel is essential to assess the safety of a tunnel and understand the geological conditions ahead of an advancing tunnel. Therefore, the pre-convergence measuring technology using OTDR is expected to substitute conventional measuring techniques.

• The Journal of the Korea Contents Association
• /
• v.9 no.6
• /
• pp.325-335
• /
• 2009

The effects of the U-Police Service is expected to go much beyond present police service. Scientific police service using the UIT will enable the police to confront rapidly to the crimes which has been in the blind spot of law enforcement in the result of insufficient police forces and maintenance of law and order by putting police manpower first. Cetizens' feeling of safety from crimes is also expected to be much improved and this will bring about noticeabe effect on crime prevention by suppressing the crime impulse in advance. This thesis have come up with various research results by interviewing police officers and citizen of the City of Seoul under the circumstances that there has been no positive and analytical studies on the areas that the UIT could apply to or the possibility of utilizing the UIT. As we apply the UIT to the police service, how we solve the problem occurring by adopting the UIT and how much we can protect private information is much more important than what kind of service we can provide. Especially, embodiment of U-Police service is a necessary precondition for constructing ubiquitous city in near future. Following studies to draw relevant research results by expanding the objects of the study are much needed including the study on the measurement of efficiency of U-Police service in each service sectors which the UIT applies to.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.2
• /
• pp.391-400
• /
• 2008

There has been increasing interest in developing Structure Health Monitoring(SHM) system based on wireless sensor network(WSN) due to recent advancement in sensor network technologies. SHM is the continuous monitoring of the condition such a acceleration or load of a structure. The SHM system works, which measure key structure parameters systematically, provide information in evaluation of structure integrity, durability and reliability. Currently SHM system collects data via analog sensor and then sends to analysis application through the wired network. The wire system support high accuracy, but suffers the disadvantages in installation costs, complexity of connection and loss of line. It's also difficult to add new sensor nodes. We design and implement the SHM system based on WSN technology to solve those problems.