• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2000.06a
• /
• pp.241-246
• /
• 2000

최근 들어 집중호우 및 게릴라성 호우 등 이상강우로부터 야기되는 급격한 하천유량의 증가는 교량에서의 세굴에 대한 안정성 여부에 큰 문제를 야기하고 있다. 홍수시에는 유량이 교량의 상관 위로 월류하게 되는 경우가 생기게 되며, 수심의 증가에 따라 상판의 일부분 또는 전체가 물이 잠기게 된다. 이때의 흐름은 압력흐름 상태를 가지게 되어 세굴의 발달을 더욱 크게 만들게 된다. 흥수시 압력흐름에 대한 위험은 일반 흐름에서보다 훨씬 크며 100년 빈도의 홍수사상일 지라도 그 효과는 500년 빈도의 홍수사상보다 더욱 크게 될 것이다. 기존의 세굴에 대한 연구의 대부분은 자유수면을 기초로 하고 있으며 이에 따라 많은 세굴방정식들도 자유수면에 대해서만 이루어지고 있다. (중략)

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.10a
• /
• pp.384-390
• /
• 2003

현재 우리나라에서 공용중인 강철도교의 50% 이상이 공용기간 50년 이상 경과된 교량으로 구성되어 있지만 실교량에서 각 부재별 실측자료의 축적이 미흡한 실정이어서 유지관리시 구조물의 특성을 충분하게 반영하는 정량적인 평가가 체계적으로 이루어지고 있지 않은 실정이다.(중략)

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.671-679
• /
• 2016

Bridges, which constitute one of the key facilities in a social infrastructure, are easily accessed and used by users, so that keeping their performance above a certain level is essential. According to various cases in the U.S., Japan and Europe with a long construction history, it is expected that the maintenance cost of bridges in Korea will increase continuously in the future, so a rational decision making system based on engineering factors is necessary to optimize the performance of and maintain them by allocating the limited budget efficiently. This study is a preliminary basic study for the purpose of developing a common asset management system for managing all of the bridges and maintaining the level of service provided by them. The scope of this preliminary study is limited to bridges in urban areas. The bridge asset management system for bridges in urban areas, their level of service (LOS) and performance measure (PM) were developed by carrying out a workshop consisting of both experts and stakeholders. The analysis on the weights of the value and performance measure for each performance indicator was carried out by using the multi-attribute utility theory and the AHP method. In order to confirm the application of the weight of the performance measure and value of the performance indicator, six bridges in an example city were selected, LOS analysis was applied and its results were reviewed.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.638-641
• /
• 2006

In this paper, A calculating cost method of maintenance and repair for bridge which is built up by new construction technique named Up-Down Precast Concrete(UDPSC). After 2000, 109 Bridges which are using UDPSC technique have been built up, 37 bridges's construction work are processing, and 194 designs are presented for construction. Because this technology has developed recently, there are few field data for analyzing the maintenance and repair cost. Therefore, the maintenance and repair cost is computed using Construction and Transportation Ministry's guide line for computation and former research's data.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.4
• /
• pp.102-110
• /
• 2010

The reliability evaluation may be a efficient method for estimating of the quantitative structural safety considering the effect of uncertainties included in high-speed railway bridges. The expected life-cycle cost(LCC) based upon the reliability evaluation will reasonably offer the safety level and design criteria of high-speed railway bridges. Therefore, this study determined the expected life-cycle cost and optimal design method of high-speed railway bridges on the basis of the result of the numerical analysis and reliability evaluation. For this, after creating various design method based upon the standard design of high-speed railway bridges, the numerical analysis is conducted on each of the alternative design methods. The reliability evaluation by the design strength limit state function is conducted considering the effect of external uncertainties on the basis of the numerical analysis result. The expected life-cycle cost of high-speed railway bridges is calculated on the basis of the reliability evaluation result by each of the alternative design methods. Also, the optimal design method is determined using the calculated expected life-cycle cost. In addition, The result of reliability evaluation and expected life-cycle cost of optimal design method are examined considering the effect of internal uncertainties. It is expected that the result of this study can be used as a basic information for the systematic safety evaluation and optimal structure design of high-speed railway bridges.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.3
• /
• pp.283-294
• /
• 2011

The variation of temperature in the steel girder bridge by air temperature is measured. A correlation between the daily temperature range, the maximum and minimum temperatures of the day, and the temperature of the bridge are analyzed. With the statistical data from the Korea Meteorological Administration, the temperature correlations analyzed in this study is able to predict temperature variations between the upper flange and the lower flange which calculates the realistic displacement values of a movable support and an expansion joint in design.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.3
• /
• pp.63-70
• /
• 2008

The purpose of this study is development of bridge design guidelines in Kangwondo mountain area. Much damages heve been wrought by Typhoon Rusa(2002), Maemi(2003), Ewinniar(2006) and severe rain storm in July 2006 in Kangwondo mountain area. The partial cause of these much damages are not consider the regional and geomorphologic condition of river in Kangwondo mountain area. Most of the bridge damages were caused by severe wash out the foundation of pier and abutment. As other reasons, dead trees, branches of the trees and floating materials were catched by pier and deck which make difficult or cut off the flow. Design guidelines are presented by analysis the types and reasons of damages of the disaster.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.1
• /
• pp.77-85
• /
• 2001

본 연구에서는 차량하중에 의한 상시진동기록을 이용한 교량의 손상추정기법을 연구하였다. 즉, 차량진행 중 측정된 신호로부터 구조물의 모드특성을 구하고, 이를 이용하여 손상위치 및 손상정도를 추정하는 알고리즘을 제안하였다. 제안기법의 검증을 위하여 차량하중을 재하할 수 있는 모형교량을 제작하여 손상실험을 수행하였다. 차량진행 중 교량의 수직가속도를 계측하였으며, 측정된 가속도시계열로부터 random decrement(RD) 기법을 사용하여 자유진동신호를 구한 후, 이로부터 구조물의 모드특성을 추정하였다. 추정된 모드특성을 기초로 신경망기법을 적용하여 손상위치 및 손상정도를 추정하였으며, 추정된 결과는 실제 손상과 비교적 잘 일치하였다.

• Journal of the Society of Disaster Information
• /
• v.8 no.1
• /
• pp.81-92
• /
• 2012

In this study, in-depth site investigation related to design and construction of pile foundation was carried out, especially with respect to 103 large-scale bridges located in South Korea. As a result, the depths and location of investigation was unsatisfactory at the foundation investigation process. Moreover, pile load tests were not performed when the capacity of the file is calculated in planning phase, and it was difficult to determine the load capacity limit due to the fact that loading capacity was not specified in pile-loading test. The design criteria related to pile foundation does not reflect the reality of the construction site, and that causes over design, and economic inefficiency in budget. Therefore, the purposes of this study is to review case studies related to the bearing capacity of pile foundations and suggest improvements in the construction specifications.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.4 s.33
• /
• pp.489-500
• /
• 1997

The number of railway bridges in Korea reaches to about 3,000. Among them, the ratio of steel bridges is about 47%. Most of the long span railway bridges take the truss type, its number is 15 in Korea. These bridges have more than 30 years service life, it is expected that the damages of cracks and corrosion is going. Therefore, the estimation of fatigue life with random stress is considered as significant subject in maintenance. In this paper, the random stress was measured in bridges and counted the stress cycles using the rainflow counting method So, the stress range frequencies and their equivalent stress are obtained and the amplification factor for the span length, bridge types and traveling speed is assessed by the dynamic testing. From the results, the stress range of the stringer and the lower chord is higher than the other members and the characteristics of the stress histogram is varied to the loading system and the amount of the passing through trains. And the impact effects are depended on the traveling speed as well as the span length.