• Proceedings of the Optical Society of Korea Conference
• /
• 2007.07a
• /
• pp.289-290
• /
• 2007

We have theoretically derived a electrical model and extracted a parasitic parameters of leakage current in InGaN/GaN light emitting diodes (LEDs). The parasitic parameters of our LED are $R_p=10^{10}{\Omega}$, $I_{0,2}=10^{-17}A$ and $n_2=3.6$, which provide information of leakage current.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.258-259
• /
• 2003

최근 수년간 polarimetry, Raman spectroscopy, near infrared (NIR) absorption spectroscopy, NIR scattering, optoacoustics 등의 방법을 통하여 비침습적으로 Glucose의 농도를 측정하려는 연구가 많이 시도되었다. 일반적으로 이들 방법은 sensitivity 와 signal-to-noise ratio가 매우 낮고 복잡한 알고리즘이 요구되어져 glucose 농도 측정에 한계가 있음이 드러났다. 본 연구에서는 polarization sensitive low coherence interferometer (PS-LCI) 기법을 이용하여 농도에 따른 stokes parameters를 측정함으로써 비침습적으로 glucose를 측정하는 것이 가능한지 알아보는데 그 목적이 있다. (중략)

• Korean Journal of Optics and Photonics
• /
• v.18 no.2
• /
• pp.155-161
• /
• 2007

A new and simple method of 3-dimensional circuit modeling and analysis is proposed and verified experimentally for the first time by determining 3-dimensional current flow and 2-dimensional light distribution in blue InGaN/GaN multi-quantum well (MQW) light emitting diode (LED) devices. Circuit parameters of the LED consist of the resistance of the metallic film and epitaxial layer, and the intrinsic diode which represents the active region emitting the light. The circuit parameters are extracted from the transmission line model (TLM) and current-voltage relation. We applied the >> proposed method and extracted circuit parameters to obtain the light emission pattern in a top-surface emitting-type LED. The current spreading effect is analyzed theoretically and quantitatively with a variation of the resistance of metallic and epitaxial layers. The emitting-light distribution of the fabricated blue LED showed a good agreement with the analyzed result, which shows the dark emission intensity at the corner of the p-electrode.

• Korean Journal of Optics and Photonics
• /
• v.8 no.6
• /
• pp.492-499
• /
• 1997

We proposed and studied an all-optical switching device made of a bent nonlinear waveguide and an all-optical logic gate made of a bent nonlinear Y-junction. The proposed devices as switch and a logic function are based on the evolution of nonlinear guided wave along a bent nonlinear waveguide. Since the characteristics of beam propagation depens on the nonlinearity, input power and bent angle of waveguide, the characteristics of output power transmission is calculated by variation the such parameters. Furthermore, by calculating the output power through the nonlinear media with different positions of detector in nonlinear media, we could find the ideal digital switching performance at specific position of detector and implement several all-optical logic functions (AND, OR, XOR) by power contrast between waveguide end and nonlinear media.

• The Optical Journal
• /
• s.107
• /
• pp.62-67
• /
• 2007

일반적으로는 지립의 작용으로 연마가 진행되기 때문에 기계적인 미세 절삭이 주된 작용을 하고 이 작용에 화학적인 작용이나 국부적인 유동 작용이 복잡하게 더해지는 것으로 생각된다. 그러나 이 연마 메커니즘의 상세한 내용에 대해서는 해명이 시도되고 있지만 불명료한 점이 많은 게 사실이다. 이 때문에 복잡한 연마 메커니즘을 기본으로 설명을 진행하는 것보다 여기에서는 연마의 몇 가지 파라미터 중 연마 공구의 크기에 주목해 비교적 큰 연마 공구(가공물 지름과 같거나 그 이상)를 이용하는 연마 가공 방식과 비교적 작은 연마 공구(가공물 지름의 1/3 이하 정도)를 이용하는 연마 가공 방식으로 크게 나누어 광학 유리의 경면 연마에 관해 개략적으로 설명하겠다. 또 이 밖에 최근 과학 유리의 경면 연마나 연마 이외의 가공에 대해서도 개략적으로 설명하겠다.

• Korean Journal of Optics and Photonics
• /
• v.7 no.1
• /
• pp.77-86
• /
• 1996

We employ the SOR method to analyze CPW electrodes of Ti:$LiNbO_3$ Mach-Zehnder traveling-wave optical modulator in the tapered region of an optical modulator. In the tapered region of the modulator, we design the electrodes satisfying $Z_c=50{\Omega}$. In the modulation region, we find two find sets of design parameters. One set is for $Z_c=50{\Omega}$, $n_{eff}=2.26$ and the another is for $n_{eff}=2.2$, $Z_c=47.7{\Omega}$.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.506-510
• /
• 2003

SMB(simulated moving bed) chromatography system has been developed to realize continuous separation and save solvent consumption for binary mixture in especial. The parameters of SMB chromatography system can be calculated from mass balance equations of true moving bed chromatography, and they are used in design of 6-column SMB chromatography. We can separate S-ketoprofen enantiomer as a raffinate product in 85% of purity and 0.3mg/ml using assembled SMB chromatography system.

• Tunnel and Underground Space
• /
• v.27 no.1
• /
• pp.58-68
• /
• 2017

According to the development of optical technology, the capacity of LIDAR equipments has been greatly improved to get rock mass characteristics precisely and accurately enough and it has been lightened and popularized so that it can be easily used in the field. In this study, we examined the applicability of roughness measurement for joints in a rock slope using LIDAR technique. A triangular irregular network was constructed using LIDAR and a patch, which is a plane structure of discontinuity on rock mass measured from LIDAR scanning, was extracted to estimate the roughness of the rock slope. Four different kinds of roughness parameters were analyzed to find out their correlation with JRC for various point intervals. Among them, $R_s$ parameter was used to measure the roughness of a patch. Regression analysis between four roughness parameters and JRC with respect to point interval was performed. All the roughness parameters decreased with the increase of point interval. In addition, the parameter value showed greater decrease for rougher surfaces. A method of roughness measurement using $R_s$ parameter on rock slope discontinuities was suggested which showed slight overestimation of the real roughness value.

• Korean Journal of Optics and Photonics
• /
• v.11 no.2
• /
• pp.130-134
• /
• 2000

In this paper, the configuration of a reflectIve bistable tWIsted nematic (BTN) liquid crystal cell is optmnzed for high contrast and high brightness operation. We searched for the optimum opncal parameters of a reflective BTN cell by calculating its optical performances at 3 wavelengths; red, green, and blue. By studying the effect of each optical parameter on the optical performances, we found that the angle of !he polmlzer IS more important than any other opnea! parmlleters iu the deSIgn of a reflective BTN cell. We fablicated a reflective BTN cell with a wide-band retardation Him, whose measmed contrast ratio is 10.6: 1. .6: 1.

• Korean Journal of Optics and Photonics
• /
• v.15 no.4
• /
• pp.375-384
• /
• 2004

Switching phenomenon of a three-waveguide optical coupler was analyzed by using the coupled mode theory, and the coupling-length of the device was calculated by means of the FDM. CPW traveling-wave electrodes were designed by the CMM and SOR simulation techniques so as to satisfy the conditions of phase-velocity and impedance matching. Traveling-wave modulators were fabricated on a z-cut LiNbO$_3$ substrate. Ti was in-diffused in LiNbO$_3$ to make waveguides and Au electrodes were built on the waveguides by the electroplating technique. Insertion loss and switching voltage of the optical modulator were about 4 ㏈ and 15.6V. Network analyzer was used to obtain S parameters and corresponding RF response. From the measurement, parameters of the traveling-wave electrodes were extracted as such Z$_{c}$=39.2 $\Omega$, Neff=2.48, and a0=0.0665/cm((GHz) (1/2)). The measured optical response R(w) was compared with the theoretically estimated and both responses were shown to agree well. The measurement results revealed that the ㏈ bandwidth turned out to be about 13 GHz.