• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.11a
• /
• pp.434-435
• /
• 2002

에어로졸 입자의 크기 분포를 측정하는: 방법은 여러 가지가 있다. 이중 광학 입자계수기(Optical Particle Counter)는 직경 0.3-25$\mu\textrm{m}$의 입자의 산란광의 강도를 측정하여 입자의 크기별 개수를 측정하는 기기로 청정지역의 대기 중 부유하는 입자의 측정에 널리 사용되고 있다 (전영신 등, 1999). 본 연구에서는 기상청 기상연구소에서 측정한 광i부 입자계수기(HYAC/ROYCO 5230)의 측정자료를 이용하여 2001년도 1년간 서울의 대기 에어로졸의 특성과 경향을 분석하였다. 측정결과는 대기환경월보(환경부, 2001) (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2006.07a
• /
• pp.387-388
• /
• 2006

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2160-2162
• /
• 2005

중성자 발생을 위한 구형 집속빔 핵융합 장치 방전의 실험적 결과들이 제시되었다. 실험 장치는 직경 22cm, 높이 20cm의 진공용기 안에 동심원적으로 위치한 구형 양극과 grid 음극으로 구성된다. 진공용기에 아르곤 기체를 주입하고, grid 음극에 펄스 전압을 인가하여 방전을 발생시켰다. 다양한 grid 음극에 대한 방전의 실험적 결과들이 전자적, 광학적으로 측정되었다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.38-39
• /
• 2000

이번 연구에서 사용하는 레이저 다이오드는 emitting area가 1$mu extrm{m}$ $\times$100$\mu\textrm{m}$이고 출력 beam의 세기가 0.1 Mw/$ extrm{cm}^2$ 이상이어야 하기 때문에 출력 beam의 spot size가 약 637$\mu\textrm{m}$$^2$이하를 가지도록 해야한다. 즉 28.5$\mu\textrm{m}$정도의 직경을 가지는 디스크 형태의 spot모양이 이상적이라 할 수 있겠다. (중략)

• Korean Journal of Optics and Photonics
• /
• v.20 no.6
• /
• pp.311-318
• /
• 2009

We present an attractive real time in-vivo endoscopic microscope with a resolution of submicron, in which two kinds of optical correcting plates are inserted to eliminate higher order spherical aberration and field curvature. And, since the conventional objective lens is replaced to GRIN lenses with diameter of 1 mm, the above endoscopic microscope can be effectively utilized to invade minimally for live animals.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.549-554
• /
• 1997

원자력발전소 중기발생기 전열관 sleeve의 레이저 보수용접은 원자로 외부의 레이저 광원을 sleeve 내부의 용접 head까지 광섬유로 수백 미터를 전송하여 수행된다. 전열관 레이저용접은 용접 중의 레이저출력, 레이저 전송 광학계의 파손여부, 광학계의 정렬상태 등을 정확히 감시하여 수행하여야 하지만, 작업공간의 협소함과 방사능 구역이라는 어려움 때문에 실시간 감시가 쉽지 않다. 본 연구에서는 광섬유 전송 광학계와 지시용 레이저를 이용하여, 광섬유의 끝단에서 반사된 레이저 빔을 이용하여 광섬유 상태를 실시간 감시할 수 있음을 실험적으로 확인하였다. 실험은 core 직경 800um 의 step index 레이저 전송용 광섬유를 사용하였으며, 광섬유 끝단에 물등의 불순물이 있을 경우와 광섬유가 파손되었을 경우의 감시결과를 얻어, 광섬유 광학계의 실시간 감시가 가능함을 보였다.

• Korean Journal of Optics and Photonics
• /
• v.15 no.2
• /
• pp.158-170
• /
• 2004

Wireless optical communication is expected for high-speed optical communication in the areas of saturated optical fiber communication and low population density. In this paper, we present an optical transmitter system for wireless optical communication with new design concepts different from the usual optical imaging system. The specifications are the following: the source is a laser diode(LD) of wavelength 830 nm in which the divergent angle from the tangential plane differs from that from the sagittal plane. Here, the requested transmission distances are very long range such as 500 m to 1500 m and beam diameter is 3 m at the receiver with symmetrical energy distribution. For the evaluation characteristics of this kind of non-imaging system, two optical quantities, the relative illumination distribution and energy transfer efficiency, are numerically calculated through lots of ray tracing.

• Korean Journal of Optics and Photonics
• /
• v.16 no.1
• /
• pp.50-55
• /
• 2005

A method for measuring the wavefront error and the modulation transfer function(MTF) of large aperture optics using an unequal path interferometer is presented. A bidirectional shearing interferometer is used for collimation testing of the measurement system. A large aperture Fizeau interferometer with long optical path difference measures the wavefront error of the optics under test by using a $\Phi$ 400 mm off-axis parabolic mirror. The MTF is also measured at the wavelength of the interferometer by changing the laser light into partially incoherent light. Test results of a $\Phi$ 300 mm Cassegrain type satellite telescope made in Korea are presented.

• Korean Journal of Optics and Photonics
• /
• v.34 no.5
• /
• pp.185-191
• /
• 2023

We report the results of evaluating the hardness, flexibility, and adhesion between the protective layer and the stealth sheet after applying a protective layer to improve the practicality of the flexible stealth sheet. The result of the ISO 15184 pencil hardness test showed that the hardness increased from HB to 3H by three grades when a protective layer was applied. The flexibility evaluation was conducted by bending the material against cylinders of certain diameters and observing whether cracks occurred according to the ASTM D522 test method. The result showed that the minimum diameter was 0.125 inches. The adhesion was evaluated by using the ASTM D3359 test method, attaching and peeling off an adhesive strip to the protective layer and determining the proportion of the protective layer peeling off. The result was 5B, which is better than the military adhesion limit of 4B.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.2
• /
• pp.255-264
• /
• 2022

The conventional spot-type UV curing machine configures a collimator optical system using a plurality of lenses so that the light beam is incident through an optical cable. In order to increase the transmission light efficiency, a collimator optical system composed of three or more lenses is required, and accordingly, it is difficult to align the optical system, and it is difficult to implement the system compactly. In this study, a single TIR lens collimator that can realize the same level of spot diameter and light efficiency as the conventional collimator optical system composed of three lenses was designed. Through this, the light efficiency at the curing area with the minimum illuminance deviation was 33.2 %, which was similar to the performance of the reference collimator optical system, and the illuminance deviation on the curing area was 18.8 %, ensuring acceptable performance. In addition, by arranging a fly-eye lens with field flattening function at the front end of the condensing lens, the effective curing area diameter was reduced from 5.0 mm to 3.0 mm, enabling higher curing energy density to be realized. In addition, it was confirmed that the illuminance deviation can be greatly improved to a level of 14.4%.