• The Journal of Dong Guk Oriental Medicine
• /
• v.9
• /
• pp.35-49
• /
• 2000

Purpose: This study is to investigate the alleviation effects of Daebangpoongtang in LPS induced arthritis in mice knee joint. Methods : Daebangpoongtang was chosen to treat the arthritis caused by injecting $300{\mu}g/kg$ LPS to mice knee joint. The control group had no treatment, while the LPS group was injected $300{\mu}g/kg$ LPS to mice knee joint and the DBP group was oral administrated of Daebangpoongtang. After injection of $300{\mu}g/kg$ LPS to mice knee joint, the alteration of synovial lining cell, vessel, fibrosis, distribution of collagen fiber, fibroblast, mast cell, infiltration of inflammation component cell and distribution of ICAM and VCAM was observed by light microscope(BX50). Results : In the DBP extract treatment group, the distribution of vessel, the enlargement of synovial lining cell layer, the synovial lining cells with filopodia, the fibrosis, the distribution of fibroblast in synovial membrane, the distribution of TCAM and VCAM on the knee joint was less than that of LPS group. Infiltrated lymphocyte into the apical surface had not observed in the DBP extract treatment group. The distribution of mast cell was as same as control group(no treatment group) and it showed granulated type. Conclusion: According to the above results, it might be considered that the administration of Daebangpoongtang has a curative effect on synovial membrane injury in arthritis by inhibiting increase of vessel, cell adhesion molecule(ICAM and VCAM) in LPS induced arthritis.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.1
• /
• pp.44-50
• /
• 2013

E-glass fiber is the most widely used glass fiber for reinforced composite materials of aircrafts, automobiles and leisure equipments. But recently researches are being progressed to reduce boric oxide from 8 % to 0 (zero), as is called 'Boron free E-glass', because of increasing material cost, environmental problem, and improving chemical resistance and mechanical properties of E-glass fiber. In this study, we fabricated the bulk glass and fiber glass of 'Boron free E-glass (BF) compositions', and characterized thermal properties and optical properties. 'Boron free E-glass (BF)' was obtained by the melting of mixed batch materials at $1550^{\circ}C$ for 2 hrs with different $Al_2O_3$ compositions 5~10 %. We obtained transparent clear glass with high visible light transmittance value of 81~86 %, and low thermal expansion coefficient of $4.2{\sim}4.9{\times}10^{-6}/^{\circ}C$ and softening point of $907{\sim}928^{\circ}C$. For the chemical resistance test of 'BF' fiber samples, we identified that the higher alumina contents gives the better corrosion resistance of glass fiber.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.4
• /
• pp.11-18
• /
• 2008

Anatomical characteristics of volumetric composition, fiber length, vessel diameter, and crystalline properties of cellulose in kenaf (Hibiscus cannabinus L.) planted in the reclaimed land of Buan-si, Korea were examined to understand the growth characteristics using a light microscopy and an X-ray diffraction method. The samples of kenaf were taken from six positions (3 cm, 35 cm, 70 cm, 105 cm, 280 cm, and 320 cm) of each stem over the growth period (July, August, September, and October) after seeding in the mid-May. In the kenaf stem, phloem constituted 10 to 15 %, xylem 66 to 82%, and pith 7 to 19%. The ray, bast fiber, and remainder comprised 50%, 20%, and 30% of the phloem, respectively. The volume of vessel, ray, and fiber in the xylem was approximately 10, 15, and 75%, respectively. The proportion of cell wall was 30.92% at the base of stem and 46.40% at the top of stem, respectively. The average length of bast fiber and xylem fiber was about 2.8 mm and 0.9 mm, respectively. Radial and tangential diameters of vessel increased with the increase of growth period, while they decreased with increasing the stem height. Relative crystallinity ranged from 70 to 79% in phloem and from 50 to 56% in xylem. Cellulose crystallite width was about 3 nm both in the phloem and xylem. Thus, the volumetric composition and cell dimensions in the phloem and xylem appeared to be varied with the growth period and the stem height.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.43-49
• /
• 2007

Anatomical properties of Kenaf (Hibiscus cannabinus L.) planted in a reclaimed-land of Korea were examined to understand the growth characteristics by an optical and scanning electron microscopy. The samples of kenaf were taken from four positions of the stem (3, 35, 70, 105 cm above from the ground) in four growth periods (July. August, September, October) from seeding planted in the middle of May. Bast fiber, phloem rays, cortex parenchyma cells and sieve tube members were observed in phloem, and vessel elements, fibers and rays in xylem. Solitary and multiple radial pores existed in xylem. The cell types of ray parenchyma in radial section were procumbent, upright, and square. The intervascular pitting showed an alternate type. Xylem proportion, the number of bast fibers and dimension of phloem rays increased with increasing growth period, and decreased with increasing stem height. The proportion of multiseriate rays was higher than that of uniseriate and biseriate rays in xylem with increasing growth period. On the other hand, The proportion of multiseriate rays was lower than that of uniseriate and biseriate rays in xylem with increasing stem height.

• Polymer(Korea)
• /
• v.36 no.4
• /
• pp.531-535
• /
• 2012

Conductive polyaniline (PANI) nanofibers in UV-curable resin were used for a transparent conductive film. The emeraldine-salt PANI (ES-PANI) nanofibers were prepared by chemical oxidation polymerization of aniline, which could be changed into emeraldine-base PANI by dedoping. EB-PANI nanofibers as a precursor for conductive fillers were thereby transformed into re-dpoed PANI (rES-PANI) by dodecylbenzenesulfonic acid in the UV-curable resin solution. rES-PANI nanofibers have high conductivity and long-term stability in the solution without a defect of nanostructure. The resulting conductive resin solution was proved to be highly stable where no precipitation of rES-PANI fillers was observed over a period of 3 months. The transparent film was spin-casted on a poly(methyl methacrylate) sheet of thickness ca. $5{\mu}m$. A surface resistance of $6.5{\times}10^8{\Omega}/sq$ and transmittance at 550 nm of 91.1% were obtained for the film prepared with a concentration of 1.4 wt% rES-PANI nanofibers in the solution. This transformation process of rES-PANI from ES-PANI by dedoping-redoping can be an alternative method for the preparation of an antistatic protection film with controllable surface resistance and optical transparencies with the PANI concentration in UV-curable solution.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.6
• /
• pp.706-715
• /
• 2012

Electro-optical sigma-delta modulators are the core module of digital receiver to digitize wideband radio-frequency signals directly at an antenna. Electro-optical sigma-delta modulators use a pulsed laser to oversample an input radio-frequency signals at two Mach-Zehnder Interferometer(MZI) and shape the quantization noise using a fiber-lattice accumulator. Decimation filtering is applied to the quantizer output to construct the input signal with high resolution. The jitter affects greatly on reconstructing the original input signal of modulator. This paper analyzes the performance of first order single bit electro-optical sigma-delta modulator in the time domain and the frequency domain. The performance of modulator is analyzed by using asynchronous spectral averaging of the reconstructed signal's spectrum in the frequency domain. The reference value of time jitter is presented by analyzing the performance of jitter effects. This kind of jitter value can be used as a reference value on the design of modulators.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.57-57
• /
• 2011

본 실험에서는 메타 아라미드 섬유의 basic dye에 대한 염색성 특히, 물과 acetophenone을 적용한 수계 염색과 친환경 염색 매개체인 이산화탄소 초임계유체를 사용한 염색을 수행한 후에 염색된 시료에 대한 염색성을 평가하였다. 수계염색의 경우, co-solvent carrier로 acetophenone 사용하였으며, 초임계유체 염색에서는 ethanol을 co-solvent로 사용하였다. 염색된 시료의 염색성 평가는 색차계를 사용하여 실시하였으며, 최대흡수파장에서 표면반사율에 따른 Kubelka-Munk식을 적용하여 K/S값을 계산하였다. 수계 및 초임계 염색에 의해 염색된 시료가 동일한 K/S 값을 가지기 위해서는 초임계염색이 상대적으로 높은 농도의 염료가 요구되어졌다. 또한 UV-vis. 분광분석법과 광학현미경을 통한 염색시료의 염색성의 평가가 이루어졌다.

• Journal of radiological science and technology
• /
• v.27 no.1
• /
• pp.13-16
• /
• 2004

대장내시경검사는 역사적으로 돌아보면 원래 히포크라테스의 치루치료과정에서 직장경 사용으로부터 유래되며 그 후 Kelly의 25 cm 표준 S상 결장경의 발견으로 진전되었고 조명 및 각종 부속기구들이 많이 개선되면서 직장암의 발견에 기여해 왔다. 1911년에 독일 뮌헨의 Michael Hoffman이라는 광학 기술자가 프리즘을 여러 개를 연결하면 직선이 아닌 곡선에서도 빛을 그대로 전달할 수 있다는 사실을 발견하였고 이를 기초로 하여 1958년에 미국에서 Hirschowitz가 처음으로 섬유경(fiberscope)을 선보였고 그 이후 이용한 상부소화관에 대한 내시경 기술이 급속히 발전하기 시작하였고, 이를 기초로 1969년부터 ACMI, Olympus, Fujinon, Pentax 등 세계 유수의 내시경 회사들이 대장내시경을 제작하기 시작하였다. 1983년에 미국의 Welch-Allyn사가 CCD(Charge Coupled Device)라는 집광 장치를 만들어서 마치 내시경의 눈과 같은 작용을 해서 이것을 내시경 선단에 장치하고 전파를 이용하여 영상을 전달하여 이 상이 TV 모니터에 비치는 것을 보게 되는 전자내시경을 개발하여 현재는 상부내시경 뿐 아니라 대장내시경도 대부분이 전자 내시경으로 대체되어서 오늘에 이르고 있다.

• The Korean Journal of Zoology
• /
• v.35 no.4
• /
• pp.414-427
• /
• 1992

Octopus variabilis의 흡반을 광학현미경과 주사전자현미경 그리고 투과전자현미경을 이용하여 그 미세구조를 관찰하였기에 이에 보고하는 바이다. 또한 내측상피 부위 돌기구 조물 속에서 관찰된 세포들은 핵을 둘러싼 세포들이 공포화 현상으로 인하여 해면처럼 보였다. 이 세포들은 감각과 수축에 관여하는 해면질성인 세포로 생각된다. 외측 상피조직에서는 2종의 분비성인 감각세포(A 및 B형세포)차 2종의 상피성인 감각세포(C 및 D형세포)가 관찰되었다. 분비성인 감각세포는 감각이외에 점액분비 기능을 소지하였으며, 상피성인 감각세포는 상피의 지지와 감각기능을 수행하는 것으로 생각되었다. 흠반을 구성하고 있는 근섬유는 중앙이 기린 도나스 형태로서 10-15개의 종선이 나타났다. 또한 부위에 따라서는 근섬유들은 서로 집결하여 원주형의 근육 기등을 형성하기도 했는데 이들은 신경섬유에 의하여 서로 연결 되고 통제되었다.

• Journal of Periodontal and Implant Science
• /
• v.23 no.3
• /
• pp.577-594
• /
• 1993

The ultimate goal of periodontal therapy is the regeneration of the periodontium that have been destroyed as a result of periodontal disease. This study were done in order to determine the healing status of periodontium under Polytetrafluoroethylene and millipore fillter combined with fibrin and the effect of the guided tissue regeneration procedures were performed as follows : 1) flap operation using PTFE membrane(control group) 2) flap operation using PTFE membrane which was fixed with fibrin(experimental group 1) 3) flap operation using millipore filter which was fixed with suture(experimental group II) 4) flap operation using millipore filter which was fixed with fibrin(experimental group II) After 1, 2, 4, 8, 12 weeks, dogs were sacrificed by perfusion technique and tissue block was excised including the tooth and prepared for light microscope with H-E & Masson’s trichrome staining. The result were as follows : In control and experimental group, there is no siginificant difference on epithelial cell down growth within 1st week, but more epithelial cell downgrowth in millipore or millipore combined with fibrin group. In this experiment, there were no significant difference in new cementum and alveolar bone formation whether PTFE membrane was fixed with suture or fibrin. In control and each experimental group, bone maturation appeared in 4 weeks, bone width increased bucco-lingually in control and experimental 1 group especially. Both control group and experimental group showed mild mew cementum formation on root surface and irregular arrangement of collagen fiber at 4 weeks, that showed obvious increased cementum formation at 8 weeks, and that was observed the functional arrangement of collagen fiber between new cementum and new alveolar bone at 12 weeks.