• Proceedings of the KIPE Conference
• /
• 2011.11a
• /
• pp.205-206
• /
• 2011

태양광 발전용 마이크로 인버터는 PV 모듈에 직접 설치되기 때문에 크기, 무게 등이 중요한 설계 요소다. 따라서 출력 필터 설계 시 전력 품질 뿐만 아니라 필터에 사용되는 수동 소자의 크기 또한 고려해야 한다. 본 논문에서는 마이크로 인버터용 출력 필터로서 Trap-CL 구조를 분석하고, 필터의 소형화를 고려한 설계 기법을 제안한다. 설계 된 Trap-CL 필터의 특성을 단상 플라이백 인버터에 적용하여 확인하였으며, 기존 플라이백 인버터에 사용되던 CL 필터와의 비교를 통하여 그 타당성을 검증하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.121-121
• /
• 2004

최근 급속히 성장하고 있는 광통신산업의 발전에 있어서 주목할 만한 경향 중에 하나는 제품의 소형화 및 집적화라 할 것이다. 마이크로 광모듈 접속/조립 시스템은 광모듈을 소형화하고 고기능성 광통신 부품의 개발에 있어 가장 필요한 장비이다. 이에 본 연구에서는 초소형 광모듈 접속/조립 시스템을 개발하기 위하여 두께가 약 30 $\mu\textrm{m}$인 박막형 필터와 렌즈일체형 파이버를 접속/조립할 수 있는 시스템을 개발 및 초소형 광통신용 1$\times$1 OADM(Optical Add/Drop Module) 모듈을 제작하였다.(중략)

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.9
• /
• pp.111-118
• /
• 2004

The automatic assembly system of micro optical filter is a key technology in the development of optical modules with high functionality. In order to develop an automatic assembly system of optical fiber and filter, we have firstly developed the system and program capable of characterization of 30${\mu}m$-thick film filters as well as conventional optical filters. Moreover, we have carried out the characterization of optical filter using the developed system and program, and compared experimental results with by conventional handwork. The measurement of optical filters using the present system is faster, more precise and more reliable than those based on the conventional handwork.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.4
• /
• pp.56-64
• /
• 2000

The design of filters for pattern recognition that have optimal trade-off for the criteria of noise robustness, peak sharpness and Homer efficiency, when input scene noise is spatially disjoint (nonoverlapping) with the target, are presented Three different criteria, ie, signal-to-noise ratio, peak-to-output energy ratio and light efficiency are used to design the filter. Computer simulation is made for the various types of noise and parameters to illustrate filter performance for optical pattern recognition. When we compare the new trade-off filter with the original optimal trade-off filter, the performance of trade-off filter for nonoverlapping background is better than that of trade-off filter for overlapping background.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.2
• /
• pp.213-217
• /
• 2015

Microwave Photonic(MWP) filters capable of use a bandpass filter or a notch filter with large bandwidth have been proposed. 4-lines${\times}$2-bit fiber-optic delay lines with a unit time-delay difference of 50 ps were experimentally realized. By changing the time-delay difference and the coefficients of microwave-modulated optical signals, the bandpass and notch filters were implemented and characterized.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.364-365
• /
• 2018

본 논문에서는 LCL 필터를 가지는 계통연계형 태양광 인버터의 필터에 의한 공진을 억제하는 기법을 제시하였다. 기존의 L 필터보다 LCL 필터가 높은 고조파 저감 효과를 가지지만 LC 필터가 추가됨으로써 발생하는 공진으로 인해 시스템은 불안정해진다. 공진을 억제하기 위해 댐핑 기법이 함께 사용된다. 능동 댐핑은 수동 댐핑에 비해 실제 저항이 추가되지 않음으로써 회로의 손실을 저감하는 장점이 있다. 적절한 설계 기법을 통해 공진을 억제하고 시스템의 안정성을 높였으며 시뮬레이션을 통해 제안한 방식의 타당성을 검증하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.218-223
• /
• 2016

This study examined the order of the Butterworth filter for the correlation on the sensitivity of the receiver in the receiver of an optical system. In the general case, the sensitivity of the receiver is increased if the order of the filter was increased more. This is because increasing the order of the filter response of the normalized frequency of the filter is similar to the rectangular wave. For that reason, the method used to increase the order of the filter increases the sensitivity of the receiver. On the other hand, a method of increasing the order of the filter and makes the system complicated increases the cost of the system. This study examined the correlation between the order of the sensitivity of the receiver filter and to configure the system by simply looking for ways to reduce the cost of the system. The simulation results showed that increasing the order of the filter resulted in a receiver that can determine if the sensitivity is raised. In addition, the order of the Butterworth filter range that does not reduce the sensitivity of the receiver was 2. Therefore, it will be possible to implement an inexpensive optical system of the receiver using the data from this study.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.23 no.1
• /
• pp.59-66
• /
• 2021

This study aimed to a basic research for the development of dye-sensitized solar cells that the wavelength band required for crop growth is passed, and the wavelength band that is not necessary for crop growth can be used for the generation of electricity. The transmissivity according to the illuminance was about 10% higher in the Blue filter and the Green filter than in the Red filter, but the transmissivity according to the PPFD was about 10% higher in the Red filter and the Blue filter than in the Green filter. In addition, the greenhouse attached with 30% infrared blocking filter was predicted to have a lower air temperature than other greenhouses, but it was investigated that there was no significant difference. Therefore, it was investigated that the application of the infrared cut filter would not be appropriate in a greenhouse that controls the temperature by opening a window. As a result of investigating, it was found that the Green and Blue filter greenhouses had the severe overgrowth and the stems grew weaker. The fresh weight of paprika in the infrared blocking filter greenhouse was the highest at 678.9g, and the growth of Red filter and the control greenhouses was relatively poor. Photosynthetic rate, amount of transpiration, and stomatal conductivity were the infrared blocking filter and control greenhouse higher than others. On the other hand, the water use efficiency did not show a big difference.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.5
• /
• pp.418-424
• /
• 2014

We propose and experimentally demonstrate a photonic microwave notch filter with a negative coefficient. The negative coefficient is obtained by using cross gain modulation (XGM) in a reflective semiconductor optical amplifier (RSOA). When the RSOA is operated in saturated region, the signal carried on the pump wavelength is inversely copied to the probe wavelength by the XGM effect, showing a negative coefficient. Time delay between pump signal and probe signal is provided by single mode fiber (SMF) with wavelength dependent time delay. The proposed microwave notch filter shows notch dips of more than 35.1 dB and free spectral range (FSR) of about 380.6 MHz.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.256-257
• /
• 2002

최근 광 스위치, 광학 가변 필터와 같은 광통신용 수동 소자를 구현하기 위해 실리콘 마이크로머시닝 기술을 바탕으로 한 광 MEMS(micro electro mechanical system) 기술이 각광을 받고 있다[1,2]. 특히, 실리콘 기판을 수직 식각하여 제작한 측면 저울은 2$\times$2광 스위치나 광 필터 등에서 반사 평면이나 투과평면으로 많이 이용되고 있다. 광학 평면의 거칠기 특성은 빛의 산란에 의한 광학 손실이나 평행 광 특성 유지 등과 밀접한 관계가 있다. (중략)