• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1432-1433
• /
• 2011

본 연구에서는 나노입자 이산화티타늄을 이용한 광전화학셀을 제작하여 제작된 광전기화학셀의 광전변환특성을 연구 하였다. 광전기화학셀을 제작함에 있어 광전극에는 나노입자 이산화티타늄을 페이스트로 하여 스크린 프린팅 하고 열처리 하였으며 상대전극의 경우 $H_2PtCl_6$를 2-propanol에 10mM로 녹인 용액을 도포하였다. 나노 페이스트와 용액처리를 한 광전극과 상대전극을 접합 후, 전해질을 주입 후 밀봉하여 셀을 제작하였다. 이때 사용된 전해질은 LiI, $I_2$, t-butylpyridine, 1-butyl-3-methylimidazolium iodide, 3-methoxypropionitrile이 사용되었다. 제작한 셀의 광전 변환 효율은 개방전압 Voc는 16.3v, 충진율 FF는 0.65로 나타났으며 이때의 변환 효율 7.55%로 나타났다.

• 세라미스트
• /
• 제18권2호
• /
• pp.45-50
• /
• 2015

• 한국태양광발전학회지
• /
• 제8권1호
• /
• pp.20-30
• /
• 2022

친환경 수소에너지로의 전환은 온실가스 감축, 미세먼지 저감 등을 통해 청정하고 안전한 사회로의 진입을 가져올 것이다. 그러나 현재 주된 수소 생산방식은 이산화탄소를 수반하는 부생수소와 추출수소 방식에 의존하는 형태가 대부분이라, 향후 그린수소 형태로의 수소생산 제조에 관한 기술 상용화 및 경쟁력 방안 확보가 절실한 상황이다. 이에 본 고에서는 광전기화학 기반의 수소생산 기술의 성능 향상과 실효성 개선을 위한 핵심 요소 기술 및 경쟁력 확보방안에 관한 부분을 논하고자 한다.

• 한국수소및신에너지학회논문집
• /
• 제20권5호
• /
• pp.404-409
• /
• 2009

The present works were performed that titanium foil was anodized in various dilution ratios of seawater and distilled water with 10V external voltage applied, then annealed at $450^{\circ}C$ to obtain $TiO_2$ on the Ti substrate. The prepared samples were characterized by instruments (XRD, SEM, and photocurrent) and used to investigate rate of hydrogen production in photoelectrochemical cell as well as Cr(VI) reduction. As the results of experiments, the anodized $TiO_2$ in seawater electrolytes, which are ranged from 15 to 50 times dilution of seawater, was showed a relatively higher hydrogen production (ca. 97~110 umol/hr-$cm^2$) and Cr(VI) reduction (ca. 95% reduction).

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.226-229
• /
• 2009

The present works were performed that titanium foil was anodized in various dilution ratios of seawater and distilled water with 10V external voltage applied, then annealed at $450^{\circ}C$ to obtain $TiO_2$ on the Ti substrate. The prepared samples were characterized by instruments (XRD, SEM, and photocurrent) and used to investigate rate of hydrogen production in photoelectrochemical cell as well as Cr(VI) reduction. As the results of experiments, the anodized $TiO_2$ in seawater electrolytes, which are ranged from 15 to 50 times dilution of seawater, was showed a relatively higher hydrogen production (ca. 97~110 umol/hr-$cm^2$) and Cr(VI) reduction (ca. 95% reduction).

• 대한화학회지
• /
• 제36권1호
• /
• pp.75-80
• /
• 1992

Thiourea, 1-allyl-2-thiourea, NaI 또는 NaSCN 등의 초감응제 존재하에 광전기화학셀, $ITO/SnO_2/eosin$ B, $NaClO_4/Pt$ 을 이용하여 들뜬 eosin B로부터 박막 전도체 $SnO_2$의 전도띠로 주입되는 광전류의 크기를 장시간에 걸쳐 조사하였다. Thiourea 또는 allylthiourea를 첨가하면, 큰 초기 광전류를 나타내지만 시간에 따라 감소한 반면, 흡광도는 오히려 증가하다가 일정시간 후에는 계속 감소하는 특성을 나타내었다. 이를 분광학적으로 조사한 결과 빛을 받아서 흡광도가 더 큰 물질로 변화하므로 흡광도는 증가하나 형광 양자수율이 보다 더 크게 증가하기 때문에 광전류는 감소하는 것으로 밝혀졌다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1485-1486
• /
• 2011

A layer of $TiO_2$ thin film less than ~500nm in thickness, as a blocking layer, was coated by sol-gel method directly onto the anode electrode to be isolated from the electrolyte in dye-sensitized solar cells (DSCs). This is to prevent the electrons from back-transferring from the electrode to the electrolyte (I-/I3-). The effects of heat treatment conditions of the gel and as-coated film on the thickness and consolidation to substrate were studied. The flexible DSCs were fabricated with working electrode of Ti thin foil coated with blocking $TiO_2$ layer, dye-attached mesoporous $TiO_2$ film, gel electrolyte and counter electrode of Pt-deposited indium doped tin oxide/polyethylene naphthalate (ITO/PEN). The photo-current conversion efficiency of the cell was 5.3% ($V_{oc}=0.678V$, $J_{sc}=12.181mA/cm^2$, ff=0.634) under AM1.5, 100 mW/$cm^2$ illumination.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.749-752
• /
• 2009

Anodized tubular titania ($TiO_2$) electrodes (ATTEs) are prepared and used as both the photoanode and the cathode substrate in a photoelectrochemical system designed to split water into hydrogen with the assistance of an enzyme and an external bias (solar cell). In particular, the ATTE used as the cathode substrate for the immobilization of the enzyme is prepared by two methods; adsorption and crosslinking. Results show that the optimized amount of enzyme is 10.98 units for the slurried enzyme, 3.66 units for the adsorbed one and 7.32 units for the crosslinked one, and the corresponding hydrogen evolution rates are 33.04, 148.58, and 234.88 umol/hr, respectively. The immobilized enzyme, specifically the chemically crosslinked one, seems to be much superior to the slurried enzyme, due to the enhanced charge-transfer process that is caused by the lower electrical resistance between the enzyme and the ATTE. This results in a greater number of accepted electrons and a larger amount of enzymes able to deal with the electrons.

• 전기학회논문지
• /
• 제60권3호
• /
• pp.584-587
• /
• 2011

In this work, the $TiO_2$ and $SnO_2$ thin films as blocking layers were coated directly onto the metal-mesh electrode surface to prevent unnecessary inflow of back-transfer electrons from the electrolyte ($I^-/I_3^-$) to the metal-mesh electrode. The DSCs were fabricated with working electrode of SUS mesh coated with blocking $TiO_2$ and $SnO_2$ layers, dye-attached mesoporous $TiO_2$ film, gel electrolyte and counter electrode of Pt-deposited F:$SnO_2$. From the experimental result, it was ascertained that the efficiency of metal electrode coated with $TiO_2$ by Dip-coating was superior to that of metal electrode coated with $SnO_2$ by Dip-coating and screen printing with the results of experiments. The photo-current conversion efficiency of the cell obtained from optimum fabrication condition was 3% ($V_{oc}$=0.61V, $J_{sc}$=11.64 mA/$cm^2$, ff=0.64) under AM1.5, 100 mW/$cm^2$ illumination.

• 한국재료학회지
• /
• 제28권5호
• /
• pp.261-267
• /
• 2018

Hydrothermal synthesis of highly crystalline $TiO_2$ nanorods is a well-developed technique and the nanorods have been widely used as the template for growth of various core-shell nanorod structures. Magneli/CdS core-shell nanorod structures are fabricated for the photoelectrochemical cell (PEC) electrode to achieve enhanced carrier transport along the metallic magneli phase nanorod template. However, the long and thin $TiO_2$ nanorods may form a high resistance path to the electrons transferred from the CdS layer. $TiO_2$ nanorods synthesized are reduced to magneli phases, $TixO_{2x-1}$, by heat treatment in a hydrogen environment. Two types of magneli phase nanorods of $Ti_4O_7$ and $Ti_3O_5$ are synthesized. Structural morphology and X-ray diffraction analyses are carried out. CdS nano-films are deposited on the magneli nanorods for the main light absorption layer to form a photoanode, and the PEC performance is measured under simulated sunlight irradiation and compared with the conventional $TiO_2/CdS$ core-shell nanorod electrode. A higher photocurrent is observed from the stand-alone $Ti_3O_5/CdS$ core-shell nanorod structure in which the nanorods are grown on both sides of the seed layer.